Page 5 of 8

Re: Honda mini bikes.

Posted: Thu Feb 26, 2026 7:42 pm
by Skub
Dodgy69 wrote: Thu Feb 26, 2026 5:26 pm What lube do you use. ?
Chainsaw oil. It's quite close to Scottoil,but much cheaper. :D

Re: Honda mini bikes.

Posted: Thu Feb 26, 2026 7:43 pm
by KungFooBob
Get 19th of April in your diary Dogester!

Re: Honda mini bikes.

Posted: Thu Feb 26, 2026 8:12 pm
by Dodgy69
It's a bit of a run that. 🤔 Just checked 79 miles, piece of cake. 👍

Re: Honda mini bikes.

Posted: Thu Feb 26, 2026 10:52 pm
by A_morti
Dodgy69 wrote: Thu Feb 26, 2026 2:30 pm chains are shite, needs slack taking out almost after every ride and it's got a tight spot already. They are a lightweight chain and none O ring, more like a pushbike chain. ( none O ring ).

On forums everyone changes to a more heavy duty O ring type,
I think I was the first for that

https://www.hondagrom.net/threads/428-c ... rade.8005/

Re: Honda mini bikes.

Posted: Fri Feb 27, 2026 7:52 am
by Dodgy69
They're getting me a 420 o ring from somewhere and keeping same sprockets. Only 600 miles done. Though they do seem harder to find than 428, I think. 👍

Re: Honda mini bikes.

Posted: Fri Mar 13, 2026 7:51 am
by A_morti
Dodgy69 wrote: Fri Feb 27, 2026 7:52 am They're getting me a 420 o ring from somewhere and keeping same sprockets. Only 600 miles done. Though they do seem harder to find than 428, I think. 👍
As I put on that thread, 428 is good if you're getting a big bore kit and worth doing whenever you need a whole kit anyway. Until then, 420 is fine too as 9bhp isn't exactly going to snap it on the next power wheelie...

Re: Honda mini bikes.

Posted: Fri Mar 13, 2026 8:17 am
by Dodgy69
I'll be leaving as it is. It's plenty fast enough for the poxy roads it's mainly used on. 👍

Re: Honda mini bikes.

Posted: Fri Mar 13, 2026 10:41 am
by Supermofo
I know it's Groms not Monkeys, but who says you can't race..or crash one :lol:


Re: Honda mini bikes.

Posted: Sun Mar 15, 2026 6:22 am
by Jody
https://www.facebook.com/share/r/1FYRjU1SNx/

Saw this on Faceberk and thought of this thread.....

Re: Honda mini bikes.

Posted: Sun Mar 15, 2026 10:53 am
by Skub
Jody wrote: Sun Mar 15, 2026 6:22 am https://www.facebook.com/share/r/1FYRjU1SNx/

Saw this on Faceberk and thought of this thread.....
Looks very hurty. :silent:

Re: Honda mini bikes.

Posted: Sun Mar 15, 2026 11:02 am
by A_morti
Skub wrote: Sun Mar 15, 2026 10:53 am
Jody wrote: Sun Mar 15, 2026 6:22 am https://www.facebook.com/share/r/1FYRjU1SNx/

Saw this on Faceberk and thought of this thread.....
Looks very hurty. :silent:
In this life you get a choice: an 890cc Grom, or longevity.

Even when my Grom briefly had a 180cc kit it would power wheelie in 2nd, that thing will be an absolute animal.

Re: Honda mini bikes.

Posted: Mon Mar 16, 2026 6:53 pm
by Dodgy69
Today the mighty monkey had a dress rehearsal for luggage carrying capabilities and is good to go. 👍

Nice weather pending so we're gonna have a couple of days in Wales, taking in some fine roads and scenery. It's a bit of a guess how far I can get in a day, so not sure what time I'll get to accommodation.

Safe parking is the biggest concern, followed closely by food and beer availability. Wednesday and Thursday nights can be quiet and not every pub does food. Fingers crossed I get fed and watered and bike is still there in the morning. 😁👍

Image

Re: Honda mini bikes.

Posted: Mon Mar 16, 2026 7:13 pm
by Rockburner
Dodgy69 wrote: Mon Mar 16, 2026 6:53 pm Today the mighty monkey had a dress rehearsal for luggage carrying capabilities and is good to go. 👍

Nice weather pending so we're gonna have a couple of days in Wales, taking in some fine roads and scenery. It's a bit of a guess how far I can get in a day, so not sure what time I'll get to accommodation.

Safe parking is the biggest concern, followed closely by food and beer availability. Wednesday and Thursday nights can be quiet and not every pub does food. Fingers crossed I get fed and watered and bike is still there in the morning. 😁👍

Image
Can you take a strap and carry it up to the room like a large bag? :D

Re: Honda mini bikes.

Posted: Mon Mar 16, 2026 7:22 pm
by Dodgy69
2 of you could. 🙂👍

Re: Honda mini bikes.

Posted: Mon Mar 23, 2026 8:24 pm
by Skub
Trade in for @Dodgy69 ?

Re: Honda mini bikes.

Posted: Mon Mar 23, 2026 8:56 pm
by Dodgy69
Nice.

Re: Honda mini bikes.

Posted: Wed Mar 25, 2026 8:37 am
by Count Steer
Skub wrote: Mon Mar 23, 2026 8:24 pm Trade in for @Dodgy69 ?
Given the relative sizes of the engine and tank He'd need to tow a fuel bowser behind that one to do his Wales trip. :lol:

Nice job though. :thumbup:

Re: Honda mini bikes.

Posted: Wed Mar 25, 2026 3:39 pm
by Dodgy69
Shit day in Shropshire today, just waiting for an earthquake and then we've had the lot i reckon. 😯

Anyway, the monkey needs a bigger rack coz the proper one is too narrow for roll bags etc, ok for little day bag but no good when away for the night.

Found a top off a storage container, that'll do, bit of pissing about getting holes in the right place, making sure it doesnt rub the seat. Found a piece of plastic that'll work as a big washer and job done.

It's off again now but it's ready for next time. No laughing at the back please. :wtf:

Image

Image

Image

Re: Honda mini bikes.

Posted: Wed Mar 25, 2026 3:52 pm
by Skub
A couple of bricks strapped to the rack and it'll be a stunt munky. :thumbup:

Re: Honda mini bikes.

Posted: Wed Mar 25, 2026 3:57 pm
by Rockburner
Dodgy69 wrote: Wed Mar 25, 2026 3:39 pm Shit day in Shropshire today, just waiting for an earthquake and then we've had the lot i reckon. 😯

Anyway, the monkey needs a bigger rack coz the proper one is too narrow for roll bags etc, ok for little day bag but no good when away for the night.

Found a top off a storage container, that'll do, bit of pissing about getting holes in the right place, making sure it doesnt rub the seat. Found a piece of plastic that'll work as a big washer and job done.

It's off again now but it's ready for next time. No laughing at the back please. :wtf:

Image

Image

Image
Is that plastic going to be strong and stiff enough to support a rollbag?? I'm assuming the tie-downs will actually be going around something metal, and this is merely a means to stop the rollbag hanging off either side... well, somewhat.