Shed/Workshop alarm systems
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Shed/Workshop alarm systems
Anyone got one? Could recommend one?
My workshop is not attached to the house, but does have mains electricity: but all I really want is a very very loud alarm that goes off if anyone gets inside (which is now hopefully a lot harder to achieve than before...)
My workshop is not attached to the house, but does have mains electricity: but all I really want is a very very loud alarm that goes off if anyone gets inside (which is now hopefully a lot harder to achieve than before...)
non quod, sed quomodo
- MingtheMerciless
- Posts: 3552
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2941 times
- Been thanked: 1882 times
Re: Shed/Workshop alarm systems
Blank shotgun cartridge trip wire alarm, by fook are they loud. The flash is a bit disconcerting as well. I've set mine off a few times by mistake, I normally have a nano second warning as I feel the trip wire go tight across my shin before all hell lets loose.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
- wheelnut
- Posts: 2229
- Joined: Mon Mar 16, 2020 4:36 pm
- Has thanked: 907 times
- Been thanked: 1001 times
Re: Shed/Workshop alarm systems
Can you integrate it into your house alarm? Our alarm is wireless and although the garage is detached and 20m from the house it works fine, There’s a PIR, a sound bomb and a separate bell box on the outside of the garage,
- ZRX61
- Posts: 5158
- Joined: Tue Mar 17, 2020 4:05 pm
- Location: Solar Blight Valley
- Has thanked: 1507 times
- Been thanked: 1412 times
Re: Shed/Workshop alarm systems
Pressure pad on the floor just inside the door, Pressure sensors on windows etc, both connected to strobes (external) & sirens.
If you forget to disarm the system, I can guarantee you'll only do it once...
If you forget to disarm the system, I can guarantee you'll only do it once...
Re: Shed/Workshop alarm systems
If your shed/workshop has internet you might consider smart home devices.
I use TP-Link Tapo devices, you can set cameras, motion detectors and door/window contacts events to activate
smart plugs and turn on what you like. You can also link some of them to alexa or google home, plus you get event notifications on your mobile phone.
I use TP-Link Tapo devices, you can set cameras, motion detectors and door/window contacts events to activate
smart plugs and turn on what you like. You can also link some of them to alexa or google home, plus you get event notifications on your mobile phone.
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Re: Shed/Workshop alarm systems
No, unfortunately there's a public road between the buildings. (we own two plots of land, either side of the road).
non quod, sed quomodo
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Re: Shed/Workshop alarm systems
We're not into smart devices (call me a luddite if you like), but thanks for mentioning a brand name to investigate if we ever go down that route (IIRC our 4G router is TP-link)Eclipse wrote: ↑Thu Apr 04, 2024 7:20 am If your shed/workshop has internet you might consider smart home devices.
I use TP-Link Tapo devices, you can set cameras, motion detectors and door/window contacts events to activate
smart plugs and turn on what you like. You can also link some of them to alexa or google home, plus you get event notifications on your mobile phone.
non quod, sed quomodo
-
- Posts: 4905
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2616 times
Re: Shed/Workshop alarm systems
How does the power get to the shed? Is there a duct under the road you could feed a wire through?
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Re: Shed/Workshop alarm systems
err - an armoured cable fed under a culvert (that's 99% full of mud/water 90% of the year) by (presumably) the previous owner of the house. It's one those "spur off a spur off a spur" arrangements and there's a domestic distribution box somewhere in there as well so a network-extension plug very likely won't work (although I've not tried one...).
TBH I'm looking for a simple "fit and forget" system that will just set off a loud alarm if tinkered with - anything overly complex involving networks or wifi or 3g or whatever isn't what I'm looking for.
non quod, sed quomodo
-
- Posts: 4905
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2616 times
Re: Shed/Workshop alarm systems
I was thinking you could run a cable through it and connect the shed to the house alarm as a separate zone.
It may not be possible, I know very little about alarms.
It may not be possible, I know very little about alarms.
- KungFooBob
- Posts: 14197
- Joined: Sat Mar 14, 2020 1:04 pm
- Location: The content of this post is not AI generated.
- Has thanked: 539 times
- Been thanked: 7526 times
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Re: Shed/Workshop alarm systems
Good idea..... if we had a house alarm...
(We have had a company come round, but since the guy seems to be allergic to answering simple questions from prospective clients we're looking elsewhere).
non quod, sed quomodo
-
- Posts: 4905
- Joined: Tue Mar 17, 2020 6:51 am
- Been thanked: 2616 times
- Count Steer
- Posts: 11805
- Joined: Mon Jul 19, 2021 4:59 pm
- Has thanked: 6376 times
- Been thanked: 4751 times
Re: Shed/Workshop alarm systems
The bigger companies all seem more interested in getting you on a maintenance contract than the actual alarm installation. Ours was installed and supported by a local company until they got bought out by a national one. The new lot made a 'courtesy call' ie a sales visit wanting to sell me a new system (and new maintenance contract) for some ridiculous £sum. As far as I could make out it sounded just like one of the self-install, wireless systems you can buy from Screwfix etc for 1/3rd the price. So I cancelled the existing contract. (I can replace a back-up battery every few years myself ta v much).Rockburner wrote: ↑Thu Apr 04, 2024 1:01 pmGood idea..... if we had a house alarm...
