Spot the issue here?

Tips, tricks, questions and answers to tech questions
Sadlonelygit
Posts: 997
Joined: Thu Mar 19, 2020 9:10 pm
Has thanked: 86 times
Been thanked: 715 times

Spot the issue here?

Post by Sadlonelygit »

No clues, let's see who agrees with me!
IMG_20240514_202834.jpg
IMG_20240514_202834.jpg (607.05 KiB) Viewed 1489 times
Top
User avatar
KungFooBob
Posts: 14309
Joined: Sat Mar 14, 2020 1:04 pm
Location: The content of this post is not AI generated.
Has thanked: 541 times
Been thanked: 7594 times

Re: Spot the issue here?

Post by KungFooBob »

The gauge isn't perpendicular to the tyre?
Top
User avatar
MrLongbeard
Posts: 4633
Joined: Sun Mar 15, 2020 2:06 pm
Has thanked: 604 times
Been thanked: 2470 times

Re: Spot the issue here?

Post by MrLongbeard »

Fingers nails could do with a trim
Top
User avatar
mangocrazy
Posts: 6984
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2415 times
Been thanked: 3659 times

Re: Spot the issue here?

Post by mangocrazy »

Upside down the digital readout says EOL - End Of Life.
There is no cloud, just somebody else's computer.
Top
User avatar
MrLongbeard
Posts: 4633
Joined: Sun Mar 15, 2020 2:06 pm
Has thanked: 604 times
Been thanked: 2470 times

Re: Spot the issue here?

Post by MrLongbeard »

Those bricks three rows down look a little close together
Top
Nobby
Posts: 537
Joined: Sun Mar 15, 2020 5:04 pm
Has thanked: 88 times
Been thanked: 483 times

Re: Spot the issue here?

Post by Nobby »

That wall behind you needs repointing
Top
Sadlonelygit
Posts: 997
Joined: Thu Mar 19, 2020 9:10 pm
Has thanked: 86 times
Been thanked: 715 times

Re: Spot the issue here?

Post by Sadlonelygit »

Let's be clear, that's not me or my tyre!
Top
v8-powered
Posts: 2531
Joined: Mon Mar 16, 2020 7:37 pm
Location: Layer-de-la-Haye
Has thanked: 2258 times
Been thanked: 1245 times

Re: Spot the issue here?

Post by v8-powered »

Vernier and gauge displaying different figures
Top
User avatar
Rockburner
Posts: 4404
Joined: Sun Mar 15, 2020 11:06 am
Location: Hiding in your blind spot
Has thanked: 7853 times
Been thanked: 2555 times

Re: Spot the issue here?

Post by Rockburner »

v8-powered wrote: ↑Wed May 15, 2024 9:00 am Vernier and gauge displaying different figures
I put that down to the angle - the device is leaning back relative to the plane of the photo so part of the markings are going to be hidden by the 3-dimensional nature of the device.
non quod, sed quomodo
Top
User avatar
MrLongbeard
Posts: 4633
Joined: Sun Mar 15, 2020 2:06 pm
Has thanked: 604 times
Been thanked: 2470 times

Re: Spot the issue here?

Post by MrLongbeard »

Rockburner wrote: ↑Wed May 15, 2024 9:28 am
v8-powered wrote: ↑Wed May 15, 2024 9:00 am Vernier and gauge displaying different figures
I put that down to the angle - the device is leaning back relative to the plane of the photo so part of the markings are going to be hidden by the 3-dimensional nature of the device.
Same, you can see the 9mm mark, so given the angle it would probably be around the 7.5 - 8mm mark truly showing.
Top
Mr. Dazzle
Posts: 14068
Joined: Mon Mar 16, 2020 7:57 pm
Location: Milton Keynes
Has thanked: 2572 times
Been thanked: 6300 times

Re: Spot the issue here?

Post by Mr. Dazzle »

Don't believe that's a very near scale anyway, although I'm never entirely sure what counts :D
Top
Sadlonelygit
Posts: 997
Joined: Thu Mar 19, 2020 9:10 pm
Has thanked: 86 times
Been thanked: 715 times

Re: Spot the issue here?

Post by Sadlonelygit »

No one noticed that those tyres have been re-cut then!
Top
User avatar
Skub
Posts: 12237
Joined: Mon Mar 16, 2020 5:32 pm
Location: Norn Iron
Has thanked: 9901 times
Been thanked: 10212 times

Re: Spot the issue here?

Post by Skub »

Sadlonelygit wrote: ↑Thu May 16, 2024 7:50 pm No one noticed that those tyres have been re-cut then!
Certainly not me!
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Top
Mr. Dazzle
Posts: 14068
Joined: Mon Mar 16, 2020 7:57 pm
Location: Milton Keynes
Has thanked: 2572 times
Been thanked: 6300 times

Re: Spot the issue here?

Post by Mr. Dazzle »

Reduce, re-use, recycle :thumbup:
Top
User avatar
mangocrazy
Posts: 6984
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2415 times
Been thanked: 3659 times

Re: Spot the issue here?

Post by mangocrazy »

Sadlonelygit wrote: ↑Thu May 16, 2024 7:50 pm No one noticed that those tyres have been re-cut then!
So I wasn't actually too far out, then?
mangocrazy wrote: ↑Tue May 14, 2024 7:39 pm Upside down the digital readout says EOL - End Of Life.
There is no cloud, just somebody else's computer.
Top
Le_Fromage_Grande
Posts: 11243
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 609 times
Been thanked: 4133 times

Re: Spot the issue here?

Post by Le_Fromage_Grande »

Sadlonelygit wrote: ↑Thu May 16, 2024 7:50 pm No one noticed that those tyres have been re-cut then!
Yeah I noticed it, I assumed they're truck tyres
Top
Wossname
Posts: 925
Joined: Fri Apr 10, 2020 7:14 pm
Location: West of the Tamar
Has thanked: 235 times
Been thanked: 577 times

Re: Spot the issue here?

Post by Wossname »

The slidy scale is on upside down.
Top
Wossname
Posts: 925
Joined: Fri Apr 10, 2020 7:14 pm
Location: West of the Tamar
Has thanked: 235 times
Been thanked: 577 times

Re: Spot the issue here?

Post by Wossname »

…. And the more I look at it - someone’s got an enormous index finger!😄
Top
Mussels
Posts: 4447
Joined: Mon Mar 16, 2020 9:02 pm
Has thanked: 840 times
Been thanked: 1242 times

Re: Spot the issue here?

Post by Mussels »

Wossname wrote: ↑Sat May 18, 2024 6:48 pm …. And the more I look at it - someone’s got an enormous index finger!😄
And a very happy wife.
Top

Return to “Mechanics, spanners, twiddling and twirling tools”