Happy new bike day.... WTF, what do you mean it's a Yamaha ???
-
- Posts: 963
- Joined: Thu Mar 19, 2020 9:10 pm
- Has thanked: 86 times
- Been thanked: 693 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Have you ridden it in A mode yet?
If you are thinking of a flash then wiz have a good reputation and are without doubt the cheapest.
You'll get a 'generic' map but it will be significantly smoother than what is programmed in atm and within 1 or 2hp of a custom map.for at least 1/2 the price.
Iirc the 2019 can have a QS fitted as well if its going on track.
If you are thinking of a flash then wiz have a good reputation and are without doubt the cheapest.
You'll get a 'generic' map but it will be significantly smoother than what is programmed in atm and within 1 or 2hp of a custom map.for at least 1/2 the price.
Iirc the 2019 can have a QS fitted as well if its going on track.
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Yes but not much mate, about 5 miles on the way back on the test ride, I spent most of the ride in Standard. I never noticed any fuelling need or requirements at all when testing, it was silky smooth, I'm not honestly sure how it can get 'smoother'Sadlonelygit wrote: ↑Sun Jun 21, 2020 10:46 am Have you ridden it in A mode yet?
If you are thinking of a flash then wiz have a good reputation and are without doubt the cheapest.
You'll get a 'generic' map but it will be significantly smoother than what is programmed in atm and within 1 or 2hp of a custom map.for at least 1/2 the price.
Iirc the 2019 can have a QS fitted as well if its going on track.
Correct me if i'm wrong but the QS needs the additional hardware too ? like this ?
http://www.woolichracing.co.uk/products ... shing.aspx
I know that's listed for 16-17... so not sure if it's the same for the 19... Or can it just be 'enabled' on the 19 ?
https://www.partzilla.com/product/yamah ... 81A0-V0-00
Looks like that may be the kit, but not yet seeing for the XSR, but may just be that this one works...
-
- Posts: 5005
- Joined: Mon Mar 16, 2020 3:39 pm
- Has thanked: 4366 times
- Been thanked: 2856 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Fair point. Its been ages since I was on track, but thinking back to Snetterton and getting overtaken by S1000s and RSV4s....yeah 120bhp ain't much is it.
- KungFooBob
- Posts: 14225
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7543 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
A mid noughties Supersport 600 will only be a few bhp down, but weigh less and handle better, Mrs Weeksy's newer ZX6 should annihilate itSupermofo wrote: ↑Sun Jun 21, 2020 11:20 amFair point. Its been ages since I was on track, but thinking back to Snetterton and getting overtaken by S1000s and RSV4s....yeah 120bhp ain't much is it.
But that's not what it's all about.
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
not in performance it won't, the 2010 zx6R is 115bhp, so very similar. Of course there's wind/aero stuff, but in performance there's very little in it.KungFooBob wrote: ↑Sun Jun 21, 2020 11:26 amA mid noughties Supersport 600 will only be a few bhp down, but weigh less and handle better, Mrs Weeksy's newer ZX6 should annihilate it
But that's not what it's all about.
https://www.motorcyclenews.com/bike-rev ... x-6r/2009/
-
- Posts: 11236
- Joined: Mon Mar 16, 2020 6:40 pm
- Location: The road of many manky motorcycles
- Has thanked: 607 times
- Been thanked: 4125 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Enjoy your new bike, can you get something to cover those metal plates near the back of the seat?
Honda Owner
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
No idea at this stage, answer is, probably.Julian_Boolean wrote: ↑Sun Jun 21, 2020 12:11 pm Enjoy your new bike, can you get something to cover those metal plates near the back of the seat?
Until it arrives and I spend more time with it and see what I like, don't, etc I'm not going to go crazy. We'll see after the first week what aesthetic changes happen.
First is shock which is on the way, then a radiator guard which is also on the way, the rest, dunno
-
- Posts: 963
- Joined: Thu Mar 19, 2020 9:10 pm
- Has thanked: 86 times
- Been thanked: 693 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
My knowledge of the QS is limited as i have a 16 which doesn't have the pnp facility of the newer bikes.
Iirc the wiring and ecu bits are all there so all you have to do is buy and fit the sensor arm.........possibly.
