The Official Pleasing Purchase Thread

General chat topics, anything and everything you want or need to discuss
636mick
Posts: 945
Joined: Mon Mar 16, 2020 10:34 am
Location: In my village
Has thanked: 1079 times
Been thanked: 721 times

Re: The Official Pleasing Purchase Thread

Post by 636mick »

Scotsrich wrote: Thu Jan 19, 2023 9:14 am One of the most unexciting probably but a game changer.

No more waiting for the few minutes where coffee is at the right temperature between scalding hot and too cool, this keep my cuppa drinkable for a couple of hours.
EE0F8A67-4943-4742-9E69-B1D2E987FC39.jpeg
My youngest got me the exact same one for Xmas, used in anger the other day, at an incident scene for 4 hours, minus 6 up to around freezing. Kept my tea hot for most of that time. In fact too hot to drink for the fist 45 minutes. Only issue I’ve got, it won’t fit the cup holders in my own or my work BMW!! Who cares what it tasted like if it’s hot and wet.
Mick
User avatar
MrLongbeard
Posts: 4594
Joined: Sun Mar 15, 2020 2:06 pm
Has thanked: 599 times
Been thanked: 2448 times

Re: The Official Pleasing Purchase Thread

Post by MrLongbeard »

500ml of nicotine.
cheb
Posts: 4908
Joined: Tue Mar 17, 2020 6:51 am
Been thanked: 2618 times

Re: The Official Pleasing Purchase Thread

Post by cheb »

A cheap Makita battery compatible mini chainsaw for about £25. What could possibly go wrong?
User avatar
Horse
Posts: 11558
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 6196 times
Been thanked: 5088 times

Re: The Official Pleasing Purchase Thread

Post by Horse »

636mick wrote: Tue Jan 24, 2023 1:21 pm used in anger the other day, at an incident scene for 4 hours. Kept my tea hot for most of that time.


Only issue I’ve got ...
... Is a full bladder and no portapotty on scene?
Even bland can be a type of character :wave:
User avatar
MrLongbeard
Posts: 4594
Joined: Sun Mar 15, 2020 2:06 pm
Has thanked: 599 times
Been thanked: 2448 times

Re: The Official Pleasing Purchase Thread

Post by MrLongbeard »

Image
Demannu
Posts: 1882
Joined: Sat May 08, 2021 5:14 pm
Location: Another day without using algebra
Has thanked: 65 times
Been thanked: 1235 times

Re: The Official Pleasing Purchase Thread

Post by Demannu »

Bought a pair of furygan trousers off marketplace for less than a pair of knee sliders.
Fit is a bit snug atm, but should be a good fit once the exercise starts again!
User avatar
Mr Moofo
Posts: 4620
Joined: Sat Mar 14, 2020 1:41 pm
Location: Brightonish
Has thanked: 1829 times
Been thanked: 1469 times

Re: The Official Pleasing Purchase Thread

Post by Mr Moofo »

ZRX61 wrote: Sat Jan 21, 2023 12:52 am Welp.. Celestron Skymasters showed up...

Phone attach gizmo isn't worth a spoon of spit. Protective lens caps fall off just by picking up the binocs. Floppy storage bag is bit cheap (quality-wise), but a hard shell doodad is cheap (price-wise). Woman in the next street over just had a shower.
I have some of those - I can see fuck all through them !
cheb
Posts: 4908
Joined: Tue Mar 17, 2020 6:51 am
Been thanked: 2618 times

Re: The Official Pleasing Purchase Thread

Post by cheb »

cheb wrote: Wed Feb 01, 2023 9:46 pm A cheap Makita battery compatible mini chainsaw for about £25. What could possibly go wrong?

It's arrived and is surprisingly good, it whizzes through pallet slats.
User avatar
Taipan
Posts: 13951
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15964 times
Been thanked: 10249 times

Re: The Official Pleasing Purchase Thread

Post by Taipan »

cheb wrote: Thu Feb 02, 2023 4:35 pm
cheb wrote: Wed Feb 01, 2023 9:46 pm A cheap Makita battery compatible mini chainsaw for about £25. What could possibly go wrong?

It's arrived and is surprisingly good, it whizzes through pallet slats.
Got a link to it please?
User avatar
ZRX61
Posts: 5164
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 1508 times
Been thanked: 1414 times

Re: The Official Pleasing Purchase Thread

Post by ZRX61 »

A small Tekton tool kit for buggering about with electronic doodads.

