'83 GPz750-A1 malarkey.

Discussions and updates on your new bike, your new build, your wishes, wants and desires
Post Reply
User avatar
ZRX61
Posts: 8939
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 2253 times
Been thanked: 2634 times

Re: '83 GPz750-A1 malarkey.

Post by ZRX61 »

Today's malarky... Rusty fairing hardware spent a night in the Evaporust. I'm missing two of the dome nuts, two of the countersunk screws & one of the washers.
Dome nuts will likely get replaced by 10mm Nylocs anyway (there's a bunch of dome nuts on both GPz's)
The two screws are from the mirror mounts & I may have spares.. I've got a few spare mirrors for parts
& the 4th washer was here.... until I dropped it in the garage last night causing it to teleport to another dimension... bugger.
IMG_20260707_082846519.jpg
IMG_20260707_082846519.jpg (1.91 MiB) Viewed 55 times
Top
User avatar
ZRX61
Posts: 8939
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 2253 times
Been thanked: 2634 times

Re: '83 GPz750-A1 malarkey.

Post by ZRX61 »

This crack closes up when manipulated, so it will be getting a hot staple or two on the back side. Picked up a 50W hot stapler from Horrible Fright for a pittance. The reviews of the 100W versions on Amazon were all over the place & the 200W jobbie had even worse reviews.
Got a lot of sanding to make those stress cracks disappear... I see a lime green rattle can in my future...
IMG_20260707_091305192.jpg
IMG_20260707_091305192.jpg (1.24 MiB) Viewed 44 times
IMG_20260707_091352085.jpg
IMG_20260707_091352085.jpg (1.62 MiB) Viewed 44 times
Top
User avatar
ZRX61
Posts: 8939
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 2253 times
Been thanked: 2634 times

Re: '83 GPz750-A1 malarkey.

Post by ZRX61 »

Crikey, found some bloke in the US who made some exact replicas of the tank/seat bracket doodad! Hope he has some left as he made them a few years ago...
Top
User avatar
ZRX61
Posts: 8939
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 2253 times
Been thanked: 2634 times

Re: '83 GPz750-A1 malarkey.

Post by ZRX61 »

Fired up the hot stapler. Thank fuck I didn't get the 100w or 200w versions...
First attempt I managed to put the staple right through the fairing. Reheated it & removed that one... started over, got the hang of it by end... two wrigglies, two wavies. Probably should have used four wavies.
and should have used those visegrips instead of trying to hold the crack closed with one hand when I put that first one through the fairing.


No biggie, short, but steep, learning curve is all.
IMG_20260707_101114281.jpg
IMG_20260707_101114281.jpg (2.19 MiB) Viewed 32 times
IMG_20260707_101143624.jpg
IMG_20260707_101143624.jpg (2.03 MiB) Viewed 32 times
IMG_20260707_101646746.jpg
IMG_20260707_101646746.jpg (1.93 MiB) Viewed 32 times
Top
User avatar
ZRX61
Posts: 8939
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 2253 times
Been thanked: 2634 times

Re: '83 GPz750-A1 malarkey.

Post by ZRX61 »

Fairing gubbins after a session in the tumbler...
IMG_20260707_112646458.jpg
IMG_20260707_112646458.jpg (1.73 MiB) Viewed 15 times
Top
Post Reply

Return to “Projects, Owners Bikes, Updates”