A right now thread
- Cousin Jack
- Posts: 4283
- Joined: Mon Mar 16, 2020 4:36 pm
- Location: Down in the Duchy
- Has thanked: 2560 times
- Been thanked: 2183 times
Re: A right now thread
Digesting Afternoon Tea, and waiting for canapés and champagne at 7:00, followed by dinner
Cornish Tart #1
Remember An Gof!
Remember An Gof!
- Cousin Jack
- Posts: 4283
- Joined: Mon Mar 16, 2020 4:36 pm
- Location: Down in the Duchy
- Has thanked: 2560 times
- Been thanked: 2183 times
Re: A right now thread
Digesting Afternoon Tea, and waiting for canapés and champagne at 7:00, followed by Dinner. This Xmas in a hotel lark involves a great deal of food.
Cornish Tart #1
Remember An Gof!
Remember An Gof!
-
- Posts: 4702
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2500 times
Re: A right now thread
Cousin Jack wrote: ↑Sun Dec 24, 2023 6:45 pm Digesting Afternoon Tea, and waiting for canapés and champagne at 7:00, followed by dinner
Cousin Jack wrote: ↑Sun Dec 24, 2023 6:47 pm Digesting Afternoon Tea, and waiting for canapés and champagne at 7:00, followed by Dinner. This Xmas in a hotel lark involves a great deal of food.
Eating for two?
- MingtheMerciless
- Posts: 3461
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2914 times
- Been thanked: 1846 times
Re: A right now thread
Cooking dinner for me and Mrs M.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
- Cousin Jack
- Posts: 4283
- Joined: Mon Mar 16, 2020 4:36 pm
- Location: Down in the Duchy
- Has thanked: 2560 times
- Been thanked: 2183 times
Re: A right now thread
No, just brain fade.cheb wrote: ↑Mon Dec 25, 2023 10:00 amCousin Jack wrote: ↑Sun Dec 24, 2023 6:45 pm Digesting Afternoon Tea, and waiting for canapés and champagne at 7:00, followed by dinnerCousin Jack wrote: ↑Sun Dec 24, 2023 6:47 pm Digesting Afternoon Tea, and waiting for canapés and champagne at 7:00, followed by Dinner. This Xmas in a hotel lark involves a great deal of food.
Eating for two?
Cornish Tart #1
Remember An Gof!
Remember An Gof!
- Yorick
- Posts: 16279
- Joined: Sat Mar 14, 2020 8:20 pm
- Location: Paradise
- Has thanked: 10117 times
- Been thanked: 6649 times
- MrLongbeard
- Posts: 4371
- Joined: Sun Mar 15, 2020 2:06 pm
- Has thanked: 579 times
- Been thanked: 2289 times
Re: A right now thread
Lunch eaten, bottle of wine finished, speech by murdering adulterous bastard avoided by doing the washing up, must be time for an afternoon nap before family facetime call.
- Yambo
- Posts: 2448
- Joined: Mon Mar 16, 2020 8:08 pm
- Location: Self Isolating
- Has thanked: 614 times
- Been thanked: 1632 times
Re: A right now thread
In Gatwick departures with M.
Have a merry Boxing Day and happy New Year everyone.
Have a merry Boxing Day and happy New Year everyone.
-
- Posts: 4702
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2500 times
Re: A right now thread
Once I've finished this mug of tea I'll off to the shed to do stuff, cut firewood, make a couple of door frame facings, a bit of tidying.
Last edited by cheb on Tue Dec 26, 2023 9:09 am, edited 1 time in total.
- Potter
- Posts: 9665
- Joined: Sat Mar 14, 2020 1:32 pm
- Has thanked: 2216 times
- Been thanked: 4611 times
Re: A right now thread
Working, from 'ome.
I've got a strategy to write.
It's Boxing Day and usually I'd take the day off but I need to get this done, and anyway yesterday my daughter had me drilling walls and putting shelves up on Christmas morning, so today is less physical and I'm actually getting paid for it.
The home entertainment is watching two family members (in Grinch PJs) robustly challenging each other on the best way to set up a 3D printer for their new business. Once it's all set up and ironed out I'll have a look at what bike parts it can make.
