INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Discussions and updates on your new bike, your new build, your wishes, wants and desires
User avatar
Taipan
Posts: 13948
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15957 times
Been thanked: 10248 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Taipan »

weeksy wrote: Thu Jan 20, 2022 7:57 am
Taipan wrote: Thu Jan 20, 2022 7:48 am
MrLongbeard wrote: Wed Jan 19, 2022 11:21 pm

Them's the rules, the rear wheel can't be the most rearward bit of a bike
Aye, don't stop them looking crap though...
We're going to have to disagree... Mine will be standard by the end of the month. It's in for 1st service a week on Fri and i'll collect the bits to put back to stock then.
Didnt you switch back and forth with the 690 tail tidy? Maybe you'll face the same indecision with this one? Are there any less cut tail tidies out there?
User avatar
weeksy
Site Admin
Posts: 23422
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by weeksy »

Taipan wrote: Thu Jan 20, 2022 8:14 am
weeksy wrote: Thu Jan 20, 2022 7:57 am
Taipan wrote: Thu Jan 20, 2022 7:48 am

Aye, don't stop them looking crap though...
We're going to have to disagree... Mine will be standard by the end of the month. It's in for 1st service a week on Fri and i'll collect the bits to put back to stock then.
Didnt you switch back and forth with the 690 tail tidy? Maybe you'll face the same indecision with this one? Are there any less cut tail tidies out there?
NAh, the 690s all ran short Evotech tidies.... Part of the reason was/is the ability to put it in the garage neater. With the layout of the garage the tidy just gives that bit more clearance between the MT07 and the ZX6. I did try a few on the XSR900.

But for me, looking at it, that just looks too squat and wrong with the tidy on there. I think standard tidy with a black plate and we'll be happy.
User avatar
Dodgy69
Posts: 5457
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1747 times
Been thanked: 2085 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Dodgy69 »

Other options are available. 😊
Yamaha rocket 3
Couchy
Posts: 2388
Joined: Sat Mar 14, 2020 2:56 pm
Has thanked: 326 times
Been thanked: 2173 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Couchy »

Ideally it needs something half way between the two
User avatar
weeksy
Site Admin
Posts: 23422
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by weeksy »

Interestingly, over on pb forum they were 10-0 in favour of the tail tidy.
User avatar
KungFooBob
Posts: 14204
Joined: Sat Mar 14, 2020 1:04 pm
Location: The content of this post is not AI generated.
Has thanked: 539 times
Been thanked: 7530 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by KungFooBob »

weeksy wrote: Fri Jan 21, 2022 5:54 pm Interestingly, over on the vastly inferior pb forum they were 10-0 in favour of the tail tidy.
EFA
User avatar
weeksy
Site Admin
Posts: 23422
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by weeksy »

EFA
Also found in: Dictionary, Thesaurus, Medical, Encyclopedia, Wikipedia.
Category filter:
Show All (62)
Acronym Definition
EFA Essential Fatty Acid
EFA Education for All
EFA École des Forces Armées (French: School of the Armed Forces; Ivory Coast)
EFA Elektronische Fahrplanauskunft (German)
EFA École Française d'Audiovisuel (French: French School of Broadcasting)
EFA Evidence for Action (various locations)
EFA Emergency First Aid (health care; various locations)
EFA Education Funding Agency (UK)
EFA Equestrian Federation of Australia
EFA Elizabeth Foundation for the Arts (New York, NY)
EFA Ecological Focus Area (EU regulations)
EFA European Free Alliance
EFA Etsy for Animals
EFA Enfance & Familles d'Adoption (France)
EFA European Film Awards
EFA Elmira Free Academy (Elmira, NY)
EFA Exploratory Factor Analysis
EFA Engin de Franchissement de l'Avant (French: Forward Crossing Apparatus)
EFA Empowerment for All
EFA Electronic Frontiers Australia Inc.
EFA Epilepsy Foundation of America
EFA Ecological Footprint Analysis (natural resource measurement)
EFA Editorial Freelancers Association
EFA Economics, Finance, Accounting (course; various schools)
EFA European Fighter Aircraft
EFA Essex Fire Authority (UK)
EFA European Finance Association
EFA École Française d'Aviron (French: French Rowing School)
EFA École Française d'Athènes (French: French School of Athens; Athens, Greece)
EFA École Franco-Allemande (French: Franco-German School)
EFA Effective Filtration Area (filter devices)
EFA Egyptian Football Association
EFA Exchange Fund Account (Department of Finance Canada)
EFA Estimated Financial Assistance
EFA Equipment Failure Analysis (various companies)
EFA Educational Foundation of America
EFA Educatieve Faculteit Amsterdam (Dutch: Amsterdam Faculty of Education; Amsterdam, Netherlands)
EFA Engineering Field Activity (SPAWAR)
EFA Exportatrice Française d'Agroalimentaire (French: Export of French Food)
EFA European Federation of Asthma and Allergy Associations
EFA European Fundraising Association
EFA European Federation of Allergy and Airway Diseases Patients Association (Brussels, Belgium)
EFA Extended File Attribute
EFA Environmental Foundation for Africa
EFA Ecological Farming Association
EFA Expedited Funds Availability Act
EFA Estrategia Fiscal Ambiental (Spanish: Environmental Tax Strategy; Guatemala)
EFA Exhibitions for Africa (trade show company)
EFA English Football Association
EFA Engineering Failure Analysis
EFA Edited For Accuracy
EFA End-Fire Array
EFA Everglades Forever Act of 1994
EFA Experiment Flight Applications
EFA External Function Acknowledge
EFA Export Finance Advisor
EFA Electrodiagnostic Functional Assessment
EFA Environment in Focus Association
EFA Early Flank Alarm
EFA Engineering Flight Activity
EFA Escuela Formativa Ágape (Guatemala school)
EFA Event Frequency Analysis
User avatar
KungFooBob
Posts: 14204
Joined: Sat Mar 14, 2020 1:04 pm
Location: The content of this post is not AI generated.
Has thanked: 539 times
Been thanked: 7530 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by KungFooBob »

