I'm having trouble with an arthritic hip so have just bought a Yamaha X-max 250 "maxi-scoot". The layout of my garage / drive means that i go into it forwards but want to exit in the reverse direction so want to rotate the bike to point the other way. I did manage this with a 90 point turn the other day but felt there must be a better way.
I've seen people build small turntables using a lazy susan type bearing like this:
Anybody here tried something of this type?
Turntable
-
Mussels
- Posts: 4441
- Joined: Mon Mar 16, 2020 9:02 pm
- Has thanked: 836 times
- Been thanked: 1238 times
-
PitaNaanRoti
- Posts: 297
- Joined: Thu Mar 19, 2020 8:24 am
- Has thanked: 25 times
- Been thanked: 54 times
Re: Turntable
That car one's too big. Yes it has a side stand. 250 is as small as I want to go (and actually smaller wouldn't solve the problem). Oh, and I'm a cheapskate so total cost must be < £50 (a lot less if possible).
Don't know what happened to my link: https://www.amazon.co.uk/SUSAN-TURNTABL ... B007U6CWNU
Don't know what happened to my link: https://www.amazon.co.uk/SUSAN-TURNTABL ... B007U6CWNU
Re: Turntable
Replied before I saw this - may have a look if they'll let me in.PitaNaanRoti wrote: ↑Sat Jul 03, 2021 11:20 am There’s a guy on the UKGSeR forum who makes them - about £50
I did find this thread which is probably similar (or even the same bloke): https://www.thetriumphforum.com/threads ... ble.22871/
Last edited by iansoady on Sat Jul 03, 2021 11:51 am, edited 1 time in total.
-
Mussels
- Posts: 4441
- Joined: Mon Mar 16, 2020 9:02 pm
- Has thanked: 836 times
- Been thanked: 1238 times
Re: Turntable
Have you tried pivoting it round on the stand? If it works you probably just need a puck so it doesn't make a hole in the floor.iansoady wrote: ↑Sat Jul 03, 2021 11:40 am That car one's too big. Yes it has a side stand. 250 is as small as I want to go (and actually smaller wouldn't solve the problem). Oh, and I'm a cheapskate so total cost must be < £50 (a lot less if possible).
Don't know what happened to my link: https://www.amazon.co.uk/SUSAN-TURNTABL ... B007U6CWNU
Re: Turntable
Ah, but that might make a hole in the carpet.....
The reason I got the X-max was my arthritic hip and advancing senility which makes anything involving lots of effort not a good plan.
The reason I got the X-max was my arthritic hip and advancing senility which makes anything involving lots of effort not a good plan.
-
PitaNaanRoti
- Posts: 297
- Joined: Thu Mar 19, 2020 8:24 am
- Has thanked: 25 times
- Been thanked: 54 times
-
Cousin Jack
- Posts: 4455
- Joined: Mon Mar 16, 2020 4:36 pm
- Location: Down in the Duchy
- Has thanked: 2551 times
- Been thanked: 2286 times
-
Mussels
- Posts: 4441
- Joined: Mon Mar 16, 2020 9:02 pm
- Has thanked: 836 times
- Been thanked: 1238 times
Re: Turntable
Careful with the wheel sizes, too small and you need a perfectly smooth hard floor but too big and you won't get the scooter on it. CJ's link looks good if your floor is suitable.
Re: Turntable
I have a similar issue but it is due to getting bikes in and out of my Garden. Lazy Susan with a piece of 5mm steel plate affixed to it with tek screws allows me to turn the bike 180. This is using it to turn my GS 1200. Sorry about the fat ugly bloke in the vid 
https://www.dropbox.com/s/cqitac083trjw ... 8.mp4?dl=0
https://www.dropbox.com/s/cqitac083trjw ... 8.mp4?dl=0
-
Skub
- Posts: 12167
- Joined: Mon Mar 16, 2020 5:32 pm
- Location: Norn Iron
- Has thanked: 9828 times
- Been thanked: 10145 times
Re: Turntable
I bet you're not really sorry at all.maccecht wrote: ↑Sat Jul 03, 2021 8:24 pm I have a similar issue but it is due to getting bikes in and out of my Garden. Lazy Susan with a piece of 5mm steel plate affixed to it with tek screws allows me to turn the bike 180. This is using it to turn my GS 1200. Sorry about the fat ugly bloke in the vid
https://www.dropbox.com/s/cqitac083trjw ... 8.mp4?dl=0
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
Walt Whitman
https://soundcloud.com/skub1955
Re: Turntable
.Skub wrote: ↑Sat Jul 03, 2021 8:48 pmI bet you're not really sorry at all.maccecht wrote: ↑Sat Jul 03, 2021 8:24 pm I have a similar issue but it is due to getting bikes in and out of my Garden. Lazy Susan with a piece of 5mm steel plate affixed to it with tek screws allows me to turn the bike 180. This is using it to turn my GS 1200. Sorry about the fat ugly bloke in the vid
https://www.dropbox.com/s/cqitac083trjw ... 8.mp4?dl=0
Regretfully you are indeed correct
Re: Turntable
That makes it look very easy. Lots of possibilities here - many thanks for all.maccecht wrote: ↑Sat Jul 03, 2021 8:24 pm I have a similar issue but it is due to getting bikes in and out of my Garden. Lazy Susan with a piece of 5mm steel plate affixed to it with tek screws allows me to turn the bike 180. This is using it to turn my GS 1200. Sorry about the fat ugly bloke in the vid
https://www.dropbox.com/s/cqitac083trjw ... 8.mp4?dl=0
-
Horse
- Posts: 11554
- Joined: Sun Mar 15, 2020 11:30 am
- Location: Always sunny southern England
- Has thanked: 6191 times
- Been thanked: 5087 times
Re: Turntable
Does that rely at all on the GS's balance point about the centre stand?maccecht wrote: ↑Sat Jul 03, 2021 8:24 pm I have a similar issue but it is due to getting bikes in and out of my Garden. Lazy Susan with a piece of 5mm steel plate affixed to it with tek screws allows me to turn the bike 180. This is using it to turn my GS 1200. Sorry about the fat ugly bloke in the vid
https://www.dropbox.com/s/cqitac083trjw ... 8.mp4?dl=0
Even bland can be a type of character 
Re: Turntable
Horse I just push thd back end down to get the front wheel up and spin it very little effort needed. Will post some pics up of the lazy Susan and plate.
As noted the centre stand sits on the plate
As noted the centre stand sits on the plate