revtothelimit - motorbike forum

Yebbut...'they fit the end cap'...how?

(Which, I guess is the question you were asking in the first place). Surely they don't glue it on? Is it the riveted straps that just clamp it in?

Count Steer wrote: Thu Mar 24, 2022 4:36 pm Yebbut...'they fit the end cap'...how?

(Which, I guess is the question you were asking in the first place). Surely they don't glue it on? Is it the riveted straps that just clamp it in?

Yes it appears that the end cap is a stepped shape. So it slides into the sleeve until the wider step hits the end of the can sleeve, and then the rivets go through the sleeve into the end cap and hold it there, iyswim?

Taipan wrote: Thu Mar 24, 2022 4:45 pm

Count Steer wrote: Thu Mar 24, 2022 4:36 pm Yebbut...'they fit the end cap'...how?

(Which, I guess is the question you were asking in the first place). Surely they don't glue it on? Is it the riveted straps that just clamp it in?

Yes it appears that the end cap is a stepped shape. So it slides into the sleeve until the wider step hits the end of the can sleeve, and then the rivets go through the sleeve into the end cap and hold it there, iyswim?

Gotcha. Drilling a hole and sorting a grommet rather than drilling the eyelet rivets has to be the simplest way then eh?

Supermofo wrote: Thu Mar 24, 2022 2:51 pm Probably cheaper to get some wireless speakers hooked up playing engine noises for you and leave the exhaust alone

Bloody noisy Essex boys

Or a lollipop in the spokes.

Taipan wrote: Thu Mar 24, 2022 4:45 pm

Count Steer wrote: Thu Mar 24, 2022 4:36 pm Yebbut...'they fit the end cap'...how?

(Which, I guess is the question you were asking in the first place). Surely they don't glue it on? Is it the riveted straps that just clamp it in?

Yes it appears that the end cap is a stepped shape. So it slides into the sleeve until the wider step hits the end of the can sleeve, and then the rivets go through the sleeve into the end cap and hold it there, iyswim?

Get the proper Akra ones,sometimes the cheaper bungs melt and make a mess. Shop around on price,a tenner seems dear to me,I think I got 2 for that.
https://www.ebay.co.uk/itm/153827781884 ... SweeBhl2OI

Yorick wrote: Thu Mar 24, 2022 4:55 pm

Supermofo wrote: Thu Mar 24, 2022 2:51 pm Probably cheaper to get some wireless speakers hooked up playing engine noises for you and leave the exhaust alone

Bloody noisy Essex boys

Or a lollipop in the spokes.

Playing cards iffin you don't mind!

Taipan wrote: Thu Mar 24, 2022 7:09 pm

Yorick wrote: Thu Mar 24, 2022 4:55 pm

Supermofo wrote: Thu Mar 24, 2022 2:51 pm Probably cheaper to get some wireless speakers hooked up playing engine noises for you and leave the exhaust alone

Bloody noisy Essex boys

Or a lollipop in the spokes.

Playing cards iffin you don't mind!

We were posh

I'm a few days and a full tank of juice into the bike now, so what can I say or add at this point? Well, it won't be staying that's for sure. Getting on and off of it is very difficult with my knackered knee, so I guess at some point I'm just not going to be able to ride it? But, I do hope that isn't anytime soon as I've come to really like this bike!

I like anything that does what it is needed for well, and this certainly does. Very easy to ride, ridiculously so, and lovely and smooth through the traffic. I'm almost used to the riding position now and no longer feel awkward about where to put my feet and enjoy changing between the two options!

Yes, as predicted, the wide bars do hinder progress at times when filtering, but I've grown to like the comfort of them.

The seat is one of the most comfortable I've ever had on a bike and a complete contrast to the ones on the NCX which are one of the most uncomfortable I've ever had!

Again the single display is on ef the best I've had on abike. Easily readable with a rev counter you can actually see, even though its almost redundant in use on an actor!

The height adjustable screen is pretty good too. On its lower setting, I can feel some wind blast, but I don't get the buffeting which sounds like someone drumming on my lid that I do on a lot of bikes!

Front suspension feels like a pogo stick when bouncing it up and down at standstill. It feels way too soft, but on the move, it soaks up London's put holes very well. Again, no complaints in this dept.

Whilst I'm obviously going to miss that lovely mid-range punch of the MT, I've learned that a flick of the mode switch into any of the 3 sport modes gives me more than enough response for what I need. It appears the engine is giving me just under 70mpg which is always good, if a little down on the NCX? Once again, no complaints in this dept.

So I don't really have anything to criticise it over and its working out very well for me. Parking next to a kerb helps with the getting on and off and I hope it will for some time yet. I have a feeling its going to make its way into my top 5 bikes. Its already in the top 10...

Can something not be done about your knee TinPan?

Skub wrote: Fri Mar 25, 2022 2:29 pm Can something not be done about your knee TinPan?

Real Nordie comment

slowsider wrote: Fri Mar 25, 2022 2:34 pm

Skub wrote: Fri Mar 25, 2022 2:29 pm Can something not be done about your knee TinPan?

Real Nordie comment

DeWalt for the connoisseur.

Skub wrote: Fri Mar 25, 2022 2:29 pm Can something not be done about your knee TinPan?

Yes, it'll get replaced - eventually! It's who pays for it that's causing the delay!

700 tracer it is then...

No. Its stays. I cant see me ever replacing it. Its a keeper!

I thought i'd broke it this morning! I must have knocked it into S-mode without realising. What I also didn't know is it retains the last selected S-mode you used, as opposed to reverting back to S1. So the last mode I used was S3 which is when it changes down quicker and holds the gears longer. So I pulled away from the lights and it just stayed in 1st gear revving its nuts off and dint appear to want to change gear!! Took me a few minutes to realise what was happening! Most disconcerting!

I modified it today. I put a black backed 8x6 number plate on it! Should be faster and more economical now as there's less drag!

Taipan wrote: Mon Apr 04, 2022 7:43 pm I modified it today. I put a black backed 8x6 number plate on it! Should be faster and more economical now as there's less drag!

And get your knee down

Yorick wrote: Mon Apr 04, 2022 7:46 pm

Taipan wrote: Mon Apr 04, 2022 7:43 pm I modified it today. I put a black backed 8x6 number plate on it! Should be faster and more economical now as there's less drag!

And get your knee down

Taipan wrote: Mon Apr 04, 2022 7:53 pm

Yorick wrote: Mon Apr 04, 2022 7:46 pm

Taipan wrote: Mon Apr 04, 2022 7:43 pm I modified it today. I put a black backed 8x6 number plate on it! Should be faster and more economical now as there's less drag!

And get your knee down

Swoon.

A new screen is on its way from Powerbronze and I used the forum discount code too!

HONDA ,X-ADV, 17-20 (520 MM HIGH) 420-H153

SKU: 420-H153-019

Colour
FROSTED STEALTH GREY
1 £85.00
Subtotal £85.00
Discount (UKFORUM1) -£8.50
Shipping & Handling £5.00
Grand Total £81.50