revtothelimit - motorbike forum

Skub wrote: Fri Nov 21, 2025 2:35 pm

Taipan wrote: Fri Nov 21, 2025 2:30 pm Isnt it just. Second bastard puncture i've had on this wheel too! I suppose the tyre might be easier this time as its been stretched over the wheel rim twice now?

I swore I'd never do it again and I plan on keeping that promise.

I'm tempted to go and get the sh300 I can have, and leave the At until spring!

Skub wrote: Fri Nov 21, 2025 2:28 pm

Taipan wrote: Fri Nov 21, 2025 2:15 pm I thinKi've found the puncture hole. If I'm really lucky, I can break the bead and just pull the tube the part of teh tube out that needs apatch then put it back again. I do have a spare tube here though if that doesnt work. Bastard hard work gettibg that tyre over the bead but no bike shops round here and car tyre places wont touch them, so its my job whether I like it or not.

It's a cvnt of a job with modern day stiffer sidewalled tyres.

I can fit big tyres to the GSXR no problem. Just a knack.

Enduro tyres are designed to run as low as 5 psi and tyre walls are super stiff.

My pal has all the gear so take beer to his place

I'd just take it to FWR on Monday and say "lads, fix that"

Job done, effortless.

weeksy wrote: Fri Nov 21, 2025 2:59 pm I'd just take it to FWR on Monday and say "lads, fix that"

Job done, effortless.

I wished. I need it for work on monday...

Taipan wrote: Fri Nov 21, 2025 3:48 pm

weeksy wrote: Fri Nov 21, 2025 2:59 pm I'd just take it to FWR on Monday and say "lads, fix that"

Job done, effortless.

I wished. I need it for work on monday...

I'm missing something... you work in London, FWR is in London ?

weeksy wrote: Fri Nov 21, 2025 4:16 pm

Taipan wrote: Fri Nov 21, 2025 3:48 pm

weeksy wrote: Fri Nov 21, 2025 2:59 pm I'd just take it to FWR on Monday and say "lads, fix that"

Job done, effortless.

I wished. I need it for work on monday...

I'm missing something... you work in London, FWR is in London ?

I cant ride it with a flat tyre!

Taipan wrote: Fri Nov 21, 2025 5:16 pm

weeksy wrote: Fri Nov 21, 2025 4:16 pm

Taipan wrote: Fri Nov 21, 2025 3:48 pm

I wished. I need it for work on monday...

I'm missing something... you work in London, FWR is in London ?

I cant ride it with a flat tyre!

I thought it was losing a couple of psi?

Cover me boys, i'm going in!




I'm hoping to jus get the patch on from here and then put the tyre back on wiithout nipping the tube...




I've not fitted the centre stand yet, but it is literally a 2 second job to slide it into place and use it for maintenance. I might not even bother permanently fitting it!

Aas I'm doing stuff on the bike it occured to me I havent heard back fromHonda about my warranty claim. So i searched for the email to te locak dealer and found it and started to write to them for an update, mainly as i'm panicking. as the TFT screen is c£3k! Anyway, as i'm writing the email they ring me to get it booked in! Spooky! Anyway, phew, Honda are covering it. I'm getting them to fit the centre stand whilst they have it..

Looking how clean it is in the pics the valeter did a good job

Supermofo wrote: Sat Nov 22, 2025 2:58 pm Looking how clean it is in the pics the valeter did a good job

Yeah, he does well. TBH I wouldn't say its to Weeksy levels, but for what it cost (£90) and then he applies a mixture of ACF50 and XCP it looks a hell of a lot better than I'd ever get it and its now protected fro winter to boot!

Well no, just looking at the lower dogbone and linkage tells me that, but you’re right that for the price it looks a good job.

£90 is a cheap/quick wash now? How much to do it right then?

Skub wrote: Sat Nov 22, 2025 3:41 pm £90 is a cheap/quick wash now? How much to do it right then?

No, he does a full, thorough valet, and then applies the rust protection. He was hear about 5 hours!± Mind you he had a lot of work to do! It cost more if you want the bike detailed. Sadly I think I was his last job and he'll retire now?

https://www.bikeclean.co.uk/directions/ ... -services/

Quite a nice looking bike in that colour, does need tubeless spokes though, can you let honda know.

Dodgy69 wrote: Sat Nov 22, 2025 4:32 pm Quite a nice looking bike in that colour, does need tubeless spokes though, can you let honda know.

The Adv Sport model does have them and a smaller front wheel. But it has a bigger tank and was even heavier so I went for this one. I think the wheels are interchangeable but the price of them second hand is the price of many, many inner tubes. Still a teeny bit tempted though...

https://www.ebay.co.uk/itm/297774938876 ... R4STysPVZg

Taipan wrote: Sat Nov 22, 2025 3:57 pm

Skub wrote: Sat Nov 22, 2025 3:41 pm £90 is a cheap/quick wash now? How much to do it right then?

No, he does a full, thorough valet, and then applies the rust protection. He was hear about 5 hours!± Mind you he had a lot of work to do! It cost more if you want the bike detailed. Sadly I think I was his last job and he'll retire now?

https://www.bikeclean.co.uk/directions/ ... -services/

Your dirty bike broke his spirit.

Tyre dropped 2 psi over night. Some of that would have been me letting air out when I released the airline from the valve! Anyway, i'll take that as a win!

Taipan wrote: Sun Nov 23, 2025 10:23 am Tyre dropped 2 psi over night. Some of that would have been me letting air out when I released the airline from the valve! Anyway, i'll take that as a win!

It’s actually the opposite way round. Valves lose when you connect, not when you remove