revtothelimit - motorbike forum

Lovely job. Thanks for sharing

Congrats on sperm count MC. Get all yer projects done soon.

A beautiful bike. But IMHO, that silly reg plate just kills it. Sorry.

Yorick wrote: Fri Nov 27, 2020 10:07 pm that silly reg plate just kills it. Sorry.

It's period innit. Just needs a slogan on the bottom of the plate... "póg mo thóin"

Looks superb, enjoy it while you have time before the nipper comes along

Thanks for all of the replies - And the Congrats, Its appreciated!

I probably do need to get another starter for a project in before the nipper comes or it may never happen

Yorick wrote: Fri Nov 27, 2020 10:07 pm that silly reg plate just kills it.

I get your point Yoz - I've actually got two plates for it, easily interchangeable as they are Velcro mounted... That one and a normal one. The thinking was 'Period' when I got it as they were all like that at the time so wanted to be a bit retro.

KungFooBob wrote: Fri Nov 27, 2020 10:10 pm It's period innit. Just needs a slogan on the bottom of the plate... "póg mo thóin"

I brought a TZR 125 when I was 17 and it had a tiny plate on it (I'm talking not much bigger than ruler size) that had 'Bye Bye GTi' on the bottom of it..... That went in the bin very quickly

Stunning job, MC ... Cant wait to see it with the finished petrol tank.

mikeycee wrote: Fri Nov 27, 2020 11:46 pm brought a TZR 125 when I was 17 and it had a tiny plate on it (I'm talking not much bigger than ruler size) that had 'Bye Bye GTi' on the bottom of it..... That went in the bin very quickly

I had a mate with that slogan, but worked a bit better on a ZX9

Supermofo wrote: Mon Nov 30, 2020 3:45 pm I had a mate with that slogan, but worked a bit better on a ZX9

Haha yes - Probably more valid on that than on a shagged out 125

Tank now back, Fitted and the tap serviced with new seals etc









I have a minor issue with the alignment of a line or two from the tank to the side panels, but we are going to take a look at this in the spring now and get things rectified - So for now, Aside from some carbon bits I am waiting for from the slowest UK Supplier in the entire world, I think I am about finished!

Now - Off to Ebay to look at some NC35's I think......

Enjoy your Sunday!

Fantastic job Mikey C and congrats on imminently becoming a dad

Like mentioned above, get couple of projects in before baby arrives - or even before buying cots, buggies , car seats and all the other shit needed these days!

Oh, and I'm with Yoz on the plate font

G.P wrote: Sun Dec 06, 2020 2:30 pm Fantastic job Mikey C and congrats on imminently becoming a dad

Like mentioned above, get couple of projects in before baby arrives - or even before buying cots, buggies , car seats and all the other shit needed these days!

Oh, and I'm with Yoz on the plate font

Thanks GP!

Your right I do need to get at least one thing started before August - I will get to work on this straight away I think

Thanks for the feedback on the plate as well - I can take it!

Hi All!

Hope your all ok and eagerly looking forward to the end of lockdown.... And a mild spring!

Its been a while since I updated this, The last few months have been a mishmash of good things and bad things - And pretty much everything in my life was put on hold as the stress and strain of absolutely everything got on top of me.

Last update I made was December 6th, Bike was looking good... I was pretty much complete aside from a few finishing touches (Carbon etc), I was getting married on the following Saturday... Despite everything that lockdown had thrown at me and my family (As well as everyone else of course), Things were looking pretty good, and really positive for a change in a year that had been about as shit as it could have been.

Unfortunately however, It seemed that 2020 Wasn't quite done with me....

On December 7th, my mum was taken Ill quite suddenly and passed away the following morning - I wont go into detail as there is too much to write but when she did pass it all happened very quickly when she went (Which is a small consolation I guess). There is a lot more to it than just that but as I say too much to write on here.

So Mum leaves us on the 8th, Then we have the wedding (Which nearly got canned) on the 12th - Then Christmas, New Year and then I pretty much hit rock bottom and needed to fix my head for a bit.

So now getting back on track again, focusing on the new addition (A Boy!) which is due with us in August and finally getting back on to getting the RGV Finished.

Small change to the paintwork which you will notice on the pictures below which consisted of correcting the alignment of a couple of lines and a little doodle on the tank as a little nod to my lovely mum (who was really interested in this build and loved looking at the photos as things progressed), a few new bolt sets, the addition of some Carbon bits and also a full strip and rebuild of the rear caliper - As it appears I screwed something up last time around which resulted in a sticky piston.

So that is it really, All done..... Next up will be a fresh MOT, Tax and then out on the road for the spring to get a few more miles under its belt!





Mum used to love feeding the birds, Her garden was full of feeders and she used to sit out there for hours and hours just watching them do their thing


State of that rear tyre










I'm pleased to announce also that the RGV has won its first award courtesy of 44Teeth in the form of being the winner of the 'Show us Your Growler' Section of their new lockdown news show a couple of weeks ago..... High praise indeed, Nice to see it out there for all to see too!

So, Not really sure whats next - I have been saving the pennies and have a little bit of a fund together for the next project in the line, However there is nothing that is really fitting my limited budget at the moment. The prices of absolutely everything second hand that is vaguely desirable seems to have rocketed since we hit the tail end of last year. Must be Covid related somehow but not sure how long it will be before these crazy prices start to settle, Its just madness. A lot of bikes out there are selling at inflated prices, but there are some RGV's, RVF's, VFR's etc out there with the most absolutely ridiculous price tags and they will just sit there, unsold for ever - Even some complete shitters, its crazy.

So, Ill just wait it out I guess until something comes along as I dont want to just pick something up that doesn't interest me just so I have something on the go as there will be no satisfaction in the project 'Journey', Which is the whole reason I do these things for. I've got plenty to keep me busy in my 'Up' Days (I am still a bit all over the place at the moment, Thinking of going to see Quack as its not exactly passing as I hoped it would). I've got an old Valve Radio that belonged to my Grandad from back in 1948 that I am trying (As yet unsuccessfully) to renovate, and also I am looking to floor the Garage..... Oh and the small matter of our Son who will be along before I know it so plenty to get on with

Thanks for all your support on this, its been good having you all following and also giving me your Advice, feedback / Slagging off my number plate font both on here and back on TRC - Its been nice documenting everything on here!

Ill stick some more pics on here once I get it out and about - But for now, Thanks for coming on the journey with me

That's a lovely thought!

Trust me, your whole concept of an up day, a down day and things to keep you busy will change when the little one arrives. In the best possible way

I'll keep an eye out on the roundabouts for you!

You've been on a rollercoaster Mikey C.

Condolences for your Mum and grats on the bairn.

The RGV looks mint.

Condolences, sorry for your loss.

Congratulations on the baby news, they can drive you nuts but kids are bloody magic a love like no other.

My bro and I were chatting about your RGV being on 44 Teeth, cracking bike you should be justly proud of its top work

Condolences, RIP your mum.

The bike looks stunning and the little "doodle" is truly beautiful in its own way. Lovely.

Congrats on getting married and both the "win" and the forthcoming parenthood. August babies are awesome, got three of them (one is my wife) so expensive month!

Love the doodle

Thanks for the responses all - It really is appreciated.

Cant wait to get out of lockdown and back on the road with it as soon as spring hits