2004 Aprilia RSV1000R Factory
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
2004 Aprilia RSV1000R Factory
12k miles, excellent mechanical condition (throttle bodies balanced and bill of good health from AP Workshops this year), few marks commensurate with year but in good condition overall.
Will take more photos when I’ve cleaned it properly tomorrow.
£3850
Will take more photos when I’ve cleaned it properly tomorrow.
£3850
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
Re: 2004 Aprilia RSV1000R Factory
Some more details and photos...
Firstly the mileage... The odometer reset in 2011 at roughly 2000 miles. It also reset at 10,900 miles last week and is now showing zero miles. This means that the bike has done in the order of 13,000 miles and the mot history backs that up. I've only done a couple of hundred miles on it at most this year. This is why I'm selling it, I'm just not that in to sports bike at the moment and it's not getting any use.
The MOT is due in November so I'll get another 12 months put on this this week.
The condition is good but there are some marks on the bodywork from being rubbed in the garage I assume. They're not bad enough that it's from a drop I don't think. You can see these in the picture of the right side of the panel. There was also some bubbling on the tank on the left hand side as is very common on these bikes and with most bikes with plastic tanks from the time. I drained the tank and kept it some where warm for the winter but it didn't pull the two large bubbles back in. The choice was either to paint the tank, get a second hand one or something else. In the event I cut out the bubbles because I didn't want the problem spreading and made some custom tank grip pads from 2mm EVA foam in a grey/silver colour. I've used this on track bike as it doesn't soak up water, doesn't damage your leather, is comfortable and easily replaced. I'm not selling this as a mint bike and couldn't justify the full respray but also didn't want to hide what I'd done.
Service and work history from myself and the previous owner...
- Feb 23, Throttle bodies balanced and given bill of health at AP
- Feb 23, New in tank fuel filters, in tank hoses, spark plugs, battery and oberon clutch slave cylinder fitted
- Jan, 22, Ohlins fork and shock service
- Nov 21, Oil service at AP, uprates suspension linkage plates fitted
- Oct 21, Fireblade sidestand fitted (common mod)
- Oct 21, suspension bearing kit, AP performance starter kit
- Oct 21, Replacement headers and new akrapovic titanium exhaust system
- Oct 21, New reg/rec and wiring repairs
- Sep 21, New cam chain tensioners
Tyres are Bridgestone S22s with plenty of life in them.
I have two keys for this bike and the swingarm recall has been done.
The bike is ready to ride.
This is the bike starting from cold having been previous run two days earlier...
Firstly the mileage... The odometer reset in 2011 at roughly 2000 miles. It also reset at 10,900 miles last week and is now showing zero miles. This means that the bike has done in the order of 13,000 miles and the mot history backs that up. I've only done a couple of hundred miles on it at most this year. This is why I'm selling it, I'm just not that in to sports bike at the moment and it's not getting any use.
The MOT is due in November so I'll get another 12 months put on this this week.
The condition is good but there are some marks on the bodywork from being rubbed in the garage I assume. They're not bad enough that it's from a drop I don't think. You can see these in the picture of the right side of the panel. There was also some bubbling on the tank on the left hand side as is very common on these bikes and with most bikes with plastic tanks from the time. I drained the tank and kept it some where warm for the winter but it didn't pull the two large bubbles back in. The choice was either to paint the tank, get a second hand one or something else. In the event I cut out the bubbles because I didn't want the problem spreading and made some custom tank grip pads from 2mm EVA foam in a grey/silver colour. I've used this on track bike as it doesn't soak up water, doesn't damage your leather, is comfortable and easily replaced. I'm not selling this as a mint bike and couldn't justify the full respray but also didn't want to hide what I'd done.
Service and work history from myself and the previous owner...
- Feb 23, Throttle bodies balanced and given bill of health at AP
- Feb 23, New in tank fuel filters, in tank hoses, spark plugs, battery and oberon clutch slave cylinder fitted
- Jan, 22, Ohlins fork and shock service
- Nov 21, Oil service at AP, uprates suspension linkage plates fitted
- Oct 21, Fireblade sidestand fitted (common mod)
- Oct 21, suspension bearing kit, AP performance starter kit
- Oct 21, Replacement headers and new akrapovic titanium exhaust system
- Oct 21, New reg/rec and wiring repairs
- Sep 21, New cam chain tensioners
Tyres are Bridgestone S22s with plenty of life in them.
I have two keys for this bike and the swingarm recall has been done.
The bike is ready to ride.
This is the bike starting from cold having been previous run two days earlier...
Last edited by dern on Sun Sep 03, 2023 5:12 pm, edited 2 times in total.
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
Re: 2004 Aprilia RSV1000R Factory
This shows you what I've done to cover the bubbling paint on the tank. The first picture shows the large bubbles I've cut out to stop them spreading and the tank grips I made to fit the bike...
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2084 times
- MingtheMerciless
- Posts: 3551
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2940 times
- Been thanked: 1882 times
Re: 2004 Aprilia RSV1000R Factory
Nice looking bike but don’t have the space or time.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
Re: 2004 Aprilia RSV1000R Factory
On ebay and facebook marketplace for £3850 so bringing the price in line on here.
- gremlin
- Posts: 5927
- Joined: Wed Jul 08, 2020 3:12 pm
- Location: Kent (AKA God's own country)
- Has thanked: 808 times
- Been thanked: 4793 times
Re: 2004 Aprilia RSV1000R Factory
The restoration would have made a cracking thread. Missed opportunity there, sunshine.
There's a whole lot of mentalness for the money there. Somebody's gonna grab a bargain.
There's a whole lot of mentalness for the money there. Somebody's gonna grab a bargain.
All aboard the Peckham Pigeon! All aboard!
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
Re: 2004 Aprilia RSV1000R Factory
I'm already restoring one bike and have another one waiting, the last thing I need is to start stripping this down.
Besides, it's in good condition and worth the money I think. If I spent more money on it I'd never get it back and I find it too uncomfortable (at my age sonny) to be a keeper even though it looks and sounds amazing.
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
-
- Posts: 2527
- Joined: Mon Mar 16, 2020 7:37 pm
- Location: Layer-de-la-Haye
- Has thanked: 2248 times
- Been thanked: 1242 times
Re: 2004 Aprilia RSV1000R Factory
Absolute bargain.
I loved mine, one of rhe few bikes I regret selling.
I loved mine, one of rhe few bikes I regret selling.
- dern
- Posts: 2131
- Joined: Wed Aug 18, 2021 8:51 am
- Has thanked: 1014 times
- Been thanked: 1766 times
- Skub
- Posts: 12166
- Joined: Mon Mar 16, 2020 5:32 pm
- Location: Norn Iron
- Has thanked: 9819 times
- Been thanked: 10143 times
Re: 2004 Aprilia RSV1000R Factory
I can't see the deal falling through on that front. The bike looks sweet.
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Walt Whitman
https://soundcloud.com/skub1955
- Count Steer
- Posts: 11799
- Joined: Mon Jul 19, 2021 4:59 pm
- Has thanked: 6374 times
- Been thanked: 4745 times
Re: 2004 Aprilia RSV1000R Factory
If he hadn't mentioned that it's unsuitable for old folk I'd have been in there.
Doubt is not a pleasant condition.
But certainty is an absurd one.
Voltaire
But certainty is an absurd one.
Voltaire