I purchased two rear discs for a 90's Vauxhall Carlton for £15 and set about with my grinder to cut the discs off.
A little cleaning up on my lathe and they fit perfect, even have the same bolt hole pattern, result.
New bike [project]
Re: New bike [project]
Bit of a problem with the drum brakes as the drums are knackered. They are made of some sort of cheap iron casting with a thin liner which has worn through and blistered. So, after much searching on the internet, I discovered that some cars have the same size rear brake shoe [160mm] inside the rear disc set up for the hand brake.
I purchased two rear discs for a 90's Vauxhall Carlton for £15 and set about with my grinder to cut the discs off.
A little cleaning up on my lathe and they fit perfect, even have the same bolt hole pattern, result.
I purchased two rear discs for a 90's Vauxhall Carlton for £15 and set about with my grinder to cut the discs off.
A little cleaning up on my lathe and they fit perfect, even have the same bolt hole pattern, result.
-
Skub
- Posts: 12167
- Joined: Mon Mar 16, 2020 5:32 pm
- Location: Norn Iron
- Has thanked: 9819 times
- Been thanked: 10144 times
Re: New bike [project]
Ingenious!
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Walt Whitman
https://soundcloud.com/skub1955
-
Skub
- Posts: 12167
- Joined: Mon Mar 16, 2020 5:32 pm
- Location: Norn Iron
- Has thanked: 9819 times
- Been thanked: 10144 times
Re: New bike [project]
It's like a bike designed by the protomolecule.
Super cool work.
Super cool work.
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Walt Whitman
https://soundcloud.com/skub1955
-
Ditchfinder
- Posts: 1123
- Joined: Thu Dec 24, 2020 8:55 am
- Has thanked: 620 times
- Been thanked: 692 times
Re: New bike [project]
First set of bar end mirrors / indicators that look right I've seen
'07 Griso 1100 (for sale), '94 Sprint 900, the scabbiest Himalayan in the country
Re: New bike [project]
Managed to paint the panels which allowed me to complete the build .A few snags to sort out the worst being the carburation
as it runs ok but won't tick over. Tried a new carb but runs worse so need to play with the jetting.
as it runs ok but won't tick over. Tried a new carb but runs worse so need to play with the jetting.
-
Count Steer
- Posts: 11804
- Joined: Mon Jul 19, 2021 4:59 pm
- Has thanked: 6375 times
- Been thanked: 4749 times
Re: New bike [project]
Looks like it just came off the production line! 
Is the carb anything exotic or are they (and the internals) easy to get hold of? Odd that both carbs were
.
Is the carb anything exotic or are they (and the internals) easy to get hold of? Odd that both carbs were
.Doubt is not a pleasant condition.
But certainty is an absurd one.
Voltaire
But certainty is an absurd one.
Voltaire
Re: New bike [project]
Its an MZ 150 engine with the MZ BVF carburettor. They are a bit crude but you can get spares.Count Steer wrote: ↑Wed Feb 15, 2023 2:30 pm Looks like it just came off the production line!
Is the carb anything exotic or are they (and the internals) easy to get hold of? Odd that both carbs were
I bought a brand new BVF copy of the Bay for £35 which looks ok but is not performing.
A Makuni conversion may be needed.
-
Bigyin
- Posts: 3179
- Joined: Sun Mar 15, 2020 7:39 pm
- Has thanked: 1412 times
- Been thanked: 2680 times
Re: New bike [project]
Sums it up very well. I couldnt have put it better as thats a cracking job all the way through @kendo57