Gear change problems

[Yorick]

Oooh. Don't come in here much..

Anyway, the gear change thingy stopped working on my last ride.
The push thingies both work OK, just the cable has become detached from the mechanism.
I'm sure I can fix it, just need to know what's wrong.
Can't see any way of securing the cable or getting it back into the little black thing in my hand which goes into a hole in the mechanism.
Has a bit dropped off?

Help

20240415_165435.jpg (1.4 MiB) Viewed 271 times

20240415_165510.jpg (1.39 MiB) Viewed 271 times

20240415_165518.jpg (1011.2 KiB) Viewed 271 times

[Ditchfinder]

Comes in ere asking for help with his dusty bike bits - Good God man have you no Humanity - we haven't see the sun here since last June and have started growing gills !!!!

See the hole by your index finger that where the cable goes through - if you do that and trace a straight line you should see a threaded hole with a bolt and a .5cm square cable clamp. If you cant's see a 4mm head allen bolt (short) and cable clamp then you will have lost them or the bit with the threaded hole may have snapped off.

Probably should look like this: assuming it's 9 speed or maybe early 10 speed.

Clamp and bolt are available as spares though.

[Ditchfinder]

Maybe it is this mech: and where the clamp and bolt go is behind your middle finger in top photo

[Yorick]

Looks like I've lost something and cable is frayed and won't go into the hole.

I'll nip it up to local shop. I don't know what I need, so will be simpler to give it to him

Cheers

[Ditchfinder]

Be about 10 euro for a clamp and bolt - get him to replace the cable at the same time - it looks fubarred. 10 mins of a job.

[MingtheMerciless]

No mud on that bike @weeksy, BAN HIM!

[Yorick]

No mud on that bike @weeksy, BAN HIM!

Don't have mud here

[weeksy]

You appear to have rust

[Yorick]

You appear to have rust

My brother owned it in UK for many years.

[mboy]

Full new inner and outer cable, it's not worth replacing one or the other on its own... Should be about £10-15 plus any labour charge in a bike shop and be running good as new again.

[Yorick]

Full new inner and outer cable, it's not worth replacing one or the other on its own... Should be about £10-15 plus any labour charge in a bike shop and be running good as new again.

I dropped it off at the local bike shop.

[Yorick]

Full new inner and outer cable, it's not worth replacing one or the other on its own... Should be about £10-15 plus any labour charge in a bike shop and be running good as new again.

I dropped it off at the local bike shop.

€12.50

[DefTrap]

I hate fecking derailleurs.