Youtube is your friend here i think.
Iirc the wiring and ecu bits are all there so all you have to do is buy and fit the sensor arm.........possibly.
Youtube is your friend here i think.
- Dodgy69
- Posts: 5473
- Joined: Mon Mar 16, 2020 6:36 pm
- Location: Shrewsbury
- Has thanked: 1751 times
- Been thanked: 2089 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Probably the same...the tracer has 3 engine modes. I'm always in standard on the road. B is too delayed, slow pick up, A is too aggressive for slow, town riding. Turn at traffic light, over a little bump and the bike jumps, too sensitive. Standard is about right. A for track is ok.
Motor is great on road or track. Plenty to keep you entertained, likes a good revving.
Motor is great on road or track. Plenty to keep you entertained, likes a good revving.
Yamaha rocket 3
-
- Posts: 963
- Joined: Thu Mar 19, 2020 9:10 pm
- Has thanked: 86 times
- Been thanked: 693 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Having owned a supersports 600 with 110 odd hp, the xsr has an abundance of low end torque whereas a 600 doesnt do anything until 8-9k. I know I'd rather have the extra cc every timeKungFooBob wrote: ↑Sun Jun 21, 2020 11:26 amA mid noughties Supersport 600 will only be a few bhp down, but weigh less and handle better, Mrs Weeksy's newer ZX6 should annihilate it
But that's not what it's all about.
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Got a few not very exciting bits ordered, plus hopefully one slightly more exciting bit.
Paddock stand bobbins
Radiator guard
Heel guard rub cover thing
MT-09/R1 Quickshifter.
Paddock stand bobbins
Radiator guard
Heel guard rub cover thing
MT-09/R1 Quickshifter.
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
put in what i thought was a pretty cheeky offer... but was accepted and on it's way
QS by Steve Weeks, on Flickr
QS by Steve Weeks, on Flickr
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
I'm having a doubt currently as i've just checked and it's upshift only.... Doesn't that get confusing just having it 1 way ? Is there any real point ?
- G.P
- Posts: 1944
- Joined: Sun Mar 15, 2020 9:12 pm
- Location: Wiltshire
- Has thanked: 2029 times
- Been thanked: 1310 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
It hasn't got a slipper clutch though has it?
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Yeah of course it has But you still need to use the clutch on way down, just don't need to blip (unless you want to of course)
I just thought it may get a bit confusing using the throttle only on way up but then needing the clutch on the way down.
- Yorick
- Posts: 16756
- Joined: Sat Mar 14, 2020 8:20 pm
- Location: Paradise
- Has thanked: 10280 times
- Been thanked: 6892 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
Just like normal really. I never use clutch changing up.
- KungFooBob
- Posts: 14225
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7543 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
I only generally use the clutch going up from first to second, then its clutchless all the way up to top. Just back off the throttle a teeny bit, snick it up a gear and wind it back on.
Not as quick as a QS, what with the feathering of the throttle, etc.. but essential if you take a pillion, imho, smooths the whole gear change process out.
Always use the clutch going down, with a nice little blip of the throttle, if it needs it or not
Not as quick as a QS, what with the feathering of the throttle, etc.. but essential if you take a pillion, imho, smooths the whole gear change process out.
Always use the clutch going down, with a nice little blip of the throttle, if it needs it or not
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
I always use I both up and down. Admittedly on the 790 I didn't as it had QS and blipper.
Still debating the QS, both from a value for money and a mechanical sympathy perspective
Still debating the QS, both from a value for money and a mechanical sympathy perspective
- KungFooBob
- Posts: 14225
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7543 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
I've never had a QS, I've heard too many horror stories about 3rd party ones breaking gearboxes, however if a QS is a factory option and the gearbox was designed with one in mind I'd probably go for it. Even if I didn't use it all the time, just for pub bragging rights, etc..
-
- Posts: 2528
- Joined: Mon Mar 16, 2020 7:37 pm
- Location: Layer-de-la-Haye
- Has thanked: 2249 times
- Been thanked: 1243 times
Re: Happy new bike day.... WTF, what do you mean it's a Yamaha ???
May be worth a chat with all-round Yamaha legend Phil Seton? He's very clued up on Yamaha and their tech....