Page 7 of 36

Re: Tool purchases

Posted: Tue Mar 16, 2021 9:14 pm
by Mussels
I'm off work using up holiday this week so I'm pottering around doing some of those jobs I've been putting off. I've put some lighting and shelves up in the garage, ordered bits to improve power sockets out there and now this plus the compressor to drive them. The devil makes expensive work for idle hands.
https://www.toolstation.com/draper-air-tool-kit/p15800
Image
Image

Re: Tool purchases

Posted: Tue Mar 16, 2021 9:22 pm
by Horse
Taipan wrote: Mon Jan 25, 2021 7:54 pm I have a Dremel 3000 which I found in the loft. It's brand new in the box and I've no idea where, or who, it came from?
Is it every day you post "I found ... in the loft"?

Re: Tool purchases

Posted: Tue Mar 16, 2021 9:36 pm
by Taipan
Horse wrote: Tue Mar 16, 2021 9:22 pm
Taipan wrote: Mon Jan 25, 2021 7:54 pm I have a Dremel 3000 which I found in the loft. It's brand new in the box and I've no idea where, or who, it came from?
Is it every day you post "I found ... in the loft"?
Today I found i brand new tap and die set, a pair of weiss trousers and my old motorola brick phone. Tis a veritable treasure chest my loft! :D

Re: Tool purchases

Posted: Tue Mar 16, 2021 9:37 pm
by Mussels
gremlin wrote: Tue Mar 16, 2021 8:00 pm Fear me, hedges and undergrowth!!!
https://www.screwfix.com/p/makita-duh52 ... bare/7852x


Having slowing reduced the cord on my old trimmer over the years, unintentionally, I figured cordless was the sensible option. Being as I have a few Makita tools made sense to carry on the collection and share batteries.
I got rid of my hedges instead, just have a few trunks left to take to the tip. All to be replaced by bamboo because each stem only needs trimming once and I can do that by bending them over, no more wobbling on top of 3m ladders as the mountain will come to Mohammed. All I need to do now is make a dozen more large planters and order a truck load of plants.
It's a lot of hard work removing old Leylandii.

Re: Tool purchases

Posted: Tue Mar 16, 2021 9:41 pm
by Mussels
Taipan wrote: Tue Mar 16, 2021 9:36 pm
Horse wrote: Tue Mar 16, 2021 9:22 pm
Taipan wrote: Mon Jan 25, 2021 7:54 pm I have a Dremel 3000 which I found in the loft. It's brand new in the box and I've no idea where, or who, it came from?
Is it every day you post "I found ... in the loft"?
Today I found i brand new tap and die set, a pair of weiss trousers and my old motorola brick phone. Tis a veritable treasure chest my loft! :D
I'm having a similar experience now I'm sorting the garage, today I found spring compressors and a hub puller I haven't seen for 20 years. Also a set of unused stud extractors and lots of partially used boxes of screws, the unused tap and die set turned up last week.

Re: Tool purchases

Posted: Tue Mar 16, 2021 10:46 pm
by gremlin
Mussels wrote: Tue Mar 16, 2021 9:37 pm
gremlin wrote: Tue Mar 16, 2021 8:00 pm Fear me, hedges and undergrowth!!!
https://www.screwfix.com/p/makita-duh52 ... bare/7852x


Having slowing reduced the cord on my old trimmer over the years, unintentionally, I figured cordless was the sensible option. Being as I have a few Makita tools made sense to carry on the collection and share batteries.
I got rid of my hedges instead, just have a few trunks left to take to the tip. All to be replaced by bamboo because each stem only needs trimming once and I can do that by bending them over, no more wobbling on top of 3m ladders as the mountain will come to Mohammed. All I need to do now is make a dozen more large planters and order a truck load of plants.
It's a lot of hard work removing old Leylandii.
I have lots of bamboo in my garden. Black and gold. Some over 20ft tall. Don't underestimate the work it needs to keep it in trim.
Shout if you need any more details.

Re: Tool purchases

Posted: Wed Mar 17, 2021 8:02 am
by Yorick
Taipan wrote: Tue Mar 16, 2021 9:36 pm
Horse wrote: Tue Mar 16, 2021 9:22 pm
Taipan wrote: Mon Jan 25, 2021 7:54 pm I have a Dremel 3000 which I found in the loft. It's brand new in the box and I've no idea where, or who, it came from?
Is it every day you post "I found ... in the loft"?
Today I found i brand new tap and die set, a pair of weiss trousers and my old motorola brick phone. Tis a veritable treasure chest my loft! :D
Today I found a Panegale in the loft :)

Re: Tool purchases

Posted: Thu Mar 18, 2021 5:01 pm
by Silly Car
Not found in my loft but B&Q (cheapest and available locally, a Ryobi Reciprocating saw for £60.

