KTM 1290 Superduke

Discussions and updates on your new bike, your new build, your wishes, wants and desires
User avatar
Tricky
Posts: 1819
Joined: Sat Mar 14, 2020 9:46 pm
Location: Chilterns
Has thanked: 2564 times
Been thanked: 2680 times

Re: KTM 1290 Superduke

Post by Tricky »

Hope you have a great day - the big girl will be a (big fun ) handful around there I reckon! 8-)
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

I didn't take the KTM on the track in the end, I was struggling with the Honda and just wanted to practice on that. Last time I went to Pembrey I was full of confidence but not so much this time.

Still had a great day and it was such a brilliantly organised track day. The new format of fewer bikes works really well. It used to be pretty busy but now is spot on. If I'd been more confident and gone that little bit quicker I could have gone for laps without seeing anyone.

Alan popped over and said hello a couple of times and it was good to chat to him. Lunch was excellent as always.

Front tyre pressure as recommended by bridgestone was horrible us usual and dropping 1 psi made it feel so much better. Later in the day the rear started to feel a bit greasy one the left as I got quicker but I don't really know why. The pressure (26 cold) was the same as I run elsewhere and hot I think this went up to 30-31. The left side had some weird wear patterns whereas the right was fine. It's a right handed track so maybe the left wasn't staying warm... it doesn't really feel to me like I go fast enough for this to make a difference but at the end of the day the tyre looked like this...
tyre.jpg
tyre.jpg (415.26 KiB) Viewed 640 times
Other than tyre weirdness and confidence issues it was a cracking day.

Image

Image

Image

Image

Image

Image
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

Ordered a new Hyperpro RSC steering damper for the bike today after a lot of weavery and flapping today. Mostly felt accelerating hard past cars over cats eyes but also sometimes on uneven surfaces. No really fast shaking so the standard damper was doing something but not pleasant all the same.

Got the standard damper off when I got home and there wasn't much damping going on and the oil was like water. Took it apart to rebuild with new oil but decided halfway though that I'd like something adjustable rather than guessing with oil weights.

Will post when I've received it and will report back when I've fitted it.

'Liveliest' bike I've ever ridden by some margin.
User avatar
scottyuk
Posts: 227
Joined: Sat Mar 14, 2020 6:43 pm
Has thanked: 167 times
Been thanked: 257 times

Re: KTM 1290 Superduke

Post by scottyuk »

I run a Hyper Pro RSC on my 1290GT.

I expect it to make things better when on the edge but it steadies things all the time. I did need to play with the clicker to get it where I wanted but it didn't take long to dial in.
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

Lead time is 3-4 weeks at least so having to rebuild the standard unit with heavier oil for now.
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

Rebuilt the steering damper with 15w fork oil and it’s a lot better and considerably more stable. Still not adjustable and the resistance is the same across the sweep so the steering feels a little heavier so will still wait for the hyper pro camper and fit that.

Lot of bugs around tonight.
FCF1A9EF-6CE3-41C3-A072-7CF9537467E7.jpeg
FCF1A9EF-6CE3-41C3-A072-7CF9537467E7.jpeg (404.06 KiB) Viewed 505 times
User avatar
weeksy
Site Admin
Posts: 23416
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5450 times
Been thanked: 13085 times

Re: KTM 1290 Superduke

Post by weeksy »

Road into Lambourne ?
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

weeksy wrote: Thu Jun 23, 2022 6:36 am Road into Lambourne ?
4494 to Wantage.
User avatar
weeksy
Site Admin
Posts: 23416
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5450 times
Been thanked: 13085 times

Re: KTM 1290 Superduke

Post by weeksy »

dern wrote: Thu Jun 23, 2022 7:50 am
weeksy wrote: Thu Jun 23, 2022 6:36 am Road into Lambourne ?
4494 to Wantage.
Ah, the junction of the kink/chicane.... should have got that.
User avatar
Horse
Posts: 11549
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 6187 times
Been thanked: 5087 times

Re: KTM 1290 Superduke

Post by Horse »

weeksy wrote: Thu Jun 23, 2022 7:51 am
dern wrote: Thu Jun 23, 2022 7:50 am
weeksy wrote: Thu Jun 23, 2022 6:36 am Road into Lambourne ?
4494 to Wantage.
Ah, the junction of the kink/chicane.... should have got that.
Was along there one evening doing training. Headed N towards Wantage down from the Ridgeway. Stopped in the farm entrance at the top of the hill down to the town, quick chat, turn around.

Fields (immediately SE of the photo site) were full of deer. WTF had they been hiding? Must have been in the hedges.
Even bland can be a type of character :wave:
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

The deer were starting to come out later yesterday evening so slowed right down and came home. It’s a bit of a sketchy road in the evening from that perspective. I’ve not seen any along there during the day but always aware that they’re in there somewhere.
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

Don’t have time to go out for a ride this weekend to test it but the new damper looks the part and was easy to fit.

The oe damper before I rebuilt it has less damping than the new on minimum. Rebuilt with 15w oil it’s very roughly equivalent to 3 clicks from minimum out of 22. This is moving the piston slowly.

Just sat on the bike the damping is noticeable but increases markedly when you try and shake the bars. Very clever.

095561FD-5CD5-4C04-A07E-E594C3FF0124.jpeg
095561FD-5CD5-4C04-A07E-E594C3FF0124.jpeg (342.08 KiB) Viewed 431 times
79F1C742-6B93-4BF0-B79C-AB485D8C2D3A.jpeg
79F1C742-6B93-4BF0-B79C-AB485D8C2D3A.jpeg (396.93 KiB) Viewed 431 times
Must mention the great service from Brook Suspension too.
User avatar
wull
Posts: 3065
Joined: Sun Aug 15, 2021 6:09 pm
Location: Alloa
Has thanked: 880 times
Been thanked: 1544 times

Re: KTM 1290 Superduke

Post by wull »

Bear in mind the differences when up to temperature, oil cold, warm etc etc.
User avatar
scottyuk
Posts: 227
Joined: Sat Mar 14, 2020 6:43 pm
Has thanked: 167 times
Been thanked: 257 times

Re: KTM 1290 Superduke

Post by scottyuk »

What setting do you have yours on? Mine is set in about the middle (forgot the click count). I started low and increased to the point I wanted to reduce it. It's pretty noticeable at a standstill.
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

I set it at 10 out of 22 but I haven’t ridden it yet.
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

The steering damper is great. Tried it on ten and it was very stable but you could feel quite a lot of resistance so knocked it back to eight and now it feels far better in terms of resistance and it still keeps things under control.

It’s a lot of money but the bike needs something better than the standard damper and this sorts out the problem.
User avatar
Skub
Posts: 12167
Joined: Mon Mar 16, 2020 5:32 pm
Location: Norn Iron
Has thanked: 9819 times
Been thanked: 10144 times

Re: KTM 1290 Superduke

Post by Skub »

dern wrote: Sun Jul 10, 2022 3:01 pm The steering damper is great. Tried it on ten and it was very stable but you could feel quite a lot of resistance so knocked it back to eight and now it feels far better in terms of resistance and it still keeps things under control.

It’s a lot of money but the bike needs something better than the standard damper and this sorts out the problem.
No need to justify bike stuff to us,we understand. :thumbup:
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
User avatar
dern
Posts: 2138
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1766 times

Re: KTM 1290 Superduke

Post by dern »

I bought some o2 eliminators as I read that they make the throttle transitions smoother. Went to fit them today and found that I already have some fitted so that’s irritating. Should have looked first.

So I removed them to see by how much they improve the bike and I think I prefer it without them fitted.

So now I have two sets. Brilliant.
User avatar
weeksy
Site Admin
Posts: 23416
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5450 times
Been thanked: 13085 times

Re: KTM 1290 Superduke

Post by weeksy »

Awesome lol.
User avatar
Dodgy69
Posts: 5455
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1745 times
Been thanked: 2085 times

Re: KTM 1290 Superduke

Post by Dodgy69 »

If I was you...I'd keep 1290..keep 1190..keep blade. Perfect little family. 👍
Yamaha rocket 3