What have you done today thread?

General chat topics, anything and everything you want or need to discuss
Demannu
Posts: 1882
Joined: Sat May 08, 2021 5:14 pm
Location: Another day without using algebra
Has thanked: 66 times
Been thanked: 1235 times

Re: What have you done today thread?

Post by Demannu »

Yorick wrote: Thu Feb 09, 2023 4:17 pm
Demannu wrote: Thu Feb 09, 2023 2:34 pm Propped the moho stairgate at the top of the stairs, first topcoat done!
No hair :bblonde:
Google didn't help me :(
Painting the hallway, yesterday dog got down and decided to stipple the wall, so used a stairgate to prevent a reoccurrence..
User avatar
Yambo
Posts: 2448
Joined: Mon Mar 16, 2020 8:08 pm
Location: Self Isolating
Has thanked: 614 times
Been thanked: 1632 times

Re: What have you done today thread?

Post by Yambo »

Slenver wrote: Thu Feb 09, 2023 2:26 pm
I left a few weeks ago, gone to Mastodon. Having the whole thing being run by a petulant child wasn't working out for me.
This need to have a presence on social media, is it catching?
User avatar
Pirahna
Posts: 1862
Joined: Wed Mar 25, 2020 7:31 pm
Has thanked: 1773 times
Been thanked: 1107 times

Re: What have you done today thread?

Post by Pirahna »

Yambo wrote: Thu Feb 09, 2023 5:23 pm
This need to have a presence on social media, is it catching?
Posting on here counts as your social media presence.
User avatar
Yambo
Posts: 2448
Joined: Mon Mar 16, 2020 8:08 pm
Location: Self Isolating
Has thanked: 614 times
Been thanked: 1632 times

Re: What have you done today thread?

Post by Yambo »

Pirahna wrote: Thu Feb 09, 2023 5:49 pm
Yambo wrote: Thu Feb 09, 2023 5:23 pm
This need to have a presence on social media, is it catching?
Posting on here counts as your social media presence.
Does it?

Is it catching?
User avatar
Slenver
Posts: 1586
Joined: Mon Mar 16, 2020 7:38 pm
Has thanked: 662 times
Been thanked: 865 times

Re: What have you done today thread?

Post by Slenver »

Yambo wrote: Thu Feb 09, 2023 5:23 pm This need to have a presence on social media, is it catching?
1,524 posts says 'yes, maybe' :)
User avatar
ZRX61
Posts: 4848
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 1446 times
Been thanked: 1330 times

Re: What have you done today thread?

Post by ZRX61 »

Did a bit more half-arsed faffery on the ST & got the part of the fender flair that holds the sensor doodad attached so it doesn't wave around like a whores drawers.
While I was at it I loosened the fender liner somewhat to get a look behind the bumper cover. No surprises there, altho there was a small piece of the bumper cover that had snapped off laying in the bottom.
User avatar
Noggin
Posts: 7679
Joined: Thu Mar 19, 2020 1:46 pm
Location: Ski Resort
Has thanked: 16254 times
Been thanked: 3745 times

Re: What have you done today thread?

Post by Noggin »

Borrowed a vehicle from work cos I had an appointment with the knee surgeon in Grenoble. Got there far too early but went in anyway and he was available, so I got to see him an hour early :lol:

Upshot is -

26th May - Surgery to take out the metal on my knee/tibia (later than I'd wanted, but I'm now hoping my boss will keep me on for the extra couple of weeks, then I'll have worked for a full 6 months - good for unemployment benefit!! LOL)

2 May - go see the anaesthetist to discuss whether I can have a general anaesthetic and no a local!!

15 days after the op to wait in resort until the nurse takes the stitches out, then I can go to the uk for a visit for a couple of weeks :D


Interestingly, the op is described as 'ambulatoire' - go in in the morning, have the op and go home that afternoon/evening. I told him that I'd like to stay one night minimum for two reasons,
1 - I want a GA, so think it's sensible
2 - there's no one in resort in May, so I don't think it's a good idea!!

He said that legally, if I live alone, then he can't send me home the first night! Perfect!!!

The other issue for me is that I can't use crutches. I can use a stick/crutch on the left side (wrong side for the bad leg, but only side I can use it!) so if for any reason I need crutches, I can't come home because that means I need a wheelchair - building is on a slope and has stairs!! :lol: :lol: :lol: He says I won't need crutches, but also has given me a prescription for a set :? So, better to stay until I'm sure I'm (relatively) safe to come home :D :D


I then stopped at the local Yamaha dealer on the way home and got all excited because there was a bike outside that had the same colour wheels as the MT10's I've seen online. Sadly it wasn't a 10 :( :( He doesn't have a ten :( :( But he did call a dealer in Chambery and they do have one!! Now to get a lift to Chambery in the next couple of weeks to go have a go on it to see if I can reach the bars :D :D
Life is for living. Buy the shoes. Eat the cake. Ride the bikes. Just, ride the bikes!! :bblonde:
User avatar
ZRX61
Posts: 4848
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 1446 times
Been thanked: 1330 times

Re: What have you done today thread?

Post by ZRX61 »

I witnessed some absolute genius yesterday...
Guy is trying to remove a shower valve by tightening it with ChannelLocks. :eh:
His *helper* (who was more of a supervisor) tells him "Turn it the other way"
.. So the guy changes the grip he has on the valve from the jaws facing left, to the jaws facing right... & then carries on trying to tighten it... :wtf:
I had to walk away :roll:
David
Posts: 2088
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 216 times
Been thanked: 666 times

Re: What have you done today thread?

