good cheap cycle workshop stand

MTB, Road, Cyclocross, Running, walking, Rowing, Weights / Cardio, Diet, training plans
User avatar
formula400
Posts: 1732
Joined: Wed Apr 15, 2020 4:14 pm
Location: London
Has thanked: 444 times
Been thanked: 863 times

good cheap cycle workshop stand

Post by formula400 »

as above, I quite fancy a work stand for the cycles to make cleaning easier , nothing ££££ any recommendations on decent one at the cheaper end.
CBR650r :mrgreen:
User avatar
weeksy
Site Admin
Posts: 23421
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5451 times
Been thanked: 13087 times

Re: goo cheap cycle workshop stand

Post by weeksy »

I get the impression to an extent you get what you pay for. Mine was about £50, 2 feet type, stability isn't wonderful, but it's ok for most things, I get around most jobs on it. I wouldn't recommend it though, but have no idea what make it I'd anyway as it's about 10 years old.
lostboy
Posts: 840
Joined: Fri Aug 28, 2020 3:03 pm
Has thanked: 2156 times
Been thanked: 426 times

Re: goo cheap cycle workshop stand

Post by lostboy »

User avatar
MingtheMerciless
Posts: 3553
Joined: Wed Mar 18, 2020 7:42 am
Location: Scarfolk on Sea
Has thanked: 2942 times
Been thanked: 1883 times

Re: goo cheap cycle workshop stand

Post by MingtheMerciless »

Not much positive to add, I've a Bonty stand (which they don't make any more), it wasn't cheap. You have to be careful with the tripod positioning as otherwise it gets tippy, the tripod takes up a big area so its either outside or in the conservatory. Also the leg support struts ability to trap fingers make a 70's baby buggy look safe. I use it but only for big jobs or full strip downs.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
User avatar
Mr Moofo
Posts: 4620
Joined: Sat Mar 14, 2020 1:41 pm
Location: Brightonish
Has thanked: 1829 times
Been thanked: 1469 times

Re: goo cheap cycle workshop stand

Post by Mr Moofo »

I have a Park stand - it wasn’t cheap and it isn’t perfect. The clamp can freeze and need to be hit with a mallet. It’s. A two legged affair - and with a bike on it , it is stable.

Lidl / Aldi do them every now and again , and decathlon is normally a good shout
Beancounter
Posts: 1009
Joined: Sat Mar 14, 2020 1:20 pm
Has thanked: 2870 times
Been thanked: 554 times

Re: goo cheap cycle workshop stand

Post by Beancounter »

I've got two stands, an older version of the Decathlon stand that Lostboy posted (mine has four legs instead of three) and a recently purchased Lifeline Pro Fork Mount.

https://www.wiggle.co.uk/lifeline-pro-f ... sJEALw_wcB

The Decathlon one was fine for road bikes but never really held mountain bikes at decent angle - the front wheel always dropped so the bike was in stoppie position. It did allow you to work on gears and helped with cleaning but was always spinning you needed the slightest bit of force on anything (bottom brackets for instance) so I'd end up loosening stuff with the bike on the floor and then lifting on to the stand. Became more of a PITA to use, hence the new purchase.

I chose the Lifeline stand because I've got an e-mtb and didn't fancy dangling it by the dropper post. Haven't tested in anger yet but it feels and looks more appropriate for my needs.
Attachments
Lifeline_Pro_Fork_Mount_Bike_Workstand_01.jpg
Lifeline_Pro_Fork_Mount_Bike_Workstand_01.jpg (212.22 KiB) Viewed 1190 times
User avatar
Mr Moofo
Posts: 4620
Joined: Sat Mar 14, 2020 1:41 pm
Location: Brightonish
Has thanked: 1829 times
Been thanked: 1469 times

Re: goo cheap cycle workshop stand

Post by Mr Moofo »

Beancounter wrote: Wed Jan 13, 2021 10:52 am I've got two stands, an older version of the Decathlon stand that Lostboy posted (mine has four legs instead of three) and a recently purchased Lifeline Pro Fork Mount.

https://www.wiggle.co.uk/lifeline-pro-f ... sJEALw_wcB

The Decathlon one was fine for road bikes but never really held mountain bikes at decent angle - the front wheel always dropped so the bike was in stoppie position. It did allow you to work on gears and helped with cleaning but was always spinning you needed the slightest bit of force on anything (bottom brackets for instance) so I'd end up loosening stuff with the bike on the floor and then lifting on to the stand. Became more of a PITA to use, hence the new purchase.

I chose the Lifeline stand because I've got an e-mtb and didn't fancy dangling it by the dropper post. Haven't tested in anger yet but it feels and looks more appropriate for my needs.
I would have thought an ABBA stand would work best on an e-bike :D
Beancounter
Posts: 1009
Joined: Sat Mar 14, 2020 1:20 pm
Has thanked: 2870 times
Been thanked: 554 times

Re: goo cheap cycle workshop stand

Post by Beancounter »

Mr Moofo wrote: Wed Jan 13, 2021 11:26 am
I would have thought an ABBA stand would work best on an e-bike :D
Or this....
Attachments
BBER.jpg
BBER.jpg (340.04 KiB) Viewed 1178 times
Mussels
Posts: 4441
Joined: Mon Mar 16, 2020 9:02 pm
Has thanked: 836 times
Been thanked: 1239 times

Re: goo cheap cycle workshop stand

Post by Mussels »

