good cheap cycle workshop stand
- formula400
- Posts: 1734
- Joined: Wed Apr 15, 2020 4:14 pm
- Location: London
- Has thanked: 444 times
- Been thanked: 863 times
good cheap cycle workshop stand
as above, I quite fancy a work stand for the cycles to make cleaning easier , nothing ££££ any recommendations on decent one at the cheaper end.
CBR650r
- weeksy
- Site Admin
- Posts: 23439
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5455 times
- Been thanked: 13103 times
Re: goo cheap cycle workshop stand
I get the impression to an extent you get what you pay for. Mine was about £50, 2 feet type, stability isn't wonderful, but it's ok for most things, I get around most jobs on it. I wouldn't recommend it though, but have no idea what make it I'd anyway as it's about 10 years old.
-
- Posts: 840
- Joined: Fri Aug 28, 2020 3:03 pm
- Has thanked: 2156 times
- Been thanked: 426 times
- MingtheMerciless
- Posts: 3557
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2948 times
- Been thanked: 1884 times
Re: goo cheap cycle workshop stand
Not much positive to add, I've a Bonty stand (which they don't make any more), it wasn't cheap. You have to be careful with the tripod positioning as otherwise it gets tippy, the tripod takes up a big area so its either outside or in the conservatory. Also the leg support struts ability to trap fingers make a 70's baby buggy look safe. I use it but only for big jobs or full strip downs.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
- Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: goo cheap cycle workshop stand
I have a Park stand - it wasn’t cheap and it isn’t perfect. The clamp can freeze and need to be hit with a mallet. It’s. A two legged affair - and with a bike on it , it is stable.
Lidl / Aldi do them every now and again , and decathlon is normally a good shout
Lidl / Aldi do them every now and again , and decathlon is normally a good shout
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2870 times
- Been thanked: 554 times
Re: goo cheap cycle workshop stand
I've got two stands, an older version of the Decathlon stand that Lostboy posted (mine has four legs instead of three) and a recently purchased Lifeline Pro Fork Mount.
https://www.wiggle.co.uk/lifeline-pro-f ... sJEALw_wcB
The Decathlon one was fine for road bikes but never really held mountain bikes at decent angle - the front wheel always dropped so the bike was in stoppie position. It did allow you to work on gears and helped with cleaning but was always spinning you needed the slightest bit of force on anything (bottom brackets for instance) so I'd end up loosening stuff with the bike on the floor and then lifting on to the stand. Became more of a PITA to use, hence the new purchase.
I chose the Lifeline stand because I've got an e-mtb and didn't fancy dangling it by the dropper post. Haven't tested in anger yet but it feels and looks more appropriate for my needs.
https://www.wiggle.co.uk/lifeline-pro-f ... sJEALw_wcB
The Decathlon one was fine for road bikes but never really held mountain bikes at decent angle - the front wheel always dropped so the bike was in stoppie position. It did allow you to work on gears and helped with cleaning but was always spinning you needed the slightest bit of force on anything (bottom brackets for instance) so I'd end up loosening stuff with the bike on the floor and then lifting on to the stand. Became more of a PITA to use, hence the new purchase.
I chose the Lifeline stand because I've got an e-mtb and didn't fancy dangling it by the dropper post. Haven't tested in anger yet but it feels and looks more appropriate for my needs.
- Attachments
-
- Lifeline_Pro_Fork_Mount_Bike_Workstand_01.jpg (212.22 KiB) Viewed 1199 times
- Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: goo cheap cycle workshop stand
I would have thought an ABBA stand would work best on an e-bikeBeancounter wrote: ↑Wed Jan 13, 2021 10:52 am I've got two stands, an older version of the Decathlon stand that Lostboy posted (mine has four legs instead of three) and a recently purchased Lifeline Pro Fork Mount.
https://www.wiggle.co.uk/lifeline-pro-f ... sJEALw_wcB
The Decathlon one was fine for road bikes but never really held mountain bikes at decent angle - the front wheel always dropped so the bike was in stoppie position. It did allow you to work on gears and helped with cleaning but was always spinning you needed the slightest bit of force on anything (bottom brackets for instance) so I'd end up loosening stuff with the bike on the floor and then lifting on to the stand. Became more of a PITA to use, hence the new purchase.
