Tamiya Grasshopper, new RC car day.... Build thread.
-
- Posts: 4909
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2618 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
Can you turn the control lever on the handheld radio control box through 180 degrees?
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
Don't believe so... well, apart from using it upside down of course
-
- Posts: 4909
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2618 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
How about reversing the connections on the controller on the inside of the box?
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
No, that's slotted on the unit, so the cabling can only fit one way.
-
- Posts: 4909
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2618 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
Sorry I meant the connections on the joystick. Or turning the joystick through 180 degrees.
WTF I didn't think of using the word before is attributable to my stupidity
WTF I didn't think of using the word before is attributable to my stupidity
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
https://www.carson-modelsport.com/en/pr ... 500500085/
description says
• servo reverse for both channels (reversal of the running direction)
Which implies i can change direction for motor as well as steering servo.
-
- Posts: 4909
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2618 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
That's a tad more complicated than the one I had.
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
Yeah, i'm pretty sure it's just a setting... but i have sod all idea which yet
It's laid up on bench anyhow awaiting decals.
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
SORTED !!
a) “REV” setting (reverse direction of servo rotation) Press the “CH” button and choose between ST, TH or 3C and 4C. Press +/- for normal or reverse.
So, using the CH button, the first click is for ST (steering), click it again and you get TH (throttle), then + to set to 'rev' for reverse throttle..... which is now forwards at full power.
a) “REV” setting (reverse direction of servo rotation) Press the “CH” button and choose between ST, TH or 3C and 4C. Press +/- for normal or reverse.
So, using the CH button, the first click is for ST (steering), click it again and you get TH (throttle), then + to set to 'rev' for reverse throttle..... which is now forwards at full power.
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
-
- Posts: 4909
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2618 times
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
LOL you've met me, i'm a ham fisted monkey.... that's the wifes job later.
-
- Posts: 4909
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2618 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
You expect decals to stick once the shell is covered with dirt filled scratches?
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
1. It's not dirty.... IT's on the table.
2. You think my lad cares if there are decals on it ? LOL.
My longer term plan is to get a new body and paint it anyway
-
- Posts: 4909
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2618 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
Cunning plans. Unsurprising cunning plans. Have you got orange paint?
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
My wallet needs a day or 3 off... It's had a tough few days with this and the MTB helmet...
Happily, my boy isn't aware of the upgrades, so we don't need to worry
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
- weeksy
- Site Admin
- Posts: 23433
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13102 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
oh, that escalated....
SOmeone was chatting on PB forum and pointed out one of these little things.
So that's on it's way
SOmeone was chatting on PB forum and pointed out one of these little things.
So that's on it's way
- Taipan
- Posts: 13970
- Joined: Sat Mar 14, 2020 1:48 pm
- Location: Essex Riviera!
- Has thanked: 15982 times
- Been thanked: 10259 times
Re: Tamiya Grasshopper, new RC car day.... Build thread.
get one each and do soem FPV racing! Did Eclipse make it over?