I can’t find a picture to share, it isn’t the newest brushless model but it’ll be great for some heavy duty pruning and chopping shit up.

Re: Tool purchases

Posted: Tue Mar 30, 2021 3:17 pm
by Silly Car
The couriers have just dropped these off from Rutlands and Axminster
CA1CC938-9B63-4C42-ADAD-36BC6E0A780C.jpeg
CA1CC938-9B63-4C42-ADAD-36BC6E0A780C.jpeg (336.91 KiB) Viewed 1498 times
6235DB47-70DB-4129-B10C-08787FC1EC53.jpeg
6235DB47-70DB-4129-B10C-08787FC1EC53.jpeg (431.49 KiB) Viewed 1498 times
51847E07-3818-4758-A97B-FBC3DE1919E2.jpeg
51847E07-3818-4758-A97B-FBC3DE1919E2.jpeg (519.05 KiB) Viewed 1498 times
An upgrade to my plastic China special that I’ve used in the past. I’ve opted for UJK screws over Kreg based on having used them in the past, cost and availability.

I’ve got a UJK parf guide system in my click and collect ready for collection by close of play tomorrow but I suspect I may be pushing it this month in terms of new tools...

https://www.axminstertools.com/ujk-tech ... tem-102278 based on Pythagorus formula for us brits or 3,4,5 for the mercans ;)

Re: Tool purchases

Posted: Wed Mar 31, 2021 10:16 am
by cheb
A 5.5mm 1/4" drive socket. The handle has snapped on a very cheap allen key and I can secure the remains into said socket.

I hope I've not wasted the £1 it cost me.

Re: Tool purchases

Posted: Wed Mar 31, 2021 10:45 am
by Taipan
Yorick wrote: Wed Mar 17, 2021 8:02 am
Taipan wrote: Tue Mar 16, 2021 9:36 pm
Horse wrote: Tue Mar 16, 2021 9:22 pm

Is it every day you post "I found ... in the loft"?
Today I found i brand new tap and die set, a pair of weiss trousers and my old motorola brick phone. Tis a veritable treasure chest my loft! :D
Today I found a Panegale in the loft :)
Pah! Buell footpegs and i've never owned a Buell! :wtf: ANd soem things for a paddock stand, I think?

Image

Re: Tool purchases

Posted: Wed Mar 31, 2021 11:54 am
by iansoady
I fitted footrests like those to my 955i Tiger to give a bit more knee flex......

Re: Tool purchases

Posted: Wed Mar 31, 2021 11:06 pm
by mangocrazy
Mussels wrote: Tue Mar 16, 2021 9:37 pm I got rid of my hedges instead, just have a few trunks left to take to the tip. All to be replaced by bamboo because each stem only needs trimming once and I can do that by bending them over, no more wobbling on top of 3m ladders as the mountain will come to Mohammed.
I'd be very wary of letting bamboo anywhere near your garden. It propagates very rapidly, has an extensive root system and will spread anywhere it feels like. Your neighbours may not be very happy at all about this.

A friend of mine has a neighbour who planted bamboo in her garden, which spread rapidly to my friend's garden, spreading under the decking and then causing my friend to have her decking ripped up so she could get at the bamboo to eradicate it. It's like playing a game of whack-a-mole. You think you've got rid of it and it pops up somewhere else.

I wouldn't let the stuff anywhere near any land I owned.

Re: Tool purchases

Posted: Wed Mar 31, 2021 11:38 pm
by demographic
Silly Car wrote: Tue Mar 30, 2021 3:17 pm I’ve got a UJK parf guide system in my click and collect ready for collection by close of play tomorrow but I suspect I may be pushing it this month in terms of new tools...

https://www.axminstertools.com/ujk-tech ... tem-102278 based on Pythagorus formula for us brits or 3,4,5 for the mercans ;)
Bloke I was working with a couple of years ago had that Parf Guide system, he loved it.
He used it to make up 3/4" mdf tabletops which in conjunction with his Festool rail and TS55 railsaw was great for longish square cuts.

I just bought a multifunction slab to use with my TS55 and rail, cheaper in the short term but the Parf Guide system is a lot better long term.

Re: Tool purchases

Posted: Wed Mar 31, 2021 11:46 pm
by Mussels
mangocrazy wrote: Wed Mar 31, 2021 11:06 pm
Mussels wrote: Tue Mar 16, 2021 9:37 pm I got rid of my hedges instead, just have a few trunks left to take to the tip. All to be replaced by bamboo because each stem only needs trimming once and I can do that by bending them over, no more wobbling on top of 3m ladders as the mountain will come to Mohammed.
I'd be very wary of letting bamboo anywhere near your garden. It propagates very rapidly, has an extensive root system and will spread anywhere it feels like. Your neighbours may not be very happy at all about this.

