Projects using JB Weld

[Dave G]

Can't really comment! I don't have a TPS input to the CDI. There is a race CDI that does and maybe in the future I'll think about purchasing one, but not sure of any real TPS gains at the moment. It would be nice to get more info frrom you Guys!

[iansoady]

I'll start a new thread re this....

[Dave G]

Good idea, I'll follow it. Nice to know what if any gains there are using the TPS!

[Dave G]

Just remembered this mod I did. When I raised the tank up so that I had clearance for the new engine this had a knockon effect of pushing the seat back due to the tank taper. I got around this by slotting the seat fixing hole, filling it with JB then drilling it out in the new position for the fixing bolt.

WP_20260315_18_56_52_Pro.jpg (3.87 MiB) Viewed 1655 times

[Dave G]

Used some JB in my latest project which now enables me to access the CDI port without removing the seat.

WP_20260319_23_39_59_Pro.jpg (4.14 MiB) Viewed 1567 times

[Dave G]

Lets keep this topic going!. Anybody got any more examples, I don't have anything else in the pipeline at the moment.

[Dave G]

Just in case anybody doesn't know what JB Weld is, here's a Ebay link.

https://www.ebay.co.uk/itm/396281243040

JB Weld.jpg (127.63 KiB) Viewed 1450 times

[Dave G]

Here's another project using JB, not bike related but since no one else has any examples I thought it might keep the topic going for a while. The lions head had a hole at the back of the mouth for a water spout which I wasn't using so decided to make a tongue moulded using JB, some soft ally mesh
and a few ally filings.

WP_20260422_18_46_17_Pro.jpg (462.16 KiB) Viewed 1358 times

Without tongue.

WP_20260422_18_44_51_Pro.jpg (4.62 MiB) Viewed 1358 times

Tongue.

WP_20260422_18_41_13_Pro.jpg (5.03 MiB) Viewed 1358 times

[Dave G]

Used some JB to fill-in some license plate light holes that I drilled incorrectly in a tail tidy. Can't see them now but there somewhere in the red circled area.

Tail_Tidy_holes.jpg (170.19 KiB) Viewed 587 times

WP_20260427_21_11_09_Pro.jpg (3.96 MiB) Viewed 587 times

WP_20260430_23_14_46_Pro.jpg (4.23 MiB) Viewed 587 times