I tried a cheap stand that looked just like the Park Tools one, it was rubbish and I took it back. I replaced it with Park Tools and the difference was huge.
I'm not one to splash out on branded stuff but this was worth it.
Beancounter
Posts: 1009
Joined: Sat Mar 14, 2020 1:20 pm
Has thanked: 2870 times
Been thanked: 554 times

Re: good cheap cycle workshop stand

Post by Beancounter »

If you're minded, and can find the right base, this build-your-own looks like a decent option:

https://www.youtube.com/watch?v=AKiqDUSmJZA

Or follow Blake's from GMBN set-up:

https://www.youtube.com/watch?v=1qHCmCnA_Ks&t=20s
crust
Posts: 550
Joined: Sun Mar 15, 2020 6:59 pm
Has thanked: 604 times
Been thanked: 515 times

Re: good cheap cycle workshop stand

Post by crust »

Don't get the Halfords one.

I bought one, it was crap and got crapper as bits wore or fell off and eventually the clamp snapped dropping my bike on the floor. :(
User avatar
formula400
Posts: 1732
Joined: Wed Apr 15, 2020 4:14 pm
Location: London
Has thanked: 444 times
Been thanked: 863 times

Re: goo cheap cycle workshop stand

Post by formula400 »

Beancounter wrote: Wed Jan 13, 2021 12:28 pm
Mr Moofo wrote: Wed Jan 13, 2021 11:26 am
I would have thought an ABBA stand would work best on an e-bike :D
Or this....
Think that might be quite extreme 😂😂😂
CBR650r :mrgreen:
Taff
Posts: 1129
Joined: Sun Apr 05, 2020 9:15 am
Has thanked: 255 times
Been thanked: 885 times

Re: goo cheap cycle workshop stand

Post by Taff »

Mr Moofo wrote: Wed Jan 13, 2021 11:26 am
Beancounter wrote: Wed Jan 13, 2021 10:52 am I've got two stands, an older version of the Decathlon stand that Lostboy posted (mine has four legs instead of three) and a recently purchased Lifeline Pro Fork Mount.

https://www.wiggle.co.uk/lifeline-pro-f ... sJEALw_wcB

The Decathlon one was fine for road bikes but never really held mountain bikes at decent angle - the front wheel always dropped so the bike was in stoppie position. It did allow you to work on gears and helped with cleaning but was always spinning you needed the slightest bit of force on anything (bottom brackets for instance) so I'd end up loosening stuff with the bike on the floor and then lifting on to the stand. Became more of a PITA to use, hence the new purchase.

I chose the Lifeline stand because I've got an e-mtb and didn't fancy dangling it by the dropper post. Haven't tested in anger yet but it feels and looks more appropriate for my needs.
I would have thought an ABBA stand would work best on an e-bike :D
I've got an abba stand for my eMTB, it works a treat for doing things where you just need the bike held upright and the rear wheel an inch of the floor. I use it for day to day storage of the bike.

I don't think they make them any more, which is a shame
Beancounter
Posts: 1009
Joined: Sat Mar 14, 2020 1:20 pm
Has thanked: 2870 times
Been thanked: 554 times

Re: goo cheap cycle workshop stand

Post by Beancounter »

formula400 wrote: Wed Jan 13, 2021 3:19 pm
Beancounter wrote: Wed Jan 13, 2021 12:28 pm
Mr Moofo wrote: Wed Jan 13, 2021 11:26 am
I would have thought an ABBA stand would work best on an e-bike :D
Or this....
Think that might be quite extreme 😂😂😂
I've got one lurking in the garage and if it was less of a PITA to use I'd have given it a shot. 😂
Beancounter
Posts: 1009
Joined: Sat Mar 14, 2020 1:20 pm
Has thanked: 2870 times
Been thanked: 554 times

Re: goo cheap cycle workshop stand

Post by Beancounter »

Taff wrote: Wed Jan 13, 2021 3:22 pm

I've got an abba stand for my eMTB, it works a treat for doing things where you just need the bike held upright and the rear wheel an inch of the floor. I use it for day to day storage of the bike.

I don't think they make them any more, which is a shame
I thought Moofo was having a laugh about using an ABBA stand!
Taff
Posts: 1129
Joined: Sun Apr 05, 2020 9:15 am
Has thanked: 255 times
Been thanked: 885 times

Re: goo cheap cycle workshop stand

Post by Taff »

Beancounter wrote: Wed Jan 13, 2021 3:35 pm
Taff wrote: Wed Jan 13, 2021 3:22 pm

I've got an abba stand for my eMTB, it works a treat for doing things where you just need the bike held upright and the rear wheel an inch of the floor. I use it for day to day storage of the bike.

I don't think they make them any more, which is a shame
I thought Moofo was having a laugh about using an ABBA stand!
I think he was. :lol:
Beancounter
Posts: 1009
Joined: Sat Mar 14, 2020 1:20 pm
Has thanked: 2870 times
Been thanked: 554 times

Re: goo cheap cycle workshop stand

Post by Beancounter »

Taff wrote: Wed Jan 13, 2021 4:14 pm
Beancounter wrote: Wed Jan 13, 2021 3:35 pm
Taff wrote: Wed Jan 13, 2021 3:22 pm

I've got an abba stand for my eMTB, it works a treat for doing things where you just need the bike held upright and the rear wheel an inch of the floor. I use it for day to day storage of the bike.

I don't think they make them any more, which is a shame
I thought Moofo was having a laugh about using an ABBA stand!
I think he was. :lol:
:lol: