Tool purchases

[MrLongbeard]

I can't see why you'd need 2 grinding discs

1 coarse, 1 fine for sharpening edges.

[Yorick]

I can't see why you'd need 2 grinding discs

1 coarse, 1 fine for sharpening edges.

I just use it to grind. Nothing subtle here

[cheb]

See my post back up there as to why I have more than one grinder.

[Felix]

It does say in the advert "2 pre-mounted 75mm diameter and 20mm wide discs (1 grinding disc, 1 polishing disc)

[KungFooBob]

I need to post a correction, it's does have pre-drilled mounting holes. I need to go to spec savers.

[Count Steer]

Poor obs.

[Rockburner]

I need to post a correction, it's does have pre-drilled mounting holes. I need to go to spec savers.

Presumably pre-tapped holes in cast lugs in the base? (I bet they're Cycle thread..... )

[ZRX61]

I can't see why you'd need 2 grinding discs.

For the same reason you don't put a fine edge on a wood chisel with a concrete paver.

[Yorick]

I can't see why you'd need 2 grinding discs.

For the same reason you don't put a fine edge on a wood chisel with a concrete paver.

Eh?

[dern]

I've only played with this for 5 minutes but this is my new favourite tool...

saw.jpg (125.81 KiB) Viewed 1036 times

It's a milwaukee cordless m12 portable bandsaw. Definitely didn't need it as I have a hacksaw but it cuts through steel and aluminium like butter. It cut that steel box section in a couple of seconds. Very pleased indeed and will definitely make cutting metal less painful (arthritis in fingers).

I've a few M12 milwaukee tools now and very impressed with all of them.

[Druid]

If anyone else wants a £25 bench grinder (should be £50)....I've got one and it's fine.

https://www.screwfix.com/p/titan-ttb905 ... 240v/549vv

Look what you made me do

[Silly Car]

I've only played with this for 5 minutes but this is my new favourite tool...


saw.jpg

It's a milwaukee cordless m12 portable bandsaw. Definitely didn't need it as I have a hacksaw but it cuts through steel and aluminium like butter. It cut that steel box section in a couple of seconds. Very pleased indeed and will definitely make cutting metal less painful (arthritis in fingers).

I've a few M12 milwaukee tools now and very impressed with all of them.

My nephew, apprentice electrician, loves his M12 kit, the cut off saw and heated jacket are particularly good. He barely picks his M18 kit up these days as the M12 is as capable as the higher voltage kit whilst being much lighter for all day use.

[demographic]

Cordless 1/2" router...


Oh, were you expecting it to be battery powered? It's definitely cordless though.

[MrLongbeard]

One of those came up in a video I watched yesterday.



Don't fret if you can't watch all of it, he / his style is an acquired taste

[demographic]

One of those came up in a video I watched yesterday.



Don't fret if you can't watch all of it, he / his style is an acquired taste

Watched it the other day, interesting build (although after watching three versions of the tambour door I ran out of time and went to work) with some amazing details.

I could get bored with hin chuntering on about tattoos mind.

[Rockburner]

Not "purchases", per se..... but on Sunday I picked up a few things from my Dad's old workshop....

These Draper socket sets were always in disarray when my Dad was working on something... but even after what must be at least 40 years now... there's only 3 sockets missing from the 3/8" set! (the 9,12,14 mm sockets and a couple of extensions)





The 1/2" set is complete.


A load of taps and dies : mostly imperial, but there were a few metrics as well






And this:


it weighs a metric fuckton.... empty!

This is probably why:



The only reason I grabbed it is because the missus wants it for her leatherworking tools.

[mangocrazy]

Ordered a pair of Knipex Pliers/Wrenches in 150mm and 250mm sizes. These are the 150mm ones:

https://toolstoredirect.co.uk/products/knipex-86-05-150

[ZRX61]

Not "purchases", per se..... but on Sunday I picked up a few things from my Dad's old workshop....

These Draper socket sets were always in disarray when my Dad was working on something... but even after what must be at least 40 years now... there's only 3 sockets missing from the 3/8" set! (the 9,12,14 mm sockets and a couple of extensions)

https://www.ebay.com/itm/235686627496?_ ... R7qsmt3fZA


https://www.ebay.com/itm/332838377989?_ ... R7ysmt3fZA

https://www.ebay.com/itm/335521029305?_ ... R76smt3fZA

[Rockburner]

Not "purchases", per se..... but on Sunday I picked up a few things from my Dad's old workshop....

These Draper socket sets were always in disarray when my Dad was working on something... but even after what must be at least 40 years now... there's only 3 sockets missing from the 3/8" set! (the 9,12,14 mm sockets and a couple of extensions)

https://www.ebay.com/itm/235686627496?_ ... R7qsmt3fZA


https://www.ebay.com/itm/332838377989?_ ... R7ysmt3fZA

https://www.ebay.com/itm/335521029305?_ ... R76smt3fZA

Yeah, i could. But I've got plenty of 3/8s stuff already.

In fact, it's quite possible that i have those very sockets somewhere in my toolboxes already.