revtothelimit - motorbike forum

I've made an executive decision regarding soda blasting... I was looking at getting a pukka set up from Horrible Fright, which seems like over kill.. so:

For those with long memories (VD days) a link was posted to a blog by some chap that worked on VW's who came up with a $5 (at the time) doohicky. I made one, still have it somewhere. It worked great.
Basically the plastic hose goes in a box of soda & it syphons it up owing to airflow creating vacuum:



However, I just found a fairly cheap (5x as much...) alternative on Amazon which will be here later today (& is made by a company with the unfortunate name of Wogaboo ):




While looking for a link to the original $5 soda blaster, I found instructions for a $5 sand blaster version:

https://www.instructables.com/DIY-500-Sandblaster/

The $25 version showed up... Pic above shows a 1m hose. However, the package stated 10ft...It was neither, it was 3ft & of such crap quality that it will betting upgraded/replaced with 4ft of the clear tube that has the nylon braids in it.
Pics on Amazon also showed it with 4 spare nozzles, it actually came with 5.
Will be picking up a 50lb bag of blasting soda from Horrible Fright & some of the new hose from Lowes, probably tomorrow.

Upgraded hose fitted to the blaster....
Bought 10ft of hose, the other 6ft will be used to allow the ultrasonic to drain straight into a bucket.