A friend of mine has a neighbour who planted bamboo in her garden, which spread rapidly to my friend's garden, spreading under the decking and then causing my friend to have her decking ripped up so she could get at the bamboo to eradicate it. It's like playing a game of whack-a-mole. You think you've got rid of it and it pops up somewhere else.

I wouldn't let the stuff anywhere near any land I owned.
It is possible to get varieties that spread very slowly, my neighbour has a very old clump that had hardly spread. I'm going for the fast growing versions but they will all be contained in planters.

Re: Tool purchases

Posted: Wed Mar 31, 2021 11:50 pm
by mangocrazy
Mussels wrote: Wed Mar 31, 2021 11:46 pm
mangocrazy wrote: Wed Mar 31, 2021 11:06 pm
Mussels wrote: Tue Mar 16, 2021 9:37 pm I got rid of my hedges instead, just have a few trunks left to take to the tip. All to be replaced by bamboo because each stem only needs trimming once and I can do that by bending them over, no more wobbling on top of 3m ladders as the mountain will come to Mohammed.
I'd be very wary of letting bamboo anywhere near your garden. It propagates very rapidly, has an extensive root system and will spread anywhere it feels like. Your neighbours may not be very happy at all about this.

A friend of mine has a neighbour who planted bamboo in her garden, which spread rapidly to my friend's garden, spreading under the decking and then causing my friend to have her decking ripped up so she could get at the bamboo to eradicate it. It's like playing a game of whack-a-mole. You think you've got rid of it and it pops up somewhere else.

I wouldn't let the stuff anywhere near any land I owned.
It is possible to get varieties that spread very slowly, my neighbour has a very old clump that had hardly spread. I'm going for the fast growing versions but they will all be contained in planters.
Ok, that puts a different complexion on it. Should be OK in planters. It's causing my friend all sorts of stress, and I know how invasive it was in my parent's garden.

Re: Tool purchases

Posted: Thu Apr 01, 2021 9:02 am
by Silly Car
demographic wrote: Wed Mar 31, 2021 11:38 pm
Silly Car wrote: Tue Mar 30, 2021 3:17 pm I’ve got a UJK parf guide system in my click and collect ready for collection by close of play tomorrow but I suspect I may be pushing it this month in terms of new tools...

https://www.axminstertools.com/ujk-tech ... tem-102278 based on Pythagoras formula for us brits or 3,4,5 for the mercans ;)
Bloke I was working with a couple of years ago had that Parf Guide system, he loved it.
He used it to make up 3/4" mdf tabletops which in conjunction with his Festool rail and TS55 railsaw was great for longish square cuts.

I just bought a multifunction slab to use with my TS55 and rail, cheaper in the short term but the Parf Guide system is a lot better long term.
The click and collect expired as I just ran out of time yesterday and I’m still cogitating about the cost of the system. My local store has the MK1 system at £140 rather than the MK2 at £200 which is somewhat less painful on the wallet.

I’ve had a similar conversation on Facebook with reburner, I’ve seen the slabs and one would last me a fair while but I also have a spare sheet of 18mm MDF kicking around so could make one to suit...

Anyway, a decision will be made at some point, but today I’m likely to curse the fact I don’t have a MFT as I’ve got 5 sheets of ply to turn into cabinets... :lol:

Re: Tool purchases

Posted: Thu Apr 01, 2021 10:22 am
by demographic
I just have two wooden sawhorses/stools with two lengths of eight foot long 2x2 across them lengthways then 4 bits of 2x2 at about a meter long across them and the slab over them.
That stops it all sagging and whatever.
Then I have four Veritas large Parf dogs to square up the workpiece and cut.
I can't remember who made my multi function slab but when I got it I Danish Oiled the whole thing twice but to be fair I've not used it much, the crosscut guiderail on my Festool HKC is good enough for most of my cuts currently.

Re: Tool purchases

Posted: Thu Apr 01, 2021 11:43 am
by Silly Car
demographic wrote: Thu Apr 01, 2021 10:22 am I just have two wooden sawhorses/stools with two lengths of eight foot long 2x2 across them lengthways then 4 bits of 2x2 at about a meter long across them and the slab over them.
That stops it all sagging and whatever.
Then I have four Veritas large Parf dogs to square up the workpiece and cut.
I can't remember who made my multi function slab but when I got it I Danish Oiled the whole thing twice but to be fair I've not used it much, the crosscut guiderail on my Festool HKC is good enough for most of my cuts currently.
That’s pretty much what set up is, with a 8x2 slab of chipboard flooring as the deck. The MFT MDF top would replace the chipboard.

Re: Tool purchases

Posted: Sat Apr 03, 2021 3:39 am
by ZRX61
This, but it was only $29, not $42.

https://www.lexivon.com/products/lx-181