No tug boats available, luckily I had the entire parking lot to myself. Those two vehicles leaving were in the next parking lot.
The F350 Thread
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
Guide-coated & blocked out 5 pieces of the fiberglass with #220 dry. The pieces are now much straighter & ripple free. Threw some primer on the 4 smaller pieces.
Identified some spots on the back that need repair/reinforcement, but that won't impact the work on the front sides.
Will finish the two bigger pieces to this stage on Friday.
Once all 6 pieces are done to primer stage I'll guide coat again & prep with #400 wet.
Brackets are done...
Identified some spots on the back that need repair/reinforcement, but that won't impact the work on the front sides.
Will finish the two bigger pieces to this stage on Friday.
Once all 6 pieces are done to primer stage I'll guide coat again & prep with #400 wet.
Brackets are done...
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
Discovered that owing to the water based crap paint, I have to prep to #800 wet. Right now I'm at #320 dry on some parts, #220 dry on others #400 wet on one piece.
Checked the W&D stash.. #180, #240, #320, #400, #500, #600, #1000, #1200, #1500. #2000, #3000....but no #800
Arsebiscuits.
Will be sanding on the parts outside when I can work in the shade later in the day. Ordered some #800, will be here tomorrow.
Checked the W&D stash.. #180, #240, #320, #400, #500, #600, #1000, #1200, #1500. #2000, #3000....but no #800
Arsebiscuits.
Will be sanding on the parts outside when I can work in the shade later in the day. Ordered some #800, will be here tomorrow.
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
-
- Posts: 2496
- Joined: Mon Mar 16, 2020 7:37 pm
- Location: Layer-de-la-Haye
- Has thanked: 2209 times
- Been thanked: 1225 times
-
- Posts: 13607
- Joined: Mon Mar 16, 2020 7:57 pm
- Location: Milton Keynes
- Has thanked: 2511 times
- Been thanked: 6059 times
Re: The F350 Thread
Sold!v8-powered wrote: ↑Tue Sep 17, 2024 6:25 pm Just saw this - https://www.hagerty.com/marketplace/auc ... 719b425715
-
- Posts: 2496
- Joined: Mon Mar 16, 2020 7:37 pm
- Location: Layer-de-la-Haye
- Has thanked: 2209 times
- Been thanked: 1225 times
Re: The F350 Thread
If i were that side of the pond, I'd be bidding!Mr. Dazzle wrote: ↑Tue Sep 17, 2024 6:29 pmSold!v8-powered wrote: ↑Tue Sep 17, 2024 6:25 pm Just saw this - https://www.hagerty.com/marketplace/auc ... 719b425715
-
- Posts: 13607
- Joined: Mon Mar 16, 2020 7:57 pm
- Location: Milton Keynes
- Has thanked: 2511 times
- Been thanked: 6059 times
Re: The F350 Thread
It's the fact that a full sized VHS player doesn't absurdly huge which makes me laugh.
Oh and the fact it's installed in an 1990s MFI coffee table/hi-fi unit.
Oh and the fact it's installed in an 1990s MFI coffee table/hi-fi unit.
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
I notice they didn't include a pic of the underside of the dash. Centurion conversions are known for absolute birds nests of wiring (altho my Waldoch isn't much better)
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
Header/expansion tank swapped out. Known issue after 3 decades, they split at the seam.
The leaker:
The non-leaker:
The leaker:
The non-leaker:
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
-
- Posts: 4773
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2549 times
- Count Steer
- Posts: 11500
- Joined: Mon Jul 19, 2021 4:59 pm
- Has thanked: 6234 times
- Been thanked: 4641 times
- MingtheMerciless
- Posts: 3492
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2897 times
- Been thanked: 1859 times
Re: The F350 Thread
You want to fit one of those fake EV charging ports so you can abandon it if front of half a dozen Tesla chargers
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
Ended up in a fucking parade stuck behind a food truck coming out of the mountains. Had a FTS moment & went from P5 to P1. Only other vehicle to go for it was an F250 back in P9...
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
Removed, cleaned, painted & reinstalled the inspection cover on the (E4OD) trans. Used the same Steel-It paint I used for the rear axle, brake plates & pumpkin.
Before:
After:
Before:
After:
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
and one of the spoof car pool lane pass stickers...MingtheMerciless wrote: ↑Sun Sep 22, 2024 3:37 pm You want to fit one of those fake EV charging ports so you can abandon it if front of half a dozen Tesla chargers
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times
Re: The F350 Thread
Lost my damn mind today... First you have to realize I'm home alone & unsupervised all week...
Started with a minor project involving the Griots G8 3in polisher/buffer to remove a couple of scratches by the lock on the drivers door...
Then...
I rolled under the truck & polished the oil pan...
and the bottom of the oil filter...
Started with a minor project involving the Griots G8 3in polisher/buffer to remove a couple of scratches by the lock on the drivers door...
Then...
I rolled under the truck & polished the oil pan...
and the bottom of the oil filter...
- ZRX61
- Posts: 4913
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1430 times
- Been thanked: 1351 times