You mean paying for their premises, their staff, etc ?
Tracer out...MT09 in. 😁👍
- weeksy
- Site Admin
- Posts: 23415
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5449 times
- Been thanked: 13085 times
- Yorick
- Posts: 16736
- Joined: Sat Mar 14, 2020 8:20 pm
- Location: Paradise
- Has thanked: 10263 times
- Been thanked: 6885 times
Re: Tracer out...MT09 in. 😁👍
That's not my problem. If you go to a fancy showroom, you pay a lot more than a smaller garage. Your choice.
- Taipan
- Posts: 13945
- Joined: Sat Mar 14, 2020 1:48 pm
- Location: Essex Riviera!
- Has thanked: 15949 times
- Been thanked: 10243 times
Re: Tracer out...MT09 in. 😁👍
That's why mobile mechanics used to be cheaper still, but you cant say a main dealers is a rip off as such. Bigger places with bigger workshops and more staff means more overheads. When I worked at a (car) dealership, you were also expected to carry £xxxxx in parts stock and merch etc. Also worth noting that on modern vehicles the dealer plugs in the OBD port and there can be software updates to come through. You wont get that at Bobs Bikes under the arches!
- weeksy
- Site Admin
- Posts: 23415
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5449 times
- Been thanked: 13085 times
Re: Tracer out...MT09 in. 😁👍
Or buy new bikes as all the dealers have closed down because no one uses them. Or have new technology developed as there's no manufacturers left either, etc etc.Taipan wrote: ↑Wed Nov 03, 2021 6:29 pmThat's why mobile mechanics used to be cheaper still, but you cant say a main dealers is a rip off as such. Bigger places with bigger workshops and more staff means more overheads. When I worked at a (car) dealership, you were also expected to carry £xxxxx in parts stock and merch etc. Also worth noting that on modern vehicles the dealer plugs in the OBD port and there can be software updates to come through. You wont get that at Bobs Bikes under the arches!
- Yorick
- Posts: 16736
- Joined: Sat Mar 14, 2020 8:20 pm
- Location: Paradise
- Has thanked: 10263 times
- Been thanked: 6885 times
Re: Tracer out...MT09 in. 😁👍
If the dealers didn't charge so much, they'd survive. They don't need a 5* showroom.weeksy wrote: ↑Wed Nov 03, 2021 6:34 pmOr buy new bikes as all the dealers have closed down because no one uses them. Or have new technology developed as there's no manufacturers left either, etc etc.Taipan wrote: ↑Wed Nov 03, 2021 6:29 pmThat's why mobile mechanics used to be cheaper still, but you cant say a main dealers is a rip off as such. Bigger places with bigger workshops and more staff means more overheads. When I worked at a (car) dealership, you were also expected to carry £xxxxx in parts stock and merch etc. Also worth noting that on modern vehicles the dealer plugs in the OBD port and there can be software updates to come through. You wont get that at Bobs Bikes under the arches!
- weeksy
- Site Admin
- Posts: 23415
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5449 times
- Been thanked: 13085 times
Re: Tracer out...MT09 in. 😁👍
Well we're clearly not going to agree, so left move on..Yorick wrote: ↑Wed Nov 03, 2021 6:35 pmIf the dealers didn't charge so much, they'd survive. They don't need a 5* showroom.weeksy wrote: ↑Wed Nov 03, 2021 6:34 pmOr buy new bikes as all the dealers have closed down because no one uses them. Or have new technology developed as there's no manufacturers left either, etc etc.Taipan wrote: ↑Wed Nov 03, 2021 6:29 pm
That's why mobile mechanics used to be cheaper still, but you cant say a main dealers is a rip off as such. Bigger places with bigger workshops and more staff means more overheads. When I worked at a (car) dealership, you were also expected to carry £xxxxx in parts stock and merch etc. Also worth noting that on modern vehicles the dealer plugs in the OBD port and there can be software updates to come through. You wont get that at Bobs Bikes under the arches!
@Dodgy knees what winter mods you thinking?
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
Re: Tracer out...MT09 in. 😁👍
Put the best part of 200 miles on it today. Dry in the sun but where the sun don't shine, care required. Got home and pillion seat and jacket once again covered in shit. That's with the box on.
There's a gap between seat and rack/box and spray is coming through. Got to think of something to block this up, maybe a piece of plastic/perspex to fill gap cabled tied to rack. Not great for a new bike.
I have had a few bikes with tidys on and never had it as bad as this. Problem being the short arse end of these bikes, along with yamaha official tail tidy. Cracking bike though.