I've got a strategy to write.
It's Boxing Day and usually I'd take the day off but I need to get this done, and anyway yesterday my daughter had me drilling walls and putting shelves up on Christmas morning, so today is less physical and I'm actually getting paid for it.
The home entertainment is watching two family members (in Grinch PJs) robustly challenging each other on the best way to set up a 3D printer for their new business. Once it's all set up and ironed out I'll have a look at what bike parts it can make.
- mangocrazy
- Posts: 6478
- Joined: Tue Dec 22, 2020 9:58 pm
- Has thanked: 2319 times
- Been thanked: 3374 times
Re: A right now thread
Pretty much anything you want provided you can code it and the printer is big enough, I'd have thought.
There is no cloud, just somebody else's computer.
- Potter
- Posts: 9665
- Joined: Sat Mar 14, 2020 1:32 pm
- Has thanked: 2216 times
- Been thanked: 4611 times
Re: A right now thread
Maybe, when I say 'business' it's really just a hobby that will hopefully be cost neutral when a few bits have been sold to cover costs.mangocrazy wrote: ↑Tue Dec 26, 2023 11:01 amPretty much anything you want provided you can code it and the printer is big enough, I'd have thought.
He's currently cursing because whatever he was making has collapsed, apparently the support wasn't good enough, whatever that means.
I think the cost of raw material means you'd have to sell stuff to make it pay for itself, otherwise it's cheaper to buy what you want off the shelf.
- mangocrazy
- Posts: 6478
- Joined: Tue Dec 22, 2020 9:58 pm
- Has thanked: 2319 times
- Been thanked: 3374 times
Re: A right now thread
A 3D printer is one of those toys that I really quite fancy, but which would never pay for itself in my hands. It would be ideal to make prototype parts, or parts for the LC that are NLA from Yamaha. One of the guys on the LC nutters forum has been remanufacturing stuff like LC fuse boxes that use blade fuses rather than glass ones, and leakdown testing kits. He's putting them out at not too much over cost and folk are biting his hand off for bits (me included). That's the kind of use I'd see one for.Potter wrote: ↑Tue Dec 26, 2023 11:08 amMaybe, when I say 'business' it's really just a hobby that will hopefully be cost neutral when a few bits have been sold to cover costs.mangocrazy wrote: ↑Tue Dec 26, 2023 11:01 amPretty much anything you want provided you can code it and the printer is big enough, I'd have thought.
He's currently cursing because whatever he was making has collapsed, apparently the support wasn't good enough, whatever that means.
I think the cost of raw material means you'd have to sell stuff to make it pay for itself, otherwise it's cheaper to buy what you want off the shelf.
There is no cloud, just somebody else's computer.
-
- Posts: 13488
- Joined: Mon Mar 16, 2020 7:57 pm
- Location: Milton Keynes
- Has thanked: 2611 times
- Been thanked: 6014 times
Re: A right now thread
We use ours (at work) for fixtures, jigs, clamps...little knick-knacky stuff for holding stuff while you bond it, measure it, whack it for a noise test and whatever.
It's a bit like people at home "turning up spacers" (never quite figured out why people have so much to space, TBH) but with more axes.
I've used it for "proper" parts too, for example the top caps on the pylons of this wing are MJF printed and painted. I'm gonna go out on a limb and suggest maybe don't try and get McLaren ad your first customer
It's a bit like people at home "turning up spacers" (never quite figured out why people have so much to space, TBH) but with more axes.
I've used it for "proper" parts too, for example the top caps on the pylons of this wing are MJF printed and painted. I'm gonna go out on a limb and suggest maybe don't try and get McLaren ad your first customer
- mangocrazy
- Posts: 6478
- Joined: Tue Dec 22, 2020 9:58 pm
- Has thanked: 2319 times
- Been thanked: 3374 times
Re: A right now thread
Yebbut your knick-knacky things are in a different league to what most of us would use one for.
Having said that, give me a lathe, a milling machine and a 3D printer and I could keep myself occupied all winter long...
Having said that, give me a lathe, a milling machine and a 3D printer and I could keep myself occupied all winter long...
There is no cloud, just somebody else's computer.
