Wow, sounds like a lot!MingtheMerciless wrote: ↑Mon Jul 29, 2024 7:27 pm Epocalypse into LBS for all new frame bearings (approx 14 months old) as I am a bearing destroyer. Also hub bearing checks and a brake bleed whilst it's there.
Shock and Forks off for service but it would appear the knock in my headset is in fact the CSU well and truly on the way out so that'll be a warranty job, last time LBS found this the customer got a whole new fork from SRAM. It's a ZEB and whilst its been worked its not like its lived in the Peaks or Dartmoor all its life so I'm a bit disappointed, though trawling forums some people are on their 3rd or 4th warranty CSU.
What have you done to your bicycle today ?
-
weeksy
- Site Admin
- Posts: 23412
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5449 times
- Been thanked: 13084 times
Re: What have you done to your bicycle today ?
-
MingtheMerciless
- Posts: 3551
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2940 times
- Been thanked: 1882 times
Re: What have you done to your bicycle today ?
I had the frame bearings done at 8 months old after a wet winter and a sodden trip to Dartmoor and they were all good so I pushed it to 14 months this time and see what they say , if all good I''ll push it to 18 months next time. Evil are excellent on warranty issues BUT take a dim view of bearings seizing and spinning up in the frame + shop say as I ride my bike in all weathers I am about their worst/best customer for wrecking things (like an i9 rear hub that appeared to have spent most of its life under water after a Dartmoor trip and a few months of winter).
I also don't have time or patience or workspace/tooling to do this myself.
I also don't have time or patience or workspace/tooling to do this myself.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
MingtheMerciless
- Posts: 3551
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2940 times
- Been thanked: 1882 times
Re: What have you done to your bicycle today ?
New jockey wheels fitted to the Curtis, grease topped up with @millemille special grease. I may have let the old bearings get a bit too far gone as the derailleur cage now has some non standard grooves in it. TIME special 8 pedals stripped and regreased and new out board bearing fitted (IGUS bushing inboard all OK). Pedals refitted to Eewings cranks with plenty of copperslip.
Picked NOBL hub rear wheel from LBS after inspection by shop (not been used for a few years so wanted it checked), also collected Onyx hub rear wheel after that was getting rumbly...again, 3 x new bearings, two in free hub and on hub bearing. Apparently I ride my bikes
.
Fitted old Eagle cassette to NOBL wheel for Dartmoor, had to take it off again to remove spacer as NOBL and Onyx hub drivers are slightly different....d'oh! NOBL hub is better sealed than the Onyx and also NOBL wheel has a Kenda Regolith tyre fitted is better suited to autumnal Dartmoor than the Minion SS on the Onyx. Tyre topped up with sealant jizz.
Cleaned chain, washed it (in sink as Mrs M was out, she'll never know, unlike the time she caught me washing a KR1-s swinger and linkages in the sink......).
Dried chain in conservatory, refitted and Viking lubes ceramic oil used, chain still under 0.75 wear so all good, tweaked AXS rear mech slightly.
Curtis is now ready for Dartmoor.
Picked NOBL hub rear wheel from LBS after inspection by shop (not been used for a few years so wanted it checked), also collected Onyx hub rear wheel after that was getting rumbly...again, 3 x new bearings, two in free hub and on hub bearing. Apparently I ride my bikes
.Fitted old Eagle cassette to NOBL wheel for Dartmoor, had to take it off again to remove spacer as NOBL and Onyx hub drivers are slightly different....d'oh! NOBL hub is better sealed than the Onyx and also NOBL wheel has a Kenda Regolith tyre fitted is better suited to autumnal Dartmoor than the Minion SS on the Onyx. Tyre topped up with sealant jizz.
Cleaned chain, washed it (in sink as Mrs M was out, she'll never know, unlike the time she caught me washing a KR1-s swinger and linkages in the sink......).
Dried chain in conservatory, refitted and Viking lubes ceramic oil used, chain still under 0.75 wear so all good, tweaked AXS rear mech slightly.
Curtis is now ready for Dartmoor.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
MingtheMerciless
- Posts: 3551
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2940 times
- Been thanked: 1882 times
Re: What have you done to your bicycle today ?
Ride to work and then attempted to fit some new Contigatorshield tyres to the road bike as I’ve had a few punctures on the commute recently and they are squaring off. Front went on OK but bastard tight, rear was horrendous and my old Mavic rim that I was hoping would get me through winter went “nope” and folded over….I managed to straighten it but tube had punctured fitting the even more bastard tight tyre. Tried another couple of tubes with the same result so puncture repair day tmrw, new Mavic Krysium wheels ordered, currently on the “ train of shame” home and Mrs M is collecting me from the station. Man card well and truly handed in.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
weeksy
- Site Admin
- Posts: 23412
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5449 times
- Been thanked: 13084 times
-
MingtheMerciless
- Posts: 3551
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2940 times
- Been thanked: 1882 times
Re: What have you done to your bicycle today ?
Managed to get two new Conti Gatorskins onto two new Magic Krysium wheels. Only nipped one tube so that's a success. Washed Madone, then stripped chain and crank off to clean autumn gunk off it. Need to find a better, less sticky/dirt attracty road lube. Took cassette off old wheel, this involved some kinetic bullying as soft Mavic free hub was chewed up and cassette didn't want to leave it. All parts currently drying after degreasing and washing, BB has a BB extraction tool sitting in it after it spent 30 mins at 150C in the oven. Why; to dry the BB bearings out.
Epocalypse seat post collar managed to unscrew itself last night so post mechanicals full of dirt. Post has been stripped and again currently drying, awaiting rebuilding tmrw so long as I can find my "Slick Honey" grease.
Tomorrow, reassemble the above and make up a new motox foam linkage wedge to stop flint disappearing into the Evils frame after Dog 3 shredded the old one when I dropped it.
Epocalypse seat post collar managed to unscrew itself last night so post mechanicals full of dirt. Post has been stripped and again currently drying, awaiting rebuilding tmrw so long as I can find my "Slick Honey" grease.
Tomorrow, reassemble the above and make up a new motox foam linkage wedge to stop flint disappearing into the Evils frame after Dog 3 shredded the old one when I dropped it.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: What have you done to your bicycle today ?
I rode a manual up to Chanctonbury ring and back. Right now, I am suffering.