One bike you were glad to see the back of....
-
- Posts: 939
- Joined: Sun Mar 15, 2020 7:00 pm
- Location: East of West
- Has thanked: 734 times
- Been thanked: 716 times
One bike you were glad to see the back of....
Reading the opposite to this post got me thinking about the bike I was glad to be rid of.
My 1200xc Harley Davidson. Bought new from Warrs south of the water and as I drove home I'm already thinking "I will like this. I have to like this"
I added some farkels to make it my own. Road it often and attempted to become a Harley owner, but after a bit past 1100 miles, too many problems and a roasted right leg, enough was enough.
Sold in part exchange for a CBR 650 R.
My daughter also had an 883. Endless problems.
Never again.
My 1200xc Harley Davidson. Bought new from Warrs south of the water and as I drove home I'm already thinking "I will like this. I have to like this"
I added some farkels to make it my own. Road it often and attempted to become a Harley owner, but after a bit past 1100 miles, too many problems and a roasted right leg, enough was enough.
Sold in part exchange for a CBR 650 R.
My daughter also had an 883. Endless problems.
Never again.
Re: One bike you were glad to see the back of....
XS250 slow, dangerous lack of ground clearance, zero character. It was a blessing when I buried it in the side of a Skoda driven by a myopic muppet who threw a U turn out of nowhere on a dual carriageway. Still got the scars but it was worth it.
-
- Posts: 3028
- Joined: Mon Mar 16, 2020 9:30 pm
- Location: Less that 50 miles away from Moscow, but which one?
- Has thanked: 1346 times
- Been thanked: 1722 times
Re: One bike you were glad to see the back of....
CB 125 TDJ twin.
It always felt like it needed to be more on the power when cornering, it didn't have any more power so the front end never felt right.
Plus it drank oil.
It always felt like it needed to be more on the power when cornering, it didn't have any more power so the front end never felt right.
Plus it drank oil.
- DefTrap
- Posts: 4495
- Joined: Tue Apr 14, 2020 8:23 am
- Has thanked: 2259 times
- Been thanked: 2191 times
Re: One bike you were glad to see the back of....
Ducati 750 monster. Slightly customised. Bought cheaply as a non runner and fixed cheaply with new battery and plugs. Beautiful to look at.
Dead boring.
Dead boring.
-
- Posts: 1804
- Joined: Wed Mar 18, 2020 5:55 pm
- Has thanked: 3254 times
- Been thanked: 1737 times
Re: One bike you were glad to see the back of....
Kawasaki Z650,in fairness the bike had more than 10 previous owners but it was easter & I needed a bike.I managed a trip to Assen on it with no drama's but it cost me more in oil than petrol riding it back from Barcelona a couple of years later,prior to that it tried to self combust in the middle of Barcelona when the fuel tap sprung a leak & pissed petrol all over the cylinder head .Seeing as I managed to ride the bike home I rebuilt it,a failed valve stem oil seal caused the oil leak,then a few months later one of the spark plugs went loose & it needed a helicoil.At that point I gave it away to one of my mates.
I look at it as a learning experience,the main lesson being 'don't buy a bike that's obviously been neglected' I was glad to see the back of that one.
I look at it as a learning experience,the main lesson being 'don't buy a bike that's obviously been neglected' I was glad to see the back of that one.
Re: One bike you were glad to see the back of....
The Honda Africa Twin that I had for a few weeks as a courtesy bike. Truth be told, I was quite looking forward to it but it turned out to be surprisingly gutless and vibratory low down (I was really expecting more flexibility from an 1100). It was slightly more refined at higher revs but even at motorway speeds it was never exactly smooth.
It was also too wide for effective filtering in town and the splayed bars made my shoulders ache. The footrests seemed perfectly placed to catch my shins when paddling the bike into parking spaces where, being side-stand only, it took up far too much room. It seemed to be utterly shit for any purpose and all in all, it started to feel as if every aspect of the bike was specifically designed to annoy me.
I couldn't wait to hand it back.
It was also too wide for effective filtering in town and the splayed bars made my shoulders ache. The footrests seemed perfectly placed to catch my shins when paddling the bike into parking spaces where, being side-stand only, it took up far too much room. It seemed to be utterly shit for any purpose and all in all, it started to feel as if every aspect of the bike was specifically designed to annoy me.
I couldn't wait to hand it back.
-
- Posts: 11233
- Joined: Mon Mar 16, 2020 6:40 pm
- Location: The road of many manky motorcycles
- Has thanked: 607 times
- Been thanked: 4124 times
Re: One bike you were glad to see the back of....