I chose the Lifeline stand because I've got an e-mtb and didn't fancy dangling it by the dropper post. Haven't tested in anger yet but it feels and looks more appropriate for my needs.
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2870 times
- Been thanked: 554 times
-
- Posts: 4446
- Joined: Mon Mar 16, 2020 9:02 pm
- Has thanked: 839 times
- Been thanked: 1242 times
Re: goo cheap cycle workshop stand
I tried a cheap stand that looked just like the Park Tools one, it was rubbish and I took it back. I replaced it with Park Tools and the difference was huge.
I'm not one to splash out on branded stuff but this was worth it.
I'm not one to splash out on branded stuff but this was worth it.
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2870 times
- Been thanked: 554 times
Re: good cheap cycle workshop stand
If you're minded, and can find the right base, this build-your-own looks like a decent option:
https://www.youtube.com/watch?v=AKiqDUSmJZA
Or follow Blake's from GMBN set-up:
https://www.youtube.com/watch?v=1qHCmCnA_Ks&t=20s
https://www.youtube.com/watch?v=AKiqDUSmJZA
Or follow Blake's from GMBN set-up:
https://www.youtube.com/watch?v=1qHCmCnA_Ks&t=20s
- formula400
- Posts: 1734
- Joined: Wed Apr 15, 2020 4:14 pm
- Location: London
- Has thanked: 444 times
- Been thanked: 863 times
Re: goo cheap cycle workshop stand
Think that might be quite extreme
CBR650r
Re: goo cheap cycle workshop stand
I've got an abba stand for my eMTB, it works a treat for doing things where you just need the bike held upright and the rear wheel an inch of the floor. I use it for day to day storage of the bike.Mr Moofo wrote: ↑Wed Jan 13, 2021 11:26 amI would have thought an ABBA stand would work best on an e-bikeBeancounter wrote: ↑Wed Jan 13, 2021 10:52 am I've got two stands, an older version of the Decathlon stand that Lostboy posted (mine has four legs instead of three) and a recently purchased Lifeline Pro Fork Mount.
https://www.wiggle.co.uk/lifeline-pro-f ... sJEALw_wcB
The Decathlon one was fine for road bikes but never really held mountain bikes at decent angle - the front wheel always dropped so the bike was in stoppie position. It did allow you to work on gears and helped with cleaning but was always spinning you needed the slightest bit of force on anything (bottom brackets for instance) so I'd end up loosening stuff with the bike on the floor and then lifting on to the stand. Became more of a PITA to use, hence the new purchase.
I chose the Lifeline stand because I've got an e-mtb and didn't fancy dangling it by the dropper post. Haven't tested in anger yet but it feels and looks more appropriate for my needs.
I don't think they make them any more, which is a shame
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2870 times
- Been thanked: 554 times
Re: goo cheap cycle workshop stand
I've got one lurking in the garage and if it was less of a PITA to use I'd have given it a shot.formula400 wrote: ↑Wed Jan 13, 2021 3:19 pmThink that might be quite extreme
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2870 times
- Been thanked: 554 times
Re: goo cheap cycle workshop stand
I think he was.Beancounter wrote: ↑Wed Jan 13, 2021 3:35 pmI thought Moofo was having a laugh about using an ABBA stand!
-
- Posts: 1009
- Joined: Sat Mar 14, 2020 1:20 pm
- Has thanked: 2870 times
- Been thanked: 554 times
Re: goo cheap cycle workshop stand
Taff wrote: ↑Wed Jan 13, 2021 4:14 pmI think he was.Beancounter wrote: ↑Wed Jan 13, 2021 3:35 pmI thought Moofo was having a laugh about using an ABBA stand!