-
- Posts: 13488
- Joined: Mon Mar 16, 2020 7:57 pm
- Location: Milton Keynes
- Has thanked: 2611 times
- Been thanked: 6014 times
Re: A right now thread
I can also spend a grand on having a bunch of different filaments knocking about and not even raise an eyebrow
- Potter
- Posts: 9665
- Joined: Sat Mar 14, 2020 1:32 pm
- Has thanked: 2216 times
- Been thanked: 4611 times
Re: A right now thread
I've got all those and I can make all the stuff I see people selling on the bike forums, but I cba, I don't need the money and I don't want to spend the time making all those things unless I need one for myself.mangocrazy wrote: ↑Tue Dec 26, 2023 11:26 am
Having said that, give me a lathe, a milling machine and a 3D printer and I could keep myself occupied all winter long...
My lathe and mill are manual, so I can't just programme it and walk off, I have to stand there actually turning wheels and changing bits, so it's time consuming, which might be ok when I have all the time in the world, but I don't at the moment.
They're very handy though for turning up one-off wheel spacers and little bits, or machining stuff down to fit.
- mangocrazy
- Posts: 6478
- Joined: Tue Dec 22, 2020 9:58 pm
- Has thanked: 2319 times
- Been thanked: 3374 times
Re: A right now thread
I wouldn't be viewing it as a money-making operation, just something to fill my time in the dog days of winter. I'm retired so my time is my own to do whatever I want, and it's surprising just how many little spacers and knick-kacks you need when tatting about with bikes.Potter wrote: ↑Tue Dec 26, 2023 11:36 amI've got all those and I can make all the stuff I see people selling on the bike forums, but I cba, I don't need the money and I don't want to spend the time making all those things unless I need one for myself.mangocrazy wrote: ↑Tue Dec 26, 2023 11:26 am
Having said that, give me a lathe, a milling machine and a 3D printer and I could keep myself occupied all winter long...
My lathe and mill are manual, so I can't just programme it and walk off, I have to stand there actually turning wheels and changing bits, so it's time consuming, which might be ok when I have all the time in the world, but I don't at the moment.
They're very handy though for turning up one-off wheel spacers and little bits, or machining stuff down to fit.
So you've got all the gear and no time to use it, and I've got plenty of spare time but only a pillar drill to my name...
There is no cloud, just somebody else's computer.
- Potter
- Posts: 9665
- Joined: Sat Mar 14, 2020 1:32 pm
- Has thanked: 2216 times
- Been thanked: 4611 times
Re: A right now thread
I had similar ideas, I sometimes have days where I have the whole day free, so I figured that with all that gear I'd knock up a few bits and pieces and perhaps sell them, mostly for something to do but also then the kit would pay for itself.mangocrazy wrote: ↑Tue Dec 26, 2023 11:42 am
I wouldn't be viewing it as a money-making operation, just something to fill my time in the dog days of winter. I'm retired so my time is my own to do whatever I want, and it's surprising just how many little spacers and knick-kacks you need when tatting about with bikes.
So you've got all the gear and no time to use it, and I've got plenty of spare time but only a pillar drill to my name...
But it takes ages to make stuff manually, I can easily end up spending hours just turning up fairly simple stuff, so I decided that I wasn't going to take on work because as soon as you announce it then loads of people want stuff and the hours literally disappear very quickly. I ended up with a full day of machining stuff for less than I can earn in an hour or so doing easy consultancy stuff on my laptop with a brew in hand.
I've knocked the odd bit up for mates and I still will, but taking on paid machining work has to be a labour of love, at least doing it all purely manually anyway. If you have access to better kit and you can knock up twenty after loading a programme in and letting it do it's thing automatically then maybe.
This 3d printer is good, it's mainly for Mrs Potter to make things for her hobby, then sell some so it all pays for itself and her hobby is free, she can load up plans for what she wants and then get on with stuff whilst it does it's thing, all you have to do is remove it when it's finished and press play again.
-
- Posts: 13488
- Joined: Mon Mar 16, 2020 7:57 pm
- Location: Milton Keynes
- Has thanked: 2611 times
- Been thanked: 6014 times