Post by David »

Where do I begin......
After the trip to Wales the other day, the V50 was making noises, eventually I worked out the o/s/f pads were down to the metal........(I was only a muck nacknic for 30 years...).
So, this morning I fetch pads (two sets...just in case as there is some doubt about the fitting....we all know it will be the expensive set)SHMBO'd mentions that we are going to Exeter (60 miles +) to collect a bidet....{pads were down to the metal.......(!). Collected, expensive snack acquired at garden centre.....get home, remove vanity/sink that will get collected at 5.30, then decide I will start on the pads.

Jack the car up with my admittedly old jack, loosen wheel....watch as car gracefully falls off jack, which, i toppling, manages to puncture the sump.


Oh, Flupp.
The car is '05, 200,000 miles (not alot for one of these) and due a mot next month.
It looks solid underneath, but....

So:- the options are:-
a. Kill myself.
b. Fill hole with plastic metal or chewing gum.
c. Go to pub.
d. Buy another X Type.
e. Change sump.


I will not be offended if you take the piss. I feel it might help.
User avatar
Count Steer
Posts: 11414
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6263 times
Been thanked: 4613 times

Re: What have you done today thread?

Post by Count Steer »

f) Buy a new jack.
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire
David
Posts: 2088
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 216 times
Been thanked: 666 times

Re: What have you done today thread?

Post by David »

No need, I have 4 others.....
Mr. Dazzle
Posts: 13481
Joined: Mon Mar 16, 2020 7:57 pm
Location: Milton Keynes
Has thanked: 2609 times
Been thanked: 6012 times

Re: What have you done today thread?

Post by Mr. Dazzle »

Buy some axle stands to go with em then.
User avatar
Count Steer
Posts: 11414
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6263 times
Been thanked: 4613 times

Re: What have you done today thread?

Post by Count Steer »

David wrote: Fri Feb 10, 2023 7:14 pm No need, I have 4 others.....
c) then. :thumbup:
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire
David
Posts: 2088
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 216 times
Been thanked: 666 times

Re: What have you done today thread?

Post by David »

Mr. Dazzle wrote: Fri Feb 10, 2023 7:16 pm Buy some axle stands to go with em then.
Got those too....didn't get high enough.
David
Posts: 2088
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 216 times
Been thanked: 666 times

Re: What have you done today thread?

Post by David »

Count Steer wrote: Fri Feb 10, 2023 7:20 pm
David wrote: Fri Feb 10, 2023 7:14 pm No need, I have 4 others.....
c) then. :thumbup:
Too late...drinking the last three litres of ginger beer from the garage and SHMBO'd is in bed...
I probably couldnt find the pub now....
User avatar
KungFooBob
Posts: 13689
Joined: Sat Mar 14, 2020 1:04 pm
Location: The content of this post is not AI generated.
Has thanked: 532 times
Been thanked: 7217 times

Re: What have you done today thread?

Post by KungFooBob »

I created some pretty cool Universal Functions in B1UP, including a Line Loop without the need for paid support. What a flippin' bad ass!
User avatar
Count Steer
Posts: 11414
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6263 times
Been thanked: 4613 times

Re: What have you done today thread?

Post by Count Steer »

David wrote: Fri Feb 10, 2023 7:25 pm
Count Steer wrote: Fri Feb 10, 2023 7:20 pm
David wrote: Fri Feb 10, 2023 7:14 pm No need, I have 4 others.....
c) then. :thumbup:
Too late...drinking the last three litres of ginger beer from the garage and SHMBO'd is in bed...
I probably couldnt find the pub now....
I feel we're homing in on a choice but a) is definitely out. :thumbup:
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire
David
Posts: 2088
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 216 times
Been thanked: 666 times

Re: What have you done today thread?

Post by David »

Worry not, I would probably fuk up choice a. ....
this same jack bit me once before (long time ago).....I was a mobile mechanic and had a quick job on a mk. 1 escort, adjust rear brakes.
Slopey drive, so I chocked the front, hand brake off, whizzed off the back wheels with the jack under the diff...start shaking the drum off, at which point the car falls off the jack (I know, axle stands ,) . I was shaking the drum at 12 and six o'clock.

The jack rolls out of reach, no-one in ear shot.

After a couple of minutes I decided pulling my hand out from under the lip of the drum is the best option, so gritting of teeth and some lost skin and we are off.
After replacing the jack and doing the first side the lady of the house came out with a cup of tea, and almost fainted when she noticed my hand and the blud.....




That jack is now sitting at the front of the garage ready for the next trip to the scrappy, unless I can sell it to Yorick.....
Last edited by David on Fri Feb 10, 2023 7:52 pm, edited 1 time in total.
User avatar
Yorick
Posts: 16278
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 10113 times
Been thanked: 6649 times

Re: What have you done today thread?

Post by Yorick »

David wrote: Fri Feb 10, 2023 7:38 pm Worry not, I would probably fuk up choice a. ....
this same jack bit me once before (long time ago).....I was a mobile mechanic and had a quick job on a mkI. i escort, adjust rear brakes.
Slopy drive, so I chocked the front, hand brake off, whizzed off the back wheels with the jack under the diff...start shaking the drum off, at which point the car falls off the jack (I know, axle stands ,) . I was shaking the drum at 12 and six o'clock.

The jack rolls out of reach, no-one in ear shot.

After a couple of minutes I decided pulling my hand out from under the lip of the drum is the best option, so ritting of teeth and some lost skin and we are off.
After replacing the jack and doing the first side the lady of the house came out with a cup of tea, and almost fainted when she noticed my hand and the blud.....




That jack is now sitting at the front of the garage ready for the next trip to the scrappy, unless I can sell it to Yorick.....
:obscene-birdiedoublered: :obscene-birdiedoublered:
David
Posts: 2088
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 216 times
Been thanked: 666 times

Re: What have you done today thread?

Post by David »

I am trying....how about £10 and postage?