My Husky 610, what started as a love affair with a sweet handling, fun bike ended as being glad to see the back of the slow, self destructing lump.
- Pirahna
- Posts: 1945
- Joined: Wed Mar 25, 2020 7:31 pm
- Has thanked: 1814 times
- Been thanked: 1164 times
Re: One bike you were glad to see the back of....
600 Bandit, 900 Hornet, CB1000R, I really don't like naked inline fours.
CBR600, I don't like 600 fours.
CBR600, I don't like 600 fours.
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Re: One bike you were glad to see the back of....
The only one I can think of was a loaner: A R1200C Montauk (IIRC) that I had for a couple of days while one of my Rocksters (1 or 2) was in for a dealer-service.
The bike itself was ok, but the riding position was absolutely crippling, I barely made it the half-hour journey home and ignored it for two days until I could give it back (I used something else to commute on in the meantime). Hateful thing, how anyone rides in that position for more than ten minutes I will never understand.
The bike itself was ok, but the riding position was absolutely crippling, I barely made it the half-hour journey home and ignored it for two days until I could give it back (I used something else to commute on in the meantime). Hateful thing, how anyone rides in that position for more than ten minutes I will never understand.
non quod, sed quomodo
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2869 times
- Been thanked: 554 times
Re: One bike you were glad to see the back of....
My second TDM850 4TX. My first one was superb, the second was the complete opposite. Left stranded multiple times because of faulty alarm, dodgy ignition coils, plug leads and constant arcing to the frame in wet weather, the shock snapped, an exhaust valve burned out, final straw was the fuel pump failing and the engine almost hydro-locking.
It's still on the road as far as I'm aware.
It's still on the road as far as I'm aware.
- gremlin
- Posts: 5927
- Joined: Wed Jul 08, 2020 3:12 pm
- Location: Kent (AKA God's own country)
- Has thanked: 808 times
- Been thanked: 4793 times
Re: One bike you were glad to see the back of....
Aprilia 750 Shiver.
Just the worst build quality of anything I have ever owned.
Just the worst build quality of anything I have ever owned.
All aboard the Peckham Pigeon! All aboard!
-
- Posts: 1151
- Joined: Sat Mar 14, 2020 9:28 pm
- Has thanked: 615 times
- Been thanked: 405 times
Re: One bike you were glad to see the back of....
I had an Aprilia Caponord 1000 which pretty much went wrong all the time. I got rid of it.
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2869 times
- Been thanked: 554 times
Re: One bike you were glad to see the back of....
Was it a 1st gen or 2nd gen out of interest?MyLittleStudPony wrote: ↑Mon Sep 30, 2024 7:07 pm I had an Aprilia Caponord 1000 which pretty much went wrong all the time. I got rid of it.
I've had a 2nd gen late-2007 model since March 2019, been utterly reliable since I got it until a month ago when the reg/rec failed (causing the bike to die in the Blackwall Tunnel), the dash failed due to a worn out capacitor and now one of the rear ignition coils has failed. I think/hope I've just been unlucky to have all three happen at the same time.
- Taipan
- Posts: 13945
- Joined: Sat Mar 14, 2020 1:48 pm
- Location: Essex Riviera!
- Has thanked: 15949 times
- Been thanked: 10243 times
Re: One bike you were glad to see the back of....
KTM 640 LC4. An absolute piece of shit with no redeeming features at all. Worse bike i've ever owned.
-
- Posts: 1151
- Joined: Sat Mar 14, 2020 9:28 pm
- Has thanked: 615 times
- Been thanked: 405 times
Re: One bike you were glad to see the back of....
1st generation.Beancounter wrote: ↑Tue Oct 01, 2024 4:29 pmWas it a 1st gen or 2nd gen out of interest?MyLittleStudPony wrote: ↑Mon Sep 30, 2024 7:07 pm I had an Aprilia Caponord 1000 which pretty much went wrong all the time. I got rid of it.
I've had a 2nd gen late-2007 model since March 2019, been utterly reliable since I got it until a month ago when the reg/rec failed (causing the bike to die in the Blackwall Tunnel), the dash failed due to a worn out capacitor and now one of the rear ignition coils has failed. I think/hope I've just been unlucky to have all three happen at the same time.
-
- Posts: 4999
- Joined: Mon Mar 16, 2020 3:39 pm
- Has thanked: 4359 times
- Been thanked: 2850 times
Re: One bike you were glad to see the back of....
