VFR1200F DCT

Discussions and updates on your new bike, your new build, your wishes, wants and desires
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

VFR1200F DCT

Post by dern »

Picked this up this morning and did roughly 100 miles on it. Took a picture next to the bins to set it off nicely (didn't notice until later)...

vfr-01.jpg
vfr-01.jpg (826.05 KiB) Viewed 909 times
vfr-02.jpg
vfr-02.jpg (782.29 KiB) Viewed 909 times
Bits I have reservations about first...

The rear is a bit bouncy, I'll set the preload and up the compression and see how that is before doing anything more dramatic.

Drive mode (auto) on the gearbox is not great. It tries to change up very early and leaves the engine labouring. I knew it would do this and I'll probably not use it unless I'm on the motorway.

Everything else...

This bike does everything better than the KTM. It's smooth, much easier to ride, feels way faster and the wind protection is superb. The steering is slower so I have to get used to putting more input in to the steering but everything else is so much better than the 1190 I don't mind.

The engine is epic. I've read that it's limited under 4000rpm in 1st and second and generally lacks push below 4000rpm. Yeah, I guess but I just ride it above 4000rpm, just like every other bike I've had, and it pulls really well and sounds good. Overtaking is piss easy, just cheese it and it's gone.

The chassis is very very stable. A bit slow to steer and the rear needs firming up but it feels so so solid.

The brakes will take some time to get used to as they're very good indeed and I need to learn to modulate the braking pressure more.

The wind protection is superb, far better than the KTM. I wish I'd had this on the trip to France. I did an overtake and while on the KTM I'd be hanging on like an Ewok, this was superb. So much so that I didn't notice the speed I'd reached and had to shed speed sharpish.

The gearbox in drive isn't much good as I said above, it changes up to soon. In sport mode it's very good. In manual mode it's absolutely superb. For some reason it seems to be able to anticipate the next gear I want in manual mode with more success than in sport with me choosing a gear now and again. When it's got the next gear that you want ready the changes are seamless and lightening fast. If it's got the wrong gear selected then getting the right one for you is very quick but there's more of a clunk.

Great bike and fits in the garage. It's a lot smaller than I thought. It's like a fat fireblade, in a good way.
User avatar
mangocrazy
Posts: 6892
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2402 times
Been thanked: 3625 times

Re: VFR1200F DCT

Post by mangocrazy »

A mate of mine had one and loved it, but had similar reservations about the suspension. He wound up sticking an Ohlins on the rear and Ohlins internals in the forks. After that he couldn't fault it. My only concern with them is the all up weight. A wet weight of 267 kg (589 lbs) would give me major concern pushing it around on anything other than flat, smooth tarmac.
There is no cloud, just somebody else's computer.
User avatar
weeksy
Site Admin
Posts: 23416
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5450 times
Been thanked: 13085 times

Re: VFR1200F DCT

Post by weeksy »

I didn't know it was auto. Interesting stuff, makes me more intrigued how you get on with it.
User avatar
Dodgy69
Posts: 5455
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1745 times
Been thanked: 2085 times

Re: VFR1200F DCT

Post by Dodgy69 »

Is the 1190 going now.?
Yamaha rocket 3
User avatar
KungFooBob
Posts: 14197
Joined: Sat Mar 14, 2020 1:04 pm
Location: The content of this post is not AI generated.
Has thanked: 539 times
Been thanked: 7526 times

Re: VFR1200F DCT

Post by KungFooBob »

Dodgy69 wrote: Sat May 27, 2023 8:00 pm Is the 1190 going now.?
Goned!
User avatar
Dodgy69
Posts: 5455
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1745 times
Been thanked: 2085 times

Re: VFR1200F DCT

Post by Dodgy69 »

Ah...just read px. 👍
Yamaha rocket 3
User avatar
Cousin Jack
Posts: 4452
Joined: Mon Mar 16, 2020 4:36 pm
Location: Down in the Duchy
Has thanked: 2550 times
Been thanked: 2285 times

Re: VFR1200F DCT

Post by Cousin Jack »

I had an 800, and that was a lardy beast. 267kg would be waaaay too much for me. I never understood the 1200, the 800 motor was a peach, ride it on the torque in 2v mode, or 4v for the hooligan in you. The 1200 was no quicker, just bigger an heavier.

