Bikes from different markets...

Anything you like about motorbikes
User avatar
Horse
Posts: 11216
Joined: Sun Mar 15, 2020 11:30 am
Location: Always sunny southern England
Has thanked: 5945 times
Been thanked: 4932 times

Re: Bikes from different markets...

Post by Horse »

BMWs in the USA used to have 3 year warranty, when UK bikes were 1 year.

Oh what fun to be had on their stand at the bike show, asking whether it was possible to buy one to US spec as they must be better built :)
Even bland can be a type of character :wave:
A_morti
Posts: 722
Joined: Mon May 25, 2020 8:35 am
Location: Malta
Has thanked: 300 times
Been thanked: 541 times

Re: Bikes from different markets...

Post by A_morti »

G.P wrote: Fri Jan 01, 2021 5:54 pm
A_morti wrote: Fri Jan 01, 2021 5:10 pm This, though, is cool.
https://www.honda.co.jp/CBR250RR/
Its 168KG though, needs to way lighter than that.
Be nice if it were, but it's a couple of kg under a 250 ninja already, so I don't think it *needs* to.

24kg heavier than my cb300r, but it has an extra cylinder and 15hp odd more.
A_morti
Posts: 722
Joined: Mon May 25, 2020 8:35 am
Location: Malta
Has thanked: 300 times
Been thanked: 541 times

Re: Bikes from different markets...

Post by A_morti »

KungFooBob wrote: Fri Jan 01, 2021 9:47 pm The nips did a CBR750 back in the day too.

Image

It's like half way between the Jelly mould 600/1000F styling wise
Isn't that just a sleeved down cbr1000f for the USA market? I don't see any significant difference to the thousand anyway.
User avatar
Potter
Posts: 9664
Joined: Sat Mar 14, 2020 1:32 pm
Has thanked: 2216 times
Been thanked: 4611 times

Re: Bikes from different markets...

Post by Potter »

KungFooBob wrote: Fri Jan 01, 2021 9:47 pm The nips did a CBR750 back in the day too.

Image

It's like half way between the Jelly mould 600/1000F styling wise
My mate still has one I think, he had it as a work hack and used it every day in all weathers for years and years, he said it was ace.
When he sold all his other bikes (due to illness) he kept the CBR, couldn't bear to part with it, but I haven't talked to him about bikes for ages.
User avatar
G.P
Posts: 1944
Joined: Sun Mar 15, 2020 9:12 pm
Location: Wiltshire
Has thanked: 2113 times
Been thanked: 1310 times

Re: Bikes from different markets...

Post by G.P »

A_morti wrote: Sat Jan 02, 2021 5:12 am
G.P wrote: Fri Jan 01, 2021 5:54 pm
A_morti wrote: Fri Jan 01, 2021 5:10 pm This, though, is cool.
https://www.honda.co.jp/CBR250RR/
Its 168KG though, needs to way lighter than that.
Be nice if it were, but it's a couple of kg under a 250 ninja already, so I don't think it *needs* to.

24kg heavier than my cb300r, but it has an extra cylinder and 15hp odd more.
Yeah but look at it from the bigger bike perspective. a mid 90's Ducati 900ss is 10 kg heavier but has just under 80bhp. If you're not getting feather weight, you might as well have some horse power. The CBR250RR is twice the weight of a MotoGP bike :)
A_morti
Posts: 722
Joined: Mon May 25, 2020 8:35 am
Location: Malta
Has thanked: 300 times
Been thanked: 541 times

Re: Bikes from different markets...

Post by A_morti »

G.P wrote: Sat Jan 02, 2021 11:22 am a mid 90's Ducati 900ss is 10 kg heavier but has just under 80bhp.
Yeh... but nah.

The 900ss was 180kg dry. Quoted curb weights seem to be from 192kg-194kg, so it's 25kg heavier than the honda, not 10kg.

The 'more bhp' achievement isn't that impressive either, since the 250 has @165hp/litre while the 900ss is around half that.
User avatar
G.P
Posts: 1944
Joined: Sun Mar 15, 2020 9:12 pm
Location: Wiltshire
Has thanked: 2113 times
Been thanked: 1310 times

Re: Bikes from different markets...

Post by G.P »

165 bhp per litre is great but needs to be in a lightweight package for it to give real performance. its still only 42bhp. I'd still go for the relatively lightweight bigger capacity twin as its got different attributes
The modern answer is of course, KTM's 390. It pushes out around 42bhp, not a lot over 100bhp per litre but its only 149kg dry (allegedly) and with a motor that's got a much more friendly torque curve.

Were the Jap 250cc models just smaller bore versions of the JDM 400cc bikes?
User avatar
Yorick
Posts: 16278
Joined: Sat Mar 14, 2020 8:20 pm
Location: Paradise
Has thanked: 10113 times
Been thanked: 6649 times

Re: Bikes from different markets...

Post by Yorick »

My Husky weighs about 105 Kgs and has 45 gee gees.

It's proper mental :D
Mr. Dazzle
Posts: 13488
Joined: Mon Mar 16, 2020 7:57 pm
Location: Milton Keynes
Has thanked: 2611 times
Been thanked: 6014 times

Re: Bikes from different markets...

Post by Mr. Dazzle »

The Zero S is 59bhp and 142kg at the kerb...

Rather large elephant in the room.
User avatar
weeksy
Site Admin
Posts: 22950
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5503 times
Been thanked: 12760 times

Re: Bikes from different markets...

Post by weeksy »

Mr. Dazzle wrote: Sat Jan 02, 2021 4:11 pm The Zero S is 59bhp and 142kg at the kerb...

Rather large elephant in the room.
And costs a lot more than £4500 KTM 390
A_morti
Posts: 722
Joined: Mon May 25, 2020 8:35 am
Location: Malta
Has thanked: 300 times
Been thanked: 541 times

Re: Bikes from different markets...

Post by A_morti »

G.P wrote: Sat Jan 02, 2021 4:03 pm Were the Jap 250cc models just smaller bore versions of the JDM 400cc bikes?
The old CBRs back in the day were sort of that. Plus a different swing arm, single disc front end, lighter / narrower wheels etc., But basically the same animal.

That's not a bad thing though. They were all phenomenal in terms of tech for the day, and you got all that all packed into a 250cc bike for licensing reasons only. Much like the zx25r of today.
Bigjawa
Posts: 1881
Joined: Mon Jun 01, 2020 10:54 pm
Location: Ballymena Co. Antrim
Has thanked: 223 times
Been thanked: 842 times

Re: Bikes from different markets...

Post by Bigjawa »

A_morti wrote: Sat Jan 02, 2021 9:36 pm
G.P wrote: Sat Jan 02, 2021 4:03 pm Were the Jap 250cc models just smaller bore versions of the JDM 400cc bikes?
The old CBRs back in the day were sort of that. Plus a different swing arm, single disc front end, lighter / narrower wheels etc., But basically the same animal.

That's not a bad thing though. They were all phenomenal in terms of tech for the day, and you got all that all packed into a 250cc bike for licensing reasons only. Much like the zx25r of today.
The 90s 250s were all separate from the 400s, the wee Honda especially was a gorgeous thing that redlined at 19k. I'm pretty sure they all had twin discs too. The budget stuff was the suspension, it was all basically set up from the factory for a 9yo girl.

I rode the Honda back when I had an RGV and was like comparing Champagne to Lambrini. The RGV was better in every department.