Don't think I've had any bikes I've been glad to see the back of. Fingers crossed it stays that way!
Both my TZR 125 and 250 had issues but I still liked the bikes at the time I sold them.
Both my TZR 125 and 250 had issues but I still liked the bikes at the time I sold them.
-
- Posts: 954
- Joined: Thu Mar 19, 2020 9:10 pm
- Has thanked: 85 times
- Been thanked: 688 times
Re: One bike you were glad to see the back of....
DittoLe_Fromage_Grande wrote: ↑Sun Sep 29, 2024 9:26 pm My Husky 610, what started as a love affair with a sweet handling, fun bike ended as being glad to see the back of the slow, self destructing lump.
- Scotsrich
- Posts: 793
- Joined: Thu Mar 19, 2020 10:46 am
- Location: East Lothian
- Has thanked: 70 times
- Been thanked: 549 times
Re: One bike you were glad to see the back of....
Nothing really against the bike but my ZZR1100.
I moved house and it got stuck round the back under a cover. It was a royal PITA to get it out so basically didn't move for about 3 years.
I made a vain attempt to put it back on the road, even putting in a new radiator. I got the brakes freed off but not quite good enough for my liking so I stuck it on the ZZR Facebook page for 500 quid. I could have got more for it if I could have been bothered to get it MOT'd, it even had full luggage but I just wanted shot.
I had bought it to replace my written off previous one which had a lot of goodies on intending to transfer all of them over. Well that never got done, I really shouldn't have bought it in the first place.
I moved house and it got stuck round the back under a cover. It was a royal PITA to get it out so basically didn't move for about 3 years.
I made a vain attempt to put it back on the road, even putting in a new radiator. I got the brakes freed off but not quite good enough for my liking so I stuck it on the ZZR Facebook page for 500 quid. I could have got more for it if I could have been bothered to get it MOT'd, it even had full luggage but I just wanted shot.
I had bought it to replace my written off previous one which had a lot of goodies on intending to transfer all of them over. Well that never got done, I really shouldn't have bought it in the first place.
-
- Posts: 4096
- Joined: Mon Mar 16, 2020 6:17 pm
- Has thanked: 2635 times
- Been thanked: 1523 times
Re: One bike you were glad to see the back of....
1994 BMW 650 Funduro... as I was the newly minted instructor, I got the bike lurking at the back of the lock-up.
I'd heard a lot of good things about it (from bike mags I realised later). It was horrible. Far too tall - I had to find high kerbs to get on and off, and I'm 5'9 so fairly average height. It vibrated. And the limited rev range - it wouldn't pull below 3k and ran out of revs at 6 - couldn't cope with a five speed box. There was one gear choice only for any particular road speed and trying to maintain an indicated 40 mph was either revving the nuts off it in 2nd or just out the bottom of the engine's ability to pull cleanly in 3rd.
There was also a 750 Trident at the site and that was only marginally better.
As soon as it was available, I grabbed a GPZ500 - lovely to ride by comparison.
I'd heard a lot of good things about it (from bike mags I realised later). It was horrible. Far too tall - I had to find high kerbs to get on and off, and I'm 5'9 so fairly average height. It vibrated. And the limited rev range - it wouldn't pull below 3k and ran out of revs at 6 - couldn't cope with a five speed box. There was one gear choice only for any particular road speed and trying to maintain an indicated 40 mph was either revving the nuts off it in 2nd or just out the bottom of the engine's ability to pull cleanly in 3rd.
There was also a 750 Trident at the site and that was only marginally better.
As soon as it was available, I grabbed a GPZ500 - lovely to ride by comparison.
"If a man does not keep pace with his companions, perhaps it is because he hears a different drummer." Henry David Thoreau
www.ko-fi.com/survivalskills www.survivalskillsridertraining.co.uk www.facebook.com/survivalskills
www.ko-fi.com/survivalskills www.survivalskillsridertraining.co.uk www.facebook.com/survivalskills
- Taipan
- Posts: 13945
- Joined: Sat Mar 14, 2020 1:48 pm
- Location: Essex Riviera!
- Has thanked: 15949 times
- Been thanked: 10243 times
Re: One bike you were glad to see the back of....
I had a Funduro as a loan bike from Brackens KTM whilst they were fixing the engine on my LC4. I think I actually disliked it more than the LC4 at the time! I recall it as a horrible, slow turning, gutless slug of a thing! Its only redeeming feature was it made me briefly like the LC4!