Squeaky Brakes?

Tips, tricks, questions and answers to tech questions
User avatar
Yorick
Posts: 15283
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 9174 times
Been thanked: 6175 times

Squeaky Brakes?

Post by Yorick »

Just put the Accossata master cylinder on (eventually) and have to take off both calipers to bleed properly. Like a prat I forgot to put something between the pads so had to use big screwdriver.
Pads are so soft they took some big gouges. Brand new pads :(

Test ride took about 20 miles before the the braking power came back.
But also along with an audible squeak.

Was only when going below 40. But maybe couldn't hear it faster.

Came home and pads seemed OK apart from gouges.
So put previous set in which where almost identical. The squeak went away.

Just curious what might have caused it .
Any ideas?
A_morti
Posts: 684
Joined: Mon May 25, 2020 8:35 am
Location: Malta
Has thanked: 286 times
Been thanked: 493 times

Re: Squeaky Brakes?

Post by A_morti »

Are the new pads identical, or might the design be different, different anti squeal shims or none fitted, etc?
The old fashioned remedy was to put a dab of high temp grease on the backs of the pads. Tried that yet?
User avatar
Yorick
Posts: 15283
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 9174 times
Been thanked: 6175 times

Re: Squeaky Brakes?

Post by Yorick »

A_morti wrote: Mon Mar 18, 2024 5:42 pm Are the new pads identical, or might the design be different, different anti squeal shims or none fitted, etc?
The old fashioned remedy was to put a dab of high temp grease on the backs of the pads. Tried that yet?
Both SBS race pads. No shims or whatever.
David
Posts: 1986
Joined: Tue Mar 17, 2020 8:50 am
Location: Top 'o the Worle
Has thanked: 204 times
Been thanked: 628 times

Re: Squeaky Brakes?

Post by David »

To stop pads squeaking we used to cut a slot in them. ( it changes the harmonics).
You appear to have done that backwards.
User avatar
Yorick
Posts: 15283
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 9174 times
Been thanked: 6175 times

Re: Squeaky Brakes?

Post by Yorick »

David wrote: Mon Mar 18, 2024 6:16 pm To stop pads squeaking we used to cut a slot in them. ( it changes the harmonics).
You appear to have done that backwards.
Aha, that makes sense :)
mel
Posts: 48
Joined: Fri Mar 20, 2020 10:00 pm
Has thanked: 8 times
Been thanked: 33 times

Re: Squeaky Brakes?

Post by mel »

Whilst it’s a bit late now and never the best idea using screwdriver , it happens , but as soon as you have a little gap try to get the screwdriver all the way through so your using he shoulder across the whole pads not just the end .
Tie or cable tie the brake lever back overnight- helps to get any last bits of air out if there is any - as it will push the air back up to the top of master cylinder , won’t help your squeal one way or the other mind 👍
User avatar
Yorick
Posts: 15283
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 9174 times
Been thanked: 6175 times

Re: Squeaky Brakes?

Post by Yorick »

Gave the original pads a right good going over on rough emery paper and put them back in.
No more noise 😀
User avatar
Horse
Posts: 10672
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 5415 times
Been thanked: 4608 times

Re: Squeaky Brakes?

Post by Horse »

Oh for the good old days of Visordown and a quick, simple, answer of "WD40"
Even bland can be a type of character :wave: