Yamaha MT09SP

Discussions and updates on your new bike, your new build, your wishes, wants and desires
tricol
Posts: 676
Joined: Fri Mar 12, 2021 1:52 pm
Has thanked: 235 times
Been thanked: 471 times

Yamaha MT09SP

Post by tricol »

Well, it's finally here. Paid up on Tuesday last week and asked to be contacted about getting it delivered. Heard nothing all week and called on Saturday to be told it would be with me within a couple of hours. Rolled off the van into the garage. I'd bought some Evotech bobbins and a radiator guard. So, fitted the bobbins no problem. Couldn't fit the rad guard as Yamaha have two sets of plastic rivets holding on the rad covers. Gave up in the end. Anyway, was giving it the once over and thought the optional flyscreen I'd bought looked a bit wrong, and very tight to the dash. Turns out they've forgot to put some tall washers in that lift it away from the dash. So, another phonecall in the morning to them. I'm bracing myself for the excuse of either why it happened or why they don't have the bits to sort it.

Anyway, here is a rear quarter shot. I've left out the headlight, don't want to offend too many here.

Didn't get out on it. The roads are still damp and covered in shit, and our estate is a mudbath from all the contruction work, so who knows when I'll get out on it.

It feels like much more bike than the Trident, and a bit special with the SP bits on it.

ImageIMG_9371edit by Colin, on Flickr
Yamaha MT09 SP
User avatar
ChrisW
Posts: 2724
Joined: Thu Feb 10, 2022 8:46 pm
Has thanked: 2915 times
Been thanked: 2060 times

Re: Yamaha MT09SP

Post by ChrisW »

Congratulations :thumbup:
User avatar
Noggin
Posts: 8031
Joined: Thu Mar 19, 2020 1:46 pm
Location: Ski Resort
Has thanked: 16228 times
Been thanked: 3928 times

Re: Yamaha MT09SP

Post by Noggin »

Awesome!!!
Life is for living. Buy the shoes. Eat the cake. Ride the bikes. Just, ride the bikes!! :bblonde:
Le_Fromage_Grande
Posts: 11234
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 607 times
Been thanked: 4124 times

Re: Yamaha MT09SP

Post by Le_Fromage_Grande »

Nice one, post a picture of the plastic rivets, I suspect they're the ones were you push the middle down to remove them
Honda Owner
User avatar
weeksy
Site Admin
Posts: 23430
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5452 times
Been thanked: 13097 times

Re: Yamaha MT09SP

Post by weeksy »

Nah, they're a screw out kind, but you kinda need to hold the outer.
tricol
Posts: 676
Joined: Fri Mar 12, 2021 1:52 pm
Has thanked: 235 times
Been thanked: 471 times

Re: Yamaha MT09SP

Post by tricol »

weeksy wrote: Sun Jan 29, 2023 7:37 pm you kinda need to hold the outer.
Tried that, they just spin, even with the lightest of pressure. I'll try again another day.
Yamaha MT09 SP
User avatar
Skub
Posts: 12172
Joined: Mon Mar 16, 2020 5:32 pm
Location: Norn Iron
Has thanked: 9835 times
Been thanked: 10148 times

Re: Yamaha MT09SP

Post by Skub »

Health to use and roll on the salt free roads. 8-)
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
User avatar
mangocrazy
Posts: 6920
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2407 times
Been thanked: 3635 times

Re: Yamaha MT09SP

Post by mangocrazy »

Lovely. Very interested to hear your riding impressions.

When the salt has all gone, obvs...
There is no cloud, just somebody else's computer.
User avatar
Dodgy69
Posts: 5459
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1750 times
Been thanked: 2085 times

Re: Yamaha MT09SP

Post by Dodgy69 »

Bike looks great. ..Go gentle when cleaning front indicators, they can pop out. Wouldn't the shop fit the extras foc, fitting.
Yamaha rocket 3
tricol
Posts: 676
Joined: Fri Mar 12, 2021 1:52 pm
Has thanked: 235 times
Been thanked: 471 times

Re: Yamaha MT09SP

Post by tricol »

They fitted the fly screen FOC. Incorrectly.