A book about fitness for 60+ fogies...

Next up is a small pancake compressor so I can use nail guns etc around the house.
cheb
Posts: 4908
Joined: Tue Mar 17, 2020 6:51 am
Been thanked: 2618 times

Re: The Official Pleasing Purchase Thread

Post by cheb »

Taipan wrote: Thu Feb 02, 2023 4:43 pm
cheb wrote: Thu Feb 02, 2023 4:35 pm
cheb wrote: Wed Feb 01, 2023 9:46 pm A cheap Makita battery compatible mini chainsaw for about £25. What could possibly go wrong?

It's arrived and is surprisingly good, it whizzes through pallet slats.
Got a link to it please?
https://www.ebay.co.uk/itm/144902464579
User avatar
Yorick
Posts: 16750
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 10271 times
Been thanked: 6887 times

Re: The Official Pleasing Purchase Thread

Post by Yorick »

cheb wrote: Thu Feb 02, 2023 5:04 pm
Taipan wrote: Thu Feb 02, 2023 4:43 pm
cheb wrote: Thu Feb 02, 2023 4:35 pm


It's arrived and is surprisingly good, it whizzes through pallet slats.
Got a link to it please?
https://www.ebay.co.uk/itm/144902464579
What amp battery does it need?
cheb
Posts: 4908
Joined: Tue Mar 17, 2020 6:51 am
Been thanked: 2618 times

Re: The Official Pleasing Purchase Thread

Post by cheb »

I've only got 3Ah batteries but I've not run it long enough to find out how long it will last on one.
User avatar
Yorick
Posts: 16750
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 10271 times
Been thanked: 6887 times

Re: The Official Pleasing Purchase Thread

Post by Yorick »

cheb wrote: Thu Feb 02, 2023 5:16 pm I've only got 3Ah batteries but I've not run it long enough to find out how long it will last on one.
Good job I looked before I bought.
It's 21v. All mine are 18v
cheb
Posts: 4908
Joined: Tue Mar 17, 2020 6:51 am
Been thanked: 2618 times

Re: The Official Pleasing Purchase Thread

Post by cheb »

The one I linked to runs fine with a Makita 18V battery, and with a no brand 18V battery. Some makes use the higher voltage as proof it's bigger and better, the numbers of cells in the battery is the same. Also IME the motors in the tools will run on varying voltages quite happily. If the voltage is too great they run quite a lot faster, I ran a Dewalt 9.6V drill/driver on an 18V battery and it was good as a drill but even on the slowest speed it was too fast for driving screws easily. The bit tended to spin in the screw head at the slightly opportunity. The same battery in a 14.4V drill was fine for both drilling and screwing.

Think of lead acid batteries as fitted to cars and bikes, sold as 12V but when fully charged are over 13V. Stick a voltmeter across you battery terminals when it's fully charged and see what you get.
User avatar
Yorick
Posts: 16750
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 10271 times
Been thanked: 6887 times

Re: The Official Pleasing Purchase Thread

Post by Yorick »

Good stuff Chebster :)
User avatar
Taipan
Posts: 13951
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15964 times
Been thanked: 10249 times

Re: The Official Pleasing Purchase Thread

Post by Taipan »

cheb wrote: Thu Feb 02, 2023 5:16 pm I've only got 3Ah batteries but I've not run it long enough to find out how long it will last on one.
I take it that the LXT Makita batteries it takes? My old Makita drill is a different fitting to my later LXT stuff?
cheb
Posts: 4908
Joined: Tue Mar 17, 2020 6:51 am
Been thanked: 2618 times

Re: The Official Pleasing Purchase Thread

Post by cheb »

Yes, LXT batteries. You can get/craft/cobble/bodge adapters from LXT to the older Ni-cad type.

I've a picture of one I made earlier, I think I posted it on here.

Image
Last edited by cheb on Thu Feb 02, 2023 8:15 pm, edited 3 times in total.
cheb
Posts: 4908
Joined: Tue Mar 17, 2020 6:51 am
Been thanked: 2618 times

Re: The Official Pleasing Purchase Thread

Post by cheb »

That's a chopped down battery top for the connector pins screwed to an adaptor all hot glued into the drill.
User avatar
Yorick
Posts: 16750
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 10271 times
Been thanked: 6887 times

Re: The Official Pleasing Purchase Thread

Post by Yorick »

Some cheesy coasters for my bar :D
20230203_195753.jpg
20230203_195753.jpg (1.88 MiB) Viewed 325 times