GSXS 1000 - Mofo's Gixxus

Discussions and updates on your new bike, your new build, your wishes, wants and desires
Le_Fromage_Grande
Posts: 11277
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 610 times
Been thanked: 4152 times

Re: GSXS 1000 - Mofo's Gixxus

Post by Le_Fromage_Grande »

Did about 100 miles this morning, left about 05:30, home about 07:30, Ipswich - Beccles - Bungay - Ipswich, roads were nice and quiet, had breakfast at Beccles
Supermofo
Posts: 5055
Joined: Mon Mar 16, 2020 3:39 pm
Has thanked: 4427 times
Been thanked: 2891 times

Re: GSXS 1000 - Mofo's Gixxus

Post by Supermofo »

Le_Fromage_Grande wrote: Fri Aug 02, 2024 6:07 pm
Supermofo wrote: Fri Aug 02, 2024 5:56 pm Maybe miss it out then, just do Manningtree and then go north west from there
If you go from Manningtree to Harwich there are two good roads, the back way through Ramsey (tight and twisty) and the main road to Horsley Cross (wide sweeping bends).

You could go Mannigtree, Harwich, Walton/Frinton/Clacton and then use the A120 to get back to the A12, if you go through Thorpe Le Soken watch out for the huge pot holes in the High Street.
experience.
Cheers for that, having a look at the map I reckon I'll come in via Heybridge, cut under Colchester, down on the b roads towards St Osyth, left to Thorpe Le Soken and follow the twisty road towards Harwich, cut left again before Harwich proper and take the Ramsey road to Manningtree :thumbup:

Did think of doing the coast road but looks dead straight and presumably will be busier.

After a stop in Manningtree I'll decide where next, probably stick with the plan of Hadleigh/Sudbury
Le_Fromage_Grande
Posts: 11277
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 610 times
Been thanked: 4152 times

Re: GSXS 1000 - Mofo's Gixxus

Post by Le_Fromage_Grande »

Did you get a mushroom in your puncture or have you still got the plug in it?
Only asking because I had to pull the nail out of mine today, you could hear the air hissing out, turned out to be a 3 inch nail, put a plug in, which appears to be holding air.
Supermofo
Posts: 5055
Joined: Mon Mar 16, 2020 3:39 pm
Has thanked: 4427 times
Been thanked: 2891 times

Re: GSXS 1000 - Mofo's Gixxus

Post by Supermofo »

Le_Fromage_Grande wrote: Sun Oct 13, 2024 8:52 pm Did you get a mushroom in your puncture or have you still got the plug in it?
Only asking because I had to pull the nail out of mine today, you could hear the air hissing out, turned out to be a 3 inch nail, put a plug in, which appears to be holding air.
I've still got the sticky plug in it that the AA put in. Seems to be holding up fine. Bike had been sitting almost a month since I last checked pressures as only ridden it once I think till yesterday. Both front and back needed 2 psi so I think the plug is still doing it's job fine. I've done a fair mileage since the puncture. Didn't see the point in shelling out for a proper plug as I'm going to get new tyres in spring.
Supermofo
Posts: 5055
Joined: Mon Mar 16, 2020 3:39 pm
Has thanked: 4427 times
Been thanked: 2891 times

Re: GSXS 1000 - Mofo's Gixxus

Post by Supermofo »

You may recall back in April I was a twat and let my seat fall off the side causing a small split in the vinyl. Been searching for a 2nd hand seat since. All the ones I've found are pretty poor condition or fairly pricey. Then the other week I read on the GSXS forum that the later 21 onwards model (face-lift) seat fits, including the cosmetic upgrade seat. An OE seat for mine is £186! This is a new 2021 upgrade seat from a Suzuki dealer for £130.
It's a tighter fit than standard but in some ways is better as the OE seat left a gap between the front and rear seats, whereas this is now gone. Think fit at the front is fine.
Seat itself is made from...something that looks a bit leather ish. Looks nice I think and has a GSXS logo embossed on it. Was worried the red stitching would clash with the blue but the 'S' in GSXS is in red so think it works. I like it, and it's a Suzuki part.
I had planned to get the OE seat turned into a comfort seat for longer trips but will see how this is first. On the GSXS forum some people say this is more comfy than the OE seat.

OE seat
Image

New seat

Image

Image

In other news I washed it the other week ready for hibernation, hence the missing belly pan. I'm still planning on giving the underneath of the engine and the cat a good going over with GT85 before replacing the belly pan.

Battery got removed whilst I was faffing with the seat so that's in the house now for winter charging.

Winter plans are to fit the exhaust end cap I bought back in May!! To replace the damaged one. And fit the R&G radiator guard. Had this a while but waited till the bike was clean first.

And thats it I think till Spring :angry-cussingblack:
User avatar
ChrisW
Posts: 2801
Joined: Thu Feb 10, 2022 8:46 pm
Has thanked: 3003 times
Been thanked: 2115 times

Re: GSXS 1000 - Mofo's Gixxus

Post by ChrisW »

Looks even better than the original seat.
User avatar
Skub
Posts: 12346
Joined: Mon Mar 16, 2020 5:32 pm
Location: Norn Iron
Has thanked: 10045 times
Been thanked: 10360 times

Re: GSXS 1000 - Mofo's Gixxus

Post by Skub »

Jolly spiffing old bean. 8-)
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Le_Fromage_Grande
Posts: 11277
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 610 times
Been thanked: 4152 times

Re: GSXS 1000 - Mofo's Gixxus

Post by Le_Fromage_Grande »

The seat looks better than the original
User avatar
mangocrazy
Posts: 7105
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2466 times
Been thanked: 3769 times

Re: GSXS 1000 - Mofo's Gixxus

Post by mangocrazy »

The new seat is definitely a visual improvement over the original. If it's comfier as well I'd say that's a result!
There is no cloud, just somebody else's computer.