revtothelimit - motorbike forum

Today I have done nothing that I had planned to do. On the plus side I moved my Son into his new room and he got off his lazy arse and helped, which was nice. Now were off to Waitrose to spend more on the same stuff we could have bought in Tesco for less. Aces. Not.

Bit of top down driving, bit of antique mooching, now I'm sat in the curry house (yeah it's early, but I'm hungry).

Bigyin wrote: Sat Sep 18, 2021 3:44 pm Today was something @Noggin would be proud of

1) Went to local shop on my way to the gym this morning and managed to somehow lock the keys in the car .... walked all the way home to get spare key and back to the car again.

2) Whilst at gym managed to catch my finger under a 20KG dumbell ...... fucking OUCH!!!!!

3) Got back home a tad pissed off so thought i would take the Ducati out for a play as it was a sunny warm day with free time. 30 minutes in and the rear feels a bit weavy on bends. Pressure seems way down so wuick look around the tyre and there is a deep 1.5cm curved cut in the tread. Refilled tyre with air at petrol station and managed to get home and pressure dropped from 36 to 22.5 PSI so that tyre is fucked with loads of mileage left on it

They say it comes in threes so hopefully thats all that can go wrong today ....... FML

I'd have cut my losses at the dumbell incident and left the bike in the garage. Maybe sit and break a few matches.

Took a ride to the Ace Cafe for breakfast- nice ride avoiding motorways and got the chance to use my heated grips before the sun broke through. Very happy with both grips and breakfast

Very nearly had to shred my “man card” after spending the best part of an hour failing to set up the toe-in of my road bikes brakes. I then found that I’d put one of the washers with a concave surface on the brake pad the wrong way round….

Klutz!

Took mother-in-law out to Bluewater. She is disabled and has dementia. Went for a cup of tea in M&S, she sat there and told me and Mrs. Gremlin that we were 'getting on her nerves' and that we were 'a bunch of cunts'.

You either laugh or cry.

I moved some stuff out of the garage



so I could replace the manky flooring with carpet tiles (thanks to cheb)

Then I put most of the stuff back into the garage



and took the stuff that wouldn't fit to the tip.

@Druid You're another one with all the reg plates on the back wall.

Yes, all the way back to a Suzuki T500 I had in 1981

Went to my Daughters for dinner. Lovely day and had fun watching this pair of maniacs. Brand new house and their drains were blocked! I suspect builders crap or pastie wrappers down there? Anyway, manhole covers off and hosepipes shoved into shit and an hour later all was flowing well. S'what Dads are for innit!

Druid wrote: Sun Sep 19, 2021 8:22 pm Yes, all the way back to a Suzuki T500 I had in 1981

That VFR plate always stuck me as a bad omen

Taipan wrote: Sun Sep 19, 2021 9:10 pm S'what Dads are for innit!

My SDad used to be handed knives and the steel when he walked in!! LOL I've never been able to sharpen a knife well with a steel, so that was something he always did!! LOL (Made carving easier as generally if he was there, everyone was there for dinner!)

But he did also help me with lots of DIY stuff! Dads rock!

Half of me feels that I haven't had a productive day, but I have really

Done some paperwork I've been putting off for ages!

Made ginger cake - I'm going to the valley tomorrow and seeing various friends; whilst it's nice to take cake, it's actually really good for me to bake (mentally good) so I can only really do that when I'm seeing people that I can give cake to!! LOL (Physio, teacher and friends will all appreciate it!)

Sorted a load of wool out cos I'm off to cat sit in another resort from Friday so need to sort out some unfinished projects to take with me! Might add a cross stitch project too!

Put some dried fruit to soak in alcohol. When I get back from the cat sit I will probably make christmas cake and mincemeat for mince pies, so soaking the fruit is a good start!

Sorted out some finished projects that I need to post tomorrow


And now, I have to do my French homework! I do leave it until the day before the lesson but mainly so I can actually remember what I've done when I have the lesson!!

Before the lesson tomorrow, I'm meeting with the boss of the company I'm working for this winter. Another friend (who has worked for him for years) has suggested I ask nicely if I can rent a van from him for a few weeks!! Gotta see how the chat goes before I drop that in but would be handy to get to lessons and physio in the valley! Now the resort physio has gone home for the interseason, I need to get down to the valley a lot!! LOL

It's been a good day considering the weather is doing that rare version of a slightly colder wet/grey/english day

Here's hoping for sunshine tomorrow

Noggin wrote: Mon Sep 20, 2021 8:35 am

Taipan wrote: Sun Sep 19, 2021 9:10 pm S'what Dads are for innit!

I've never been able to sharpen a knife well with a steel...

There may be a good reason for that.

'A so-called sharpening steel—also called a honing rod—which is the metal rod sold with most knife sets, doesn't really sharpen a knife, but rather hones the edge of a slightly dulled blade. Sweeping the blade along the steel realigns the edge so you don't have to sharpen as frequently.'

Driven to Inveraray for the first night of a pootle round Scotland. Currently sat in the the bar at the Inveraray Inn.

Skub wrote: Sun Sep 19, 2021 7:58 pm @Druid You're another one with all the reg plates on the back wall.

I'd need another garage!

Count Steer wrote: Mon Sep 20, 2021 4:46 pm

Noggin wrote: Mon Sep 20, 2021 8:35 am

Taipan wrote: Sun Sep 19, 2021 9:10 pm S'what Dads are for innit!

I've never been able to sharpen a knife well with a steel...

There may be a good reason for that.

'A so-called sharpening steel—also called a honing rod—which is the metal rod sold with most knife sets, doesn't really sharpen a knife, but rather hones the edge of a slightly dulled blade. Sweeping the blade along the steel realigns the edge so you don't have to sharpen as frequently.'

I was taught how at college, but even there I couldn't!! Now (as a 1.5-armed-kack-handed bird) I have a little thingy from amazon that I run them through!! Haven't attempted to use a steel for over 20 years!! LOL

weeksy wrote: Mon Sep 20, 2021 4:54 pm

Skub wrote: Sun Sep 19, 2021 7:58 pm @Druid You're another one with all the reg plates on the back wall.

I'd need another garage!

Couchy would need a warehouse.

Noggin wrote: Mon Sep 20, 2021 5:12 pm

Count Steer wrote: Mon Sep 20, 2021 4:46 pm

Noggin wrote: Mon Sep 20, 2021 8:35 am
I've never been able to sharpen a knife well with a steel...

There may be a good reason for that.

'A so-called sharpening steel—also called a honing rod—which is the metal rod sold with most knife sets, doesn't really sharpen a knife, but rather hones the edge of a slightly dulled blade. Sweeping the blade along the steel realigns the edge so you don't have to sharpen as frequently.'

I was taught how at college, but even there I couldn't!! Now (as a 1.5-armed-kack-handed bird) I have a little thingy from amazon that I run them through!! Haven't attempted to use a steel for over 20 years!! LOL

I've been through the faff of using a whetstone and all that malarkey and bought a Japanese thing with ceramic wheels in which works a treat. I just give 'em a brisk go over with the steel every few uses. The purists will scoff but tbh they talk more about knives than cooking.

Cycled 3 miles to pub to watch footy.
No mask.
Cycled home.
Watching footy at home.

I have masks attached to both my pairs of sunnies, so never forget in the day.
But still forget at night