Edited For Accuracy.
User avatar
Taipan
Posts: 13948
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15957 times
Been thanked: 10248 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Taipan »

weeksy wrote: Fri Jan 21, 2022 5:54 pm Interestingly, over on pb forum they were 10-0 in favour of the tail tidy.
I'd best join up, they sound like a forum of taste. How are they on belly pans and pillion seat covers? Asking for a friend...
User avatar
Taipan
Posts: 13948
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15957 times
Been thanked: 10248 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Taipan »

Taipan wrote: Wed Jan 19, 2022 9:50 pm
weeksy wrote: Tue Jan 18, 2022 9:10 pm
weeksy wrote: Fri Oct 22, 2021 3:59 pm
Image2021-10-22_03-57-38 by Steve Weeks, on Flickr



I know I'll be in the minority here but I think it's going to go back to standard tail end.


I think the tidy just looks a bit too cut.
For me they look like an afterthought. Its like the bike builders design and build a bike and then the legal guys say oh, add a number plate hanger. They just look wrong and out of place??
My tail tidy is different to yours.

Image
User avatar
Yorick
Posts: 16740
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 10266 times
Been thanked: 6886 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Yorick »

Taipan wrote: Fri Jan 21, 2022 6:15 pm
weeksy wrote: Fri Jan 21, 2022 5:54 pm Interestingly, over on pb forum they were 10-0 in favour of the tail tidy.
I'd best join up, they sound like a forum of taste. How are they on belly pans and pillion seat covers? Asking for a friend...
Not like you to be funny :obscene-birdiedoublered:
lostboy
Posts: 840
Joined: Fri Aug 28, 2020 3:03 pm
Has thanked: 2156 times
Been thanked: 426 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by lostboy »

weeksy wrote: Fri Jan 21, 2022 5:54 pm Interestingly, over on pb forum they were 10-0 in favour of the tail tidy.
The discerning on here (as well as Tiepin) know ;)
User avatar
weeksy
Site Admin
Posts: 23422
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by weeksy »

TBH i don't think i've massively decided... but i did want the bits to put it back to standard should the need arise.

I'll start caring more when the weather starts warming up.
Le_Fromage_Grande
Posts: 11234
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 607 times
Been thanked: 4124 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Le_Fromage_Grande »

I don't mind the mudguard thing on my bike, if anything I would like it a bit wider to keep spray off the bike, I may have to go "full Dodgy Knees"
User avatar
weeksy
Site Admin
Posts: 23422
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by weeksy »

I just looked at the Evotech Performance instructions as i was wanting to check where a little plastic jobbie goes... I then saw how many things i'll need to remove and re-add to get it back to stock lol

Image2021-10-22_09-25-51 by Steve Weeks, on Flickr

Image2021-10-22_09-26-00 by Steve Weeks, on Flickr
User avatar
Dodgy69
Posts: 5457
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1747 times
Been thanked: 2085 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Dodgy69 »

6mm drill bit.
Plastic fine cut jig saw blade and

https://www.ebay.co.uk/itm/3-mm-A4-HDPE ... 635-2958-0

😁👍
Yamaha rocket 3
User avatar
Taipan
Posts: 13948
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15957 times
Been thanked: 10248 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Taipan »

For a minute there I thought you'd bobtailed it! :shock: :lol:
User avatar
weeksy
Site Admin
Posts: 23422
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by weeksy »

Taipan wrote: Tue Jan 25, 2022 10:24 am For a minute there I thought you'd bobtailed it! :shock: :lol:
lol no.... but it will be going back to stock tomorrow after i collect the little bits needed for it.

I was watching Car SOS last night with the boy and they were doing up an RS1600i.. I was watching as they were pulling it apart and someone had basically done lots of 'things' that they thought were in some way better but in reality just Chavved up the car and made it unusable. That sort of echoed with me as a throwback to 1990 when we all did tail tidies, iridum visors and sparky sliders.... It's all just a bit, well, naff really.

The purists spend time taking cars, bikes etc back to standard these days because, well, it's 'right' and proper... and whilst that's usually in a restoration context, it just feels correct that i should go back to stock, even if it takes an hour or 2 to do so.... i'll get in the garage, music, beers and enjoy it.
User avatar
Taipan
Posts: 13948
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15957 times
Been thanked: 10248 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by Taipan »

I think the snow plough plate holders and huge exhaust cans are the ugliest, line spoiling things ever put on a bike! We'll have to agree to disagree on this one!
User avatar
weeksy
Site Admin
Posts: 23422
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: INCOMING, Happy 50th to me.... Yeah, it's a Yamaha... it's the easy option.

Post by weeksy »

Taipan wrote: Thu Jan 27, 2022 8:04 am I think the snow plough plate holders and huge exhaust cans are the ugliest, line spoiling things ever put on a bike! We'll have to agree to disagree on this one!
If you wanna replace yours with something 'new' then i'll happily throw mine in the post next week matey.

https://www.ebay.co.uk/itm/164099617497 ... Swu1BeV-RU

It's one of these and has about 15 miles use on it.