Any ideas appreciated.
There's a gap between seat and rack/box and spray is coming through. Got to think of something to block this up, maybe a piece of plastic/perspex to fill gap cabled tied to rack. Not great for a new bike.
I have had a few bikes with tidys on and never had it as bad as this. Problem being the short arse end of these bikes, along with yamaha official tail tidy. Cracking bike though.
Any ideas appreciated.
Yamaha rocket 3
- Skub
- Posts: 12167
- Joined: Mon Mar 16, 2020 5:32 pm
- Location: Norn Iron
- Has thanked: 9819 times
- Been thanked: 10144 times
Re: Tracer out...MT09 in. 😁👍
The badger was right then.Dodgy knees wrote: ↑Thu Nov 04, 2021 7:09 pm Put the best part of 200 miles on it today. Dry in the sun but where the sun don't shine, care required. Got home and pillion seat and jacket once again covered in shit. That's with the box on.
There's a gap between seat and rack/box and spray is coming through. Got to think of something to block this up, maybe a piece of plastic/perspex to fill gap cabled tied to rack. Not great for a new bike.
I have had a few bikes with tidys on and never had it as bad as this. Problem being the short arse end of these bikes, along with yamaha official tail tidy. Cracking bike though.
Any ideas appreciated.
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Walt Whitman
https://soundcloud.com/skub1955
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
Re: Tracer out...MT09 in. 😁👍
I wouldn't want to be a pillion that's for sure I may be able to move the rack support bar forward, hopefully closing the gap.
Yamaha rocket 3
- weeksy
- Site Admin
- Posts: 23415
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5449 times
- Been thanked: 13085 times
Re: Tracer out...MT09 in. 😁👍
Fit the standard back end on again?Dodgy knees wrote: ↑Thu Nov 04, 2021 7:09 pm Put the best part of 200 miles on it today. Dry in the sun but where the sun don't shine, care required. Got home and pillion seat and jacket once again covered in shit. That's with the box on.
There's a gap between seat and rack/box and spray is coming through. Got to think of something to block this up, maybe a piece of plastic/perspex to fill gap cabled tied to rack. Not great for a new bike.
I have had a few bikes with tidys on and never had it as bad as this. Problem being the short arse end of these bikes, along with yamaha official tail tidy. Cracking bike though.
Any ideas appreciated.
Only ride in summer?
Trailer it to dry places?
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
Re: Tracer out...MT09 in. 😁👍
Don't like standard and it's staying in the bin. It'll get sorted sooner or later.
Yamaha rocket 3
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
Re: Tracer out...MT09 in. 😁👍
Puig screen on, metal one gone Looks a lot better i reckon. Just the right amount of cover. 530 miles done, better sort out service.
Yamaha rocket 3
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
Re: Tracer out...MT09 in. 😁👍
Thought I better try front end stand. Works great. 3rd bike now. Bought for sdgt, then when tracer arrived had to take some metal off the insert bit. Tracer and mt must be about the same. All good for tyre swaps.
First service tomorrow.
First service tomorrow.
Yamaha rocket 3
Re: Tracer out...MT09 in. 😁👍
That screen looks great, doesn't look too big in the photos. Threw my leg over an SP at the weekend, really nice. Feels a similar size and fit to my Trident.
Yamaha MT09 SP
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
Re: Tracer out...MT09 in. 😁👍
Definitely lower than a tracer. Light as a feather.
You still happy with the trident.??
You still happy with the trident.??
Yamaha rocket 3
-
- Posts: 4999
- Joined: Mon Mar 16, 2020 3:39 pm
- Has thanked: 4359 times
- Been thanked: 2850 times
Re: Tracer out...MT09 in. 😁👍
Yea, was picked up at the first service. Sat in the dealer for almost 3 weeks with pretty much communication or call backs. A very long story short I went to Triumph direct and got it sorted.
The bike has been great, other than a very clunky gearbox. 2nd to 3rd and to 4th can often be as clunky as engaging first from neutral. I've read this quite a few times on owners groups. But everything else about the bike is great so far.
The bike has been great, other than a very clunky gearbox. 2nd to 3rd and to 4th can often be as clunky as engaging first from neutral. I've read this quite a few times on owners groups. But everything else about the bike is great so far.
Yamaha MT09 SP
- Dodgy69
- Posts: 5455
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1745 times
- Been thanked: 2085 times
Re: Tracer out...MT09 in. 😁👍
Changing gear at different revs makes no difference I presume. May smooth out with miles.
Yamaha rocket 3