Anyway, enjoy it. It is a Honda, a mile muncher, so munch some miles.
Cornish Tart #1

Remember An Gof!
User avatar
Horse
Posts: 11549
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 6187 times
Been thanked: 5087 times

Re: VFR1200F DCT

Post by Horse »

Cousin Jack wrote: Sat May 27, 2023 8:23 pm I never understood the 1200, the 800 motor was a peach, ride it on the torque in 2v mode, or 4v for the hooligan in you. The 1200 was no quicker, just bigger an heavier.
The 800 (air cooled) or 850 (oil) were nicer to ride than the bigger engines.

But, since they were the same bike just with smaller holes, they were equally lardy :D
Even bland can be a type of character :wave:
User avatar
mangocrazy
Posts: 6892
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2402 times
Been thanked: 3625 times

Re: VFR1200F DCT

Post by mangocrazy »

Horse wrote: Sat May 27, 2023 8:47 pm
Cousin Jack wrote: Sat May 27, 2023 8:23 pm I never understood the 1200, the 800 motor was a peach, ride it on the torque in 2v mode, or 4v for the hooligan in you. The 1200 was no quicker, just bigger an heavier.
The 800 (air cooled) or 850 (oil) were nicer to ride than the bigger engines.

But, since they were the same bike just with smaller holes, they were equally lardy :D
Are you talking about the same engines/bikes? VFRs were always water-cooled and the only engine sizes were 750, 800 or 1200...?
There is no cloud, just somebody else's computer.
User avatar
KungFooBob
Posts: 14197
Joined: Sat Mar 14, 2020 1:04 pm
Location: The content of this post is not AI generated.
Has thanked: 539 times
Been thanked: 7526 times

Re: VFR1200F DCT

Post by KungFooBob »

mangocrazy wrote: Sat May 27, 2023 9:15 pm
Horse wrote: Sat May 27, 2023 8:47 pm
Cousin Jack wrote: Sat May 27, 2023 8:23 pm I never understood the 1200, the 800 motor was a peach, ride it on the torque in 2v mode, or 4v for the hooligan in you. The 1200 was no quicker, just bigger an heavier.
The 800 (air cooled) or 850 (oil) were nicer to ride than the bigger engines.

But, since they were the same bike just with smaller holes, they were equally lardy :D
Are you talking about the same engines/bikes? VFRs were always water-cooled and the only engine sizes were 750, 800 or 1200...?
Cousin Jack fought in WW1 so we let him off these faux pas.
User avatar
mangocrazy
Posts: 6892
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2402 times
Been thanked: 3625 times

Re: VFR1200F DCT

Post by mangocrazy »

KungFooBob wrote: Sat May 27, 2023 9:16 pm
mangocrazy wrote: Sat May 27, 2023 9:15 pm
Horse wrote: Sat May 27, 2023 8:47 pm

The 800 (air cooled) or 850 (oil) were nicer to ride than the bigger engines.

But, since they were the same bike just with smaller holes, they were equally lardy :D
Are you talking about the same engines/bikes? VFRs were always water-cooled and the only engine sizes were 750, 800 or 1200...?
Cousin Jack fought in WW1 so we let him off these faux pas.
Except that Cousin Jack knows his VFR onions, but Horse apparently doesn't...
There is no cloud, just somebody else's computer.
User avatar
Horse
Posts: 11549
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 6187 times
Been thanked: 5087 times

Re: VFR1200F DCT

Post by Horse »

mangocrazy wrote: Sat May 27, 2023 9:15 pm
Horse wrote: Sat May 27, 2023 8:47 pm
Cousin Jack wrote: Sat May 27, 2023 8:23 pm I never understood the 1200, the 800 motor was a peach, ride it on the torque in 2v mode, or 4v for the hooligan in you. The 1200 was no quicker, just bigger an heavier.
The 800 (air cooled) or 850 (oil) were nicer to ride than the bigger engines.