I bought my own rad guard as it was half the price of the genuine Yamaha rad guard.I’m in foul form over it now. The screws simply aren’t coming out. The only way is by drilling them out and I’m not doing that. I’ll just sell it and forget about a rad guard.
Yamaha MT09 SP
User avatar
Dodgy69
Posts: 5459
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1750 times
Been thanked: 2085 times

Re: Yamaha MT09SP

Post by Dodgy69 »

I have the evotech RG. Tbh I've never had a proper look at its fitting. I'll look later.
Yamaha rocket 3
User avatar
Dodgy69
Posts: 5459
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1750 times
Been thanked: 2085 times

Re: Yamaha MT09SP

Post by Dodgy69 »

Yamaha rocket 3
tricol
Posts: 676
Joined: Fri Mar 12, 2021 1:52 pm
Has thanked: 235 times
Been thanked: 471 times

Re: Yamaha MT09SP

Post by tricol »

Yip, watched every video including that one. Read every forum with tips and tricks of how to remove them. They’re not coming out.
Yamaha MT09 SP
User avatar
Ditchfinder
Posts: 1124
Joined: Thu Dec 24, 2020 8:55 am
Has thanked: 622 times
Been thanked: 692 times

Re: Yamaha MT09SP

Post by Ditchfinder »

Happy NBD 👍
'07 Griso 1100 (for sale), '94 Sprint 900, the scabbiest Himalayan in the country
User avatar
weeksy
Site Admin
Posts: 23430
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5452 times
Been thanked: 13097 times

Re: Yamaha MT09SP

Post by weeksy »

tricol wrote: Mon Jan 30, 2023 8:05 am Yip, watched every video including that one. Read every forum with tips and tricks of how to remove them. They’re not coming out.
take to dealer... that's why you have warranty..

can you not access from other side ? At the end of the day it's a clip... sacrifice and fit nicer ones. But do not drill !
tricol
Posts: 676
Joined: Fri Mar 12, 2021 1:52 pm
Has thanked: 235 times
Been thanked: 471 times

Re: Yamaha MT09SP

Post by tricol »

weeksy wrote: Mon Jan 30, 2023 8:19 am can you not access from other side
No, the back of the screw is hidden well within the rad shroud.
Yamaha MT09 SP
User avatar
Dodgy69
Posts: 5459
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1750 times
Been thanked: 2085 times

Re: Yamaha MT09SP

Post by Dodgy69 »

Is the whole thing turning or won't it budge.?
Yamaha rocket 3
User avatar
weeksy
Site Admin
Posts: 23430
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5452 times
Been thanked: 13097 times

Re: Yamaha MT09SP

Post by weeksy »

Dodgy69 wrote: Mon Jan 30, 2023 10:13 am Is the whole thing turning or won't it budge.?
had it before, i think they have the crappiest thread ever... so it all just spins.

Basically, something very sharp/soft underneath the panel and offending item, should get it.

Usually a fingernail.... just gives it a tiny bit of tension it needs.
User avatar
ChrisW
Posts: 2724
Joined: Thu Feb 10, 2022 8:46 pm
Has thanked: 2915 times
Been thanked: 2060 times

Re: Yamaha MT09SP

Post by ChrisW »

This any help at all?



I've seen similar on cars before & the centre pin pulls rather screws out.
tricol
Posts: 676
Joined: Fri Mar 12, 2021 1:52 pm
Has thanked: 235 times
Been thanked: 471 times

Re: Yamaha MT09SP

Post by tricol »

It's only the screw centre that is turning, which is what it should be. The outer stays still. But, the thread isn't catching. I don't know if it's threaded because of what I've done (which is just turn the bastard). The opposite side was fine, turned them slowly and out they came.
I've seen similar on cars before & the centre pin pulls rather screws out.
Most car ones are pop type, so you can push the centre to release it. These are small screw heads. Yes, watched that video and every other one. Still doesn't help. Thanks though :thumbup:
Yamaha MT09 SP