(We have had a company come round, but since the guy seems to be allergic to answering simple questions from prospective clients we're looking elsewhere).
Something like this would probably suffice.
https://www.screwfix.com/p/yale-hsa-ess ... -kit/344jf
Doubt is not a pleasant condition.
But certainty is an absurd one.
Voltaire
But certainty is an absurd one.
Voltaire
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Re: Shed/Workshop alarm systems
Oddly enough - that system is exactly the one I've been looking at and wondering if it's any good. (All I'd want is a 2nd door sensor to add to it).Count Steer wrote: ↑Thu Apr 04, 2024 1:51 pmThe bigger companies all seem more interested in getting you on a maintenance contract than the actual alarm installation. Ours was installed and supported by a local company until they got bought out by a national one. The new lot made a 'courtesy call' ie a sales visit wanting to sell me a new system (and new maintenance contract) for some ridiculous £sum. As far as I could make out it sounded just like one of the self-install, wireless systems you can buy from Screwfix etc for 1/3rd the price. So I cancelled the existing contract. (I can replace a back-up battery every few years myself ta v much).Rockburner wrote: ↑Thu Apr 04, 2024 1:01 pmGood idea..... if we had a house alarm...
(We have had a company come round, but since the guy seems to be allergic to answering simple questions from prospective clients we're looking elsewhere).
Something like this would probably suffice.
https://www.screwfix.com/p/yale-hsa-ess ... -kit/344jf
non quod, sed quomodo
- Count Steer
- Posts: 11805
- Joined: Mon Jul 19, 2021 4:59 pm
- Has thanked: 6376 times
- Been thanked: 4751 times
Re: Shed/Workshop alarm systems
Well, I guess you can put the alarm where you (and thieving scrotes) can hear it and out of their reach. Main issue for me is actually the battery operation. I'd assume (but don't know) that you monitor the battery state via an app but it still means you need to keep on top of it...which I probably wouldn't ).Rockburner wrote: ↑Thu Apr 04, 2024 2:48 pmOddly enough - that system is exactly the one I've been looking at and wondering if it's any good. (All I'd want is a 2nd door sensor to add to it).Count Steer wrote: ↑Thu Apr 04, 2024 1:51 pmThe bigger companies all seem more interested in getting you on a maintenance contract than the actual alarm installation. Ours was installed and supported by a local company until they got bought out by a national one. The new lot made a 'courtesy call' ie a sales visit wanting to sell me a new system (and new maintenance contract) for some ridiculous £sum. As far as I could make out it sounded just like one of the self-install, wireless systems you can buy from Screwfix etc for 1/3rd the price. So I cancelled the existing contract. (I can replace a back-up battery every few years myself ta v much).Rockburner wrote: ↑Thu Apr 04, 2024 1:01 pm
Good idea..... if we had a house alarm...
(We have had a company come round, but since the guy seems to be allergic to answering simple questions from prospective clients we're looking elsewhere).
Something like this would probably suffice.
https://www.screwfix.com/p/yale-hsa-ess ... -kit/344jf
Doubt is not a pleasant condition.
But certainty is an absurd one.
Voltaire
But certainty is an absurd one.
Voltaire
- Rockburner
- Posts: 4375
- Joined: Sun Mar 15, 2020 11:06 am
- Location: Hiding in your blind spot
- Has thanked: 7814 times
- Been thanked: 2527 times
Re: Shed/Workshop alarm systems
I think on the non-connected systems the battery status (when low) is shown by flashing leds on the components (or something).Count Steer wrote: ↑Thu Apr 04, 2024 2:57 pmWell, I guess you can put the alarm where you (and thieving scrotes) can hear it and out of their reach. Main issue for me is actually the battery operation. I'd assume (but don't know) that you monitor the battery state via an app but it still means you need to keep on top of it...which I probably wouldn't ).Rockburner wrote: ↑Thu Apr 04, 2024 2:48 pmOddly enough - that system is exactly the one I've been looking at and wondering if it's any good. (All I'd want is a 2nd door sensor to add to it).Count Steer wrote: ↑Thu Apr 04, 2024 1:51 pm
The bigger companies all seem more interested in getting you on a maintenance contract than the actual alarm installation. Ours was installed and supported by a local company until they got bought out by a national one. The new lot made a 'courtesy call' ie a sales visit wanting to sell me a new system (and new maintenance contract) for some ridiculous £sum. As far as I could make out it sounded just like one of the self-install, wireless systems you can buy from Screwfix etc for 1/3rd the price. So I cancelled the existing contract. (I can replace a back-up battery every few years myself ta v much).
Something like this would probably suffice.
https://www.screwfix.com/p/yale-hsa-ess ... -kit/344jf
I wouldn't want the app-enabled one - it means having a 3G connection which is added cost for something I wouldn't find useful.
non quod, sed quomodo