Need Help...

Anything you like about motorbikes
Annieclover2
Posts: 3
Joined: Fri Apr 01, 2022 6:46 am
Has thanked: 3 times
Been thanked: 1 time

Need Help...

Post by Annieclover2 »

Hey everyone,
My motorcycle 2017 rusi gala has no power i have checked the battery its ok and changed the main fuse but still no power. My question is what should i check next? Maybe i am overlooking something but any thoughts from you all would be appreciated.
David
Posts: 2134
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 218 times
Been thanked: 689 times

Re: Need Help...

Post by David »

Check the terminals on the battery and the fuse carrier. And check that the battery has power.
User avatar
Count Steer
Posts: 11873
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6399 times
Been thanked: 4790 times

Re: Need Help...

Post by Count Steer »

So, press the starter and nothing at all happens? No clicks or anything? Was the fuse you replaced actually OK? How did you check the battery?

Do the lights come on (if they'll actually run off the battery)? As you say no power, I assume not. So it seems pretty fundamental...as David suggested check connections inc to the ignition if they're accessible.
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire
User avatar
KungFooBob
Posts: 14273
Joined: Sat Mar 14, 2020 1:04 pm
Location: The content of this post is not AI generated.
Has thanked: 541 times
Been thanked: 7569 times

Re: Need Help...

Post by KungFooBob »

For £500 plus expenses....
User avatar
MrLongbeard
Posts: 4622
Joined: Sun Mar 15, 2020 2:06 pm
Has thanked: 602 times
Been thanked: 2465 times

Re: Need Help...

Post by MrLongbeard »

Switch the kill switch, and check the power band hasn't faded
User avatar
Bigyin
Posts: 3182
Joined: Sun Mar 15, 2020 7:39 pm
Has thanked: 1414 times
Been thanked: 2684 times

Re: Need Help...

Post by Bigyin »

First step is check the kill switch ;)
User avatar
Count Steer
Posts: 11873
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6399 times
Been thanked: 4790 times

Re: Need Help...

Post by Count Steer »

Bigyin wrote: Mon Apr 18, 2022 7:36 pm First step is check the kill switch ;)
Took me 3 days (and an electrician neighbour) to solve that one after my bike had been garaged for a while. :( Switch was in the correct position and the engine would spin. Quick waggle cleaned the contacts and started first time. :shifty:
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire
Annieclover2
Posts: 3
Joined: Fri Apr 01, 2022 6:46 am
Has thanked: 3 times
Been thanked: 1 time

Re: Need Help...

Post by Annieclover2 »

Thanks everyone for suggested me.