so I pulled a sneaky 
removed the three brake calipers & the m/c from the bars 
then left before he got back. 
'83 GPz750-A1 malarkey.
-
ZRX61
- Posts: 8817
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 2217 times
- Been thanked: 2588 times
Re: '83 GPz750-A1 malarkey.
Visited the GPz, mate wasn't there but the bike was outside.. so I pulled a sneaky removed the three brake calipers & the m/c from the bars then left before he got back.
so I pulled a sneaky removed the three brake calipers & the m/c from the bars then left before he got back. -
ZRX61
- Posts: 8817
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 2217 times
- Been thanked: 2588 times
Re: '83 GPz750-A1 malarkey.
Fresh pile of crap to overhaul/IRAN.
That front m/c might be toast, but will assess after it comes apart.
- IMG_20260623_181026716.jpg (583.36 KiB) Viewed 31 times
That front m/c might be toast, but will assess after it comes apart.
-
ZRX61
- Posts: 8817
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 2217 times
- Been thanked: 2588 times
Re: '83 GPz750-A1 malarkey.
Arsebiscuits. The difference is in the lower fork legs....
But! I did find EBC 270mm front rotors for $170 each. Haven't bitten that bullet yet
Need to have a major garage tidy up/sort out tomorrow & then finish assembling the carb rack. Found an errant float needle laying on the garage floor this evening.
It had better be from the spare rack (which was laying on the floor with the bowls & floats removed a few days ago). I'll check the spare rack tomorrow. FFS
But! I did find EBC 270mm front rotors for $170 each. Haven't bitten that bullet yet
Need to have a major garage tidy up/sort out tomorrow & then finish assembling the carb rack. Found an errant float needle laying on the garage floor this evening.
It had better be from the spare rack (which was laying on the floor with the bowls & floats removed a few days ago). I'll check the spare rack tomorrow. FFS