But, since they were the same bike just with smaller holes, they were equally lardy :D
Are you talking about the same engines/bikes? VFRs were always water-cooled and the only engine sizes were 750, 800 or 1200...?
Sorry, missed the important, nay essential, qualifier of 'BMW twins'.
Even bland can be a type of character :wave:
User avatar
Horse
Posts: 11549
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 6187 times
Been thanked: 5087 times

Re: VFR1200F DCT

Post by Horse »

mangocrazy wrote: Sat May 27, 2023 9:22 pm
KungFooBob wrote: Sat May 27, 2023 9:16 pm
mangocrazy wrote: Sat May 27, 2023 9:15 pm

Are you talking about the same engines/bikes? VFRs were always water-cooled and the only engine sizes were 750, 800 or 1200...?
Cousin Jack fought in WW1 so we let him off these faux pas.
Except that Cousin Jack knows his VFR onions, but Horse apparently doesn't...
He knows a bit about them. But doesn't often post about them :)
Even bland can be a type of character :wave:
User avatar
Skub
Posts: 12167
Joined: Mon Mar 16, 2020 5:32 pm
Location: Norn Iron
Has thanked: 9819 times
Been thanked: 10144 times

Re: VFR1200F DCT

Post by Skub »

Horse wrote: Sat May 27, 2023 9:22 pm
mangocrazy wrote: Sat May 27, 2023 9:15 pm
Horse wrote: Sat May 27, 2023 8:47 pm

The 800 (air cooled) or 850 (oil) were nicer to ride than the bigger engines.

But, since they were the same bike just with smaller holes, they were equally lardy :D
Are you talking about the same engines/bikes? VFRs were always water-cooled and the only engine sizes were 750, 800 or 1200...?
Sorry, missed the important, nay essential, qualifier of 'BMW twins'.
Honda made a BMW? :shock:
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: VFR1200F DCT

Post by dern »

Horse wrote: Sat May 27, 2023 9:22 pm Sorry, missed the important, nay essential, qualifier of 'BMW twins'.
The one I had was garbage and I wouldn’t touch another bmw twin if you paid me
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: VFR1200F DCT

Post by dern »

Cousin Jack wrote: Sat May 27, 2023 8:23 pm I had an 800, and that was a lardy beast. 267kg would be waaaay too much for me. I never understood the 1200, the 800 motor was a peach, ride it on the torque in 2v mode, or 4v for the hooligan in you. The 1200 was no quicker, just bigger an heavier.

Anyway, enjoy it. It is a Honda, a mile muncher, so munch some miles.
The 800 made 105bhp, this makes at least 160bhp. This feels significantly faster than my 636 and that has more power than the 800 and was a lot lighter.

I sat on an 800 and it was ok but felt pretty small.
User avatar
Horse
Posts: 11549
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 6187 times
Been thanked: 5087 times

Re: VFR1200F DCT

Post by Horse »

Skub wrote: Sat May 27, 2023 9:24 pm
Horse wrote: Sat May 27, 2023 9:22 pm
mangocrazy wrote: Sat May 27, 2023 9:15 pm

Are you talking about the same engines/bikes? VFRs were always water-cooled and the only engine sizes were 750, 800 or 1200...?
Sorry, missed the important, nay essential, qualifier of 'BMW twins'.
Honda made a BMW? :shock:
Filly doesn't know much about bikes, but called Pans "Honda's BMW" :D
Even bland can be a type of character :wave:
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: VFR1200F DCT

Post by dern »

weeksy wrote: Sat May 27, 2023 7:47 pm I didn't know it was auto. Interesting stuff, makes me more intrigued how you get on with it.
To be honest that swung it for me. I was extremely curious to see what it would be like. So far I love it but it’s at its best when it’s in manual. In manual mode though, apart from pulling away, it acts like a very good quick shifter. It’s even got the optional foot shifter fitted.
User avatar
Dodgy69
Posts: 5455
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1745 times
Been thanked: 2085 times

Re: VFR1200F DCT

Post by Dodgy69 »

Can you still slip the clutch when in auto. ?
Yamaha rocket 3
User avatar
Count Steer
Posts: 11805
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6376 times
Been thanked: 4751 times

Re: VFR1200F DCT

Post by Count Steer »

Re the soft rear end, it seems to be a thing with tourer set up that the default is 'comfort' ie soggy. Has it got EAS? Either way changing the rear shock parameters should sort it.

(Just nosing about on the Internet for info on the WP made unit on my old bike, wondering if they're an alternative to Ohlins if you wanted to change it, and found that they're now wholly owned by KTM. Didn't know that).
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire