Page 1 of 1
Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 3:07 pm
by formula400
Right, currently putting on new grips
How on gods green earth do I get the throttle grip on
Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 3:11 pm
by wull
Hairspray, then slide it on.
Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 4:24 pm
by Le_Fromage_Grande
Squirt loads of WD40 on the inside, slide it on, let it dry, the grip will stay on, but grip glue works better.
Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 4:29 pm
by KungFooBob
Same, but washing up liquid works for me.
If it really doesn't want to go on you might have to rub some of those knobbly bits off.
Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 4:33 pm
by wull
I used the WD40 method for years but the hairspray method is less messy, works better and goes tacky once dried.
You don’t want to really have to fart about with the raised bits as they are there to help keep the grip in place. Ideally you’d want to use some Lockwire but not essential.
Another method I’ve used in the past is by using an airline, that works well. Great for removing grips that you might want to reuse.
Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 4:58 pm
by Skub
Hairspray is my fav method.
Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 5:08 pm
by Count Steer
I suspect he's successfully done it using the hairspray method....then made a slight hash of replying to Wull's post ^^^^. All will become clear I'm sure.

Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 5:13 pm
by wull
Count Steer wrote: Sat Sep 14, 2024 5:08 pm
I suspect he's successfully done it using the hairspray method....then made a slight hash of replying to Wull's post ^^^^. All will become clear I'm sure.
Either that or the wife has went tits wondering where her hairspray has gone


Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 5:28 pm
by Count Steer
wull wrote: Sat Sep 14, 2024 5:13 pm
Count Steer wrote: Sat Sep 14, 2024 5:08 pm
I suspect he's successfully done it using the hairspray method....then made a slight hash of replying to Wull's post ^^^^. All will become clear I'm sure.
Either that or the wife has went tits wondering where her hairspray has gone

Or she's wondering why he smells a bit girly.

Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 5:53 pm
by Rockburner
KungFooBob wrote: Sat Sep 14, 2024 4:29 pm
Same, but washing up liquid works for me.
If it really doesn't want to go on you might have to rub some of those knobbly bits off.
In VERY VERY VERY small amounts!!
Do NOT slather the bar in washing up liquid, it will NEVER dry.
I caught my father doing the above on the JAPton 30 years ago and gave him a bollocking for it... The grip is STILL slipping on the bar now!
Re: Putting on new grips Honda CBR650r
Posted: Sat Sep 14, 2024 6:22 pm
by formula400
wull wrote: Sat Sep 14, 2024 3:11 pm
Hairspray, then slide it on.
Sorry didn’t mean to report your post.
Thanks for the help
Re: Putting on new grips Honda CBR650r
Posted: Sun Sep 15, 2024 5:41 pm
by formula400
Update
Grips went on, my helper gave the bikes some go faster stripes
Re: Putting on new grips Honda CBR650r
Posted: Sun Sep 15, 2024 5:51 pm
by Skub
formula400 wrote: Sun Sep 15, 2024 5:41 pm
Update
Grips went on, my helper gave the bikes some go faster stripes
Reminds me,some years ago a neighbour was doing some gloss painting and he took a break. Meanwhile his toddler son grabbed the can and brush and redecorated another neighbour's car.

Re: Putting on new grips Honda CBR650r
Posted: Sun Sep 15, 2024 6:57 pm
by Rockburner
formula400 wrote: Sun Sep 15, 2024 5:41 pm
Update
Grips went on, my helper gave the bikes some go faster stripes
Speedline!
Re: Putting on new grips Honda CBR650r
Posted: Sun Sep 15, 2024 7:01 pm
by KungFooBob
I got a good look at a CBR650R on Le Shuttle and there were loads of them in Fronch.
They're much more premium looking than I expected. Defo look better built than MT07s or 650 Ninjas.
I noticed that the grips on my 1200GS were looking a bit thin (it's just about to rock over 20k), I think I might put some grip puppies over them rather than replace.