Less than 2g delivered may be tempted, even though not sure i will ever be able to ride itKungFooBob wrote: ↑Sat Sep 28, 2024 8:51 pmI do have three other bikes.Le_Fromage_Grande wrote: ↑Sat Sep 28, 2024 8:46 pm Pleased you like it, it really doesn't appeal to me, but we're all different.
This one was really bought as a kind of memorial to my old man. I suspect it will replace my B5 Bullet 500 as summer nip to a nice pub for a shandy bike.
Anyone want a 2014 B5 Bullet 500... Hagon shocks, Power Commander, K&N, comically loud exhaust?
Beeza
- ogri
- Posts: 463
- Joined: Mon Mar 16, 2020 4:11 pm
- Location: Wymering
- Has thanked: 1035 times
- Been thanked: 224 times
Re: Beeza
Ignorance is bliss
- mangocrazy
- Posts: 6892
- Joined: Tue Dec 22, 2020 9:58 pm
- Has thanked: 2402 times
- Been thanked: 3625 times
Re: Beeza
I actually quite like the idea of a 'modestly' powered homage to old Brit iron, but with modern reliability, brakes etc. It will sound lovely and will be a brilliant bimbling machine. The only thing that puts me off as I stumble into my dotage is the weight.
200kgs for a single cylinder bike is just bonkers. it should be 20-30kgs lighter.
200kgs for a single cylinder bike is just bonkers. it should be 20-30kgs lighter.
There is no cloud, just somebody else's computer.
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
On the move it's light as a feather.
In fact the steering is so light I thought the head races were loose.
Pushing it around the weight is pretty manageable, but then my main bike is an R1200GS.
The cat, the header tank and the ABS pump all sit below the engine (it's dry sump), so the weight is all low down.
In fact the steering is so light I thought the head races were loose.
Pushing it around the weight is pretty manageable, but then my main bike is an R1200GS.
The cat, the header tank and the ABS pump all sit below the engine (it's dry sump), so the weight is all low down.
- mangocrazy
- Posts: 6892
- Joined: Tue Dec 22, 2020 9:58 pm
- Has thanked: 2402 times
- Been thanked: 3625 times
Re: Beeza
I really do need to get myself down to the gym...
There is no cloud, just somebody else's computer.
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
140 miles on the clock after today's ride.
Decided to rev it a teeny bit more after 70 miles, I'm now occasionally taking it up to 4krpm which is 60mph in top.
I keep going for 6th, it's only got 5 speeds.
Starting to get a feeling for the tyres, almost got rid of the chicken strips.
The suspension is getting better, but it's still crap.
I really like it. It's like my Bullet, but with a bit more go and brakes that work.
Decided to rev it a teeny bit more after 70 miles, I'm now occasionally taking it up to 4krpm which is 60mph in top.
I keep going for 6th, it's only got 5 speeds.
Starting to get a feeling for the tyres, almost got rid of the chicken strips.
The suspension is getting better, but it's still crap.
I really like it. It's like my Bullet, but with a bit more go and brakes that work.
- Attachments
-
- FB_IMG_1728132048795.jpg (94.41 KiB) Viewed 920 times
-
- FB_IMG_1728132055775.jpg (139.36 KiB) Viewed 920 times
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
Papped on the Snake Pass!
- Attachments
-
- 462091234_1098765272258446_640185865349715459_n.jpg (552.24 KiB) Viewed 835 times
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
Anyone else buy a new bike and it come with an under seat first aid kit?
- Attachments
-
- FB_IMG_1728217148627.jpg (146.13 KiB) Viewed 819 times
- Count Steer
- Posts: 11803
- Joined: Mon Jul 19, 2021 4:59 pm
- Has thanked: 6375 times
- Been thanked: 4746 times
Re: Beeza
I was wondering if, like with cars in some European countries, you have to carry one so they'll start putting them on bikes for sale across a broad market? Always carried one on bikes (and in cars and rucsacs ) anyway.KungFooBob wrote: ↑Sun Oct 06, 2024 1:20 pm Anyone else buy a new bike and it come with an under seat first aid kit?
Doubt is not a pleasant condition.
But certainty is an absurd one.
Voltaire
But certainty is an absurd one.
Voltaire
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2084 times
Re: Beeza
My 650 GT didn't, but it's got a decent tool kit unlike the MT.KungFooBob wrote: ↑Sun Oct 06, 2024 1:20 pm Anyone else buy a new bike and it come with an under seat first aid kit?
Yamaha rocket 3
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
The tool kit on the Gold Star is ok, but there's no c-spanner for the shocks... however you can adjust the preload by hand if needed and the bag has a little pocket on the front full of spare fuses.Dodgy69 wrote: ↑Sun Oct 06, 2024 5:44 pmMy 650 GT didn't, but it's got a decent tool kit unlike the MT.KungFooBob wrote: ↑Sun Oct 06, 2024 1:20 pm Anyone else buy a new bike and it come with an under seat first aid kit?
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
Another 60 miles of running in this afternoon. 202 on the clock now, 1/3 of the way to the first service!
Suspension is deffo feeling better (but still a bit crude), I'm not sure if this is because it's all loosening up a bit or I'm just getting used to it.
It cut out a few times today, as you come to a stop pull the clutch in and the engine just stops. The first batch of bikes did this a lot and got a remap at first service to try and fix it, mine should already have the fix. It did only start doing it when the fuel level was low, dunno if it's related. If its still doing it at the first service they can have a stab at fixing it under warranty.
I decided to top the tank off ready for the next ride just before I got home. I removed the fuel cap and it slipped out of my cold fingers, all of about 4 inches on to the tank... leaving three primer deep chips in the paint
I guess I've found another area where they saved a few quid... super thin paint.
Suspension is deffo feeling better (but still a bit crude), I'm not sure if this is because it's all loosening up a bit or I'm just getting used to it.
It cut out a few times today, as you come to a stop pull the clutch in and the engine just stops. The first batch of bikes did this a lot and got a remap at first service to try and fix it, mine should already have the fix. It did only start doing it when the fuel level was low, dunno if it's related. If its still doing it at the first service they can have a stab at fixing it under warranty.
I decided to top the tank off ready for the next ride just before I got home. I removed the fuel cap and it slipped out of my cold fingers, all of about 4 inches on to the tank... leaving three primer deep chips in the paint
I guess I've found another area where they saved a few quid... super thin paint.
- Attachments
-
- 462932782_8339163546119100_1039926104670933475_n.jpg (295.87 KiB) Viewed 619 times
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2084 times
Re: Beeza
That's a bit of a bugger with the tank. I'd ring up about the cutting out, find out if it does solve it. Get it in and done.
Yamaha rocket 3
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
I told myself I wouldn't buy any bolt on tat until after the first service, but I do like to know how long I've been out so I don't annoy the wife and it was only £6 delivered.
- Attachments
-
- FB_IMG_1729243070303.jpg (96.25 KiB) Viewed 519 times
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
I've also got some Highland Green touchup paint from RS Paints (the official BSA supplier), I've just filled the chips in using a cocktail stick (rather than the to large brush in the bottle).
I'll give it another coat then see if I can find my cutting compound to flatten it out before applying the lacquer and then polishing up.
If it looks shit I'll get the tank off when it gets too cold to ride and get it sent to a proper paint shop.
I'll give it another coat then see if I can find my cutting compound to flatten it out before applying the lacquer and then polishing up.
If it looks shit I'll get the tank off when it gets too cold to ride and get it sent to a proper paint shop.
- Skub
- Posts: 12166
- Joined: Mon Mar 16, 2020 5:32 pm
- Location: Norn Iron
- Has thanked: 9819 times
- Been thanked: 10144 times
Re: Beeza
Those little touch up pots from RS are very spendy for what you get. The H1B has a 3 stage paint,so you need 2 pots of paint and one of lacquer. 50 odd quid to you sir...KungFooBob wrote: ↑Fri Oct 18, 2024 10:25 am I've also got some Highland Green touchup paint from RS Paints (the official BSA supplier), I've just filled the chips in using a cocktail stick (rather than the to large brush in the bottle).
I'll give it another coat then see if I can find my cutting compound to flatten it out before applying the lacquer and then polishing up.
If it looks shit I'll get the tank off when it gets too cold to ride and get it sent to a proper paint shop.
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Walt Whitman
https://soundcloud.com/skub1955
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2084 times
Re: Beeza
Careful when washing, might not be waterproof. Mine wasn't and got binned. Got me a temu digital stick on jobby.
Yamaha rocket 3
-
- Posts: 755
- Joined: Mon May 25, 2020 8:35 am
- Location: Malta
- Has thanked: 310 times
- Been thanked: 568 times
Re: Beeza
My Rotax 650 also had 5 gears, and no positive stop at either end. Also a really long travel on the gear pedal, since it was a direct lever without linkage. That wasn't the final nail, but it was one of them.
Glad you're enjoying it
That's mad that the side panels aren't even screwed on.
When are the baffles coming out?
Glad you're enjoying it
That's mad that the side panels aren't even screwed on.
When are the baffles coming out?
- KungFooBob
- Posts: 14196
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
Re: Beeza
After the first service I reckon.
Which is taking some getting too, I need another 400 miles, but the weather has been shocking the last couple of weekends.
Which is taking some getting too, I need another 400 miles, but the weather has been shocking the last couple of weekends.