Bike logos, badges, etc.

All 3D designs, prints, memorabilia from Screwdriver
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

I can make a template for you to cut out and test.

The confusion is in LDV, MAXUS and Convoy.

Do you mean the current one you don't want is LDV and they changed that from MAXUS which you also don't want but you want to try and squeeze the word "Convoy" into that space?
“No one is more hated than he who speaks the truth.”
Plato
Felix
Posts: 3828
Joined: Sat Jul 17, 2021 12:34 am
Has thanked: 467 times
Been thanked: 1390 times

Re: Bike logos, badges, etc.

Post by Felix »

Screwdriver wrote: Thu Jun 08, 2023 10:58 pm I can make a template for you to cut out and test.

The confusion is in LDV, MAXUS and Convoy.

Do you mean the current one you don't want is LDV and they changed that from MAXUS which you also don't want but you want to try and squeeze the word "Convoy" into that space?
Yes sorry. The silver LDV/Maxus is just to show you what they did with the later motors to cheer up the badge. I have both the Maxus and Convoy. I am looking for a badge for the Convoy.

I think i want do change LDV to Convoy that should look better. The right if the badge recess on the grill already had a Y angle but, I was thinking a font called Kashmir as i am a bit of a Led Zep fan. Its probably the closest font to the Led Zeppelin logo font but i cant get it bold enough (See Pic) using paint.net. It does not have to be white over red if you think some other colours would work. If you think it may look better with the Swan song record label logo in it somewhere then great i am just not all that artistic enough to put it down as print using pain.net type software.
Kashmir.jpg
Kashmir.jpg (57.56 KiB) Viewed 4205 times
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

Awesome, huge Led Zip fan here too.

I'll have a crack at a design...

After I finish printing this:

Image

Image

Grab bucket powered only by gravity!

No idea if it will work in plastic.
“No one is more hated than he who speaks the truth.”
Plato
Felix
Posts: 3828
Joined: Sat Jul 17, 2021 12:34 am
Has thanked: 467 times
Been thanked: 1390 times

Re: Bike logos, badges, etc.

Post by Felix »

No great hurry. Its never had a badge for the three years i have owned the thing :lol:
User avatar
Taipan
Posts: 13453
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15476 times
Been thanked: 9970 times

Re: Bike logos, badges, etc.

Post by Taipan »

I've been watching Kindig Customs on the TV. 3D printing has revolutionized the custom world in some way. They made up an airfilter housing last night. The guy scanned the engine bay, in particular the supercharger carbs and linkage and then was able to design one that would fit in the limited space. The head dbloke, Mr Kindig said it was so simple he felt like he was cheating!! Awesome tech!
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

Amazing what you can do with a 3d printer.

I designed and printed this grab bucket, copied off a YouTube video.

Image

Incredibly it works! Sort of.

Turns out what it really needs is a scale model chain... Video to follow. Mechanisms are where it's at with 3d prints but with the correct design, would make perfectly acceptable custom bike parts.
“No one is more hated than he who speaks the truth.”
Plato
User avatar
Count Steer
Posts: 11513
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6242 times
Been thanked: 4656 times

Re: Bike logos, badges, etc.

Post by Count Steer »

Screwdriver wrote: Thu Jun 15, 2023 9:33 am Amazing what you can do with a 3d printer.

I designed and printed this grab bucket, copied off a YouTube video.

Image

Incredibly it works! Sort of.

Turns out what it really needs is a scale model chain... Video to follow. Mechanisms are where it's at with 3d prints but with the correct design, would make perfectly acceptable custom bike parts.
Yup. See the Yamaha Tenere thread for an example of just that. :thumbup:
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

I nicked this one off Thingiverse:


Image

Fully functional LARGE ball mount. Steel bolt running through the stem. PETG is tough as fuck, it won't break.
“No one is more hated than he who speaks the truth.”
Plato
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

Took a bit of effort but an interesting mechanism.



...and it works!
“No one is more hated than he who speaks the truth.”
Plato
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

Quite happy with this model and the metrics are also interesting.

Two likes here.
1 view in Twitter (probably me!)
15 views on YouTube )most of them me!)

4.3 thousand views on Reddit!

That's in 1 hour...
“No one is more hated than he who speaks the truth.”
Plato
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

Over SEVENTY THOUSAND views on Reddit.

If that was YouTube views, I'd be making sensible money...
“No one is more hated than he who speaks the truth.”
Plato
User avatar
Noggin
Posts: 7779
Joined: Thu Mar 19, 2020 1:46 pm
Location: Ski Resort
Has thanked: 15737 times
Been thanked: 3788 times

Re: Bike logos, badges, etc.

Post by Noggin »

@Screwdriver - a bit of a random question!

Do you think you could 3D print an 'expansion tank' for a Ford Capri 2.8l (1980's but don't have the exact date)


Like I say, random! Partly cos I have no idea how much pressure it would be under (would it?!) but it was a conversation at an old car rally and some of the guys are really struggling to find original ones so I said I'd ask you as you can probably work out what it needs to be made of and if it's possible?!


If you think it might be, I will ask for my mates contact info and put you guys in touch :D
Life is for living. Buy the shoes. Eat the cake. Ride the bikes. Just, ride the bikes!! :bblonde:
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

Yes I should think so. I'd have to come up with some engineered solution for all the inlets/outlets but 3D printed in PETG would be water tight and good for up to say 70°C.

Devil of a job and I'd need to sell half a dozen to make it cost effective, depending on just how much they might sell for.
“No one is more hated than he who speaks the truth.”
Plato
User avatar
Noggin
Posts: 7779
Joined: Thu Mar 19, 2020 1:46 pm
Location: Ski Resort
Has thanked: 15737 times
Been thanked: 3788 times

Re: Bike logos, badges, etc.

Post by Noggin »

Screwdriver wrote: Tue Aug 15, 2023 1:12 pm Yes I should think so. I'd have to come up with some engineered solution for all the inlets/outlets but 3D printed in PETG would be water tight and good for up to say 70°C.

Devil of a job and I'd need to sell half a dozen to make it cost effective, depending on just how much they might sell for.

Brilliant info. Thank you. I'll see him on Friday I think, so will tell him then and get contact info if he thinks he can find some other Capri owners!

He was adamant that there is a need for something to replace damaged or worn ones, but as we're not in the UK, not sure how many owners he knows here!! But he probably has contacts over there :D

will message you if anything comes from Friday :D :D

x
Life is for living. Buy the shoes. Eat the cake. Ride the bikes. Just, ride the bikes!! :bblonde:
User avatar
Screwdriver
Posts: 2004
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 248 times
Been thanked: 705 times

Re: Bike logos, badges, etc.

Post by Screwdriver »

About time the front door got a lick of paint...

Image

So I tarted up the furniture and finally installed a 3D printed door number I've been itching to try out.

Image

It is fitted with a light sensitive solar powered backlight and packed full of leds so it should glow just enough (and not too much)...

I am entertaining the idea of knocking these out in the style of the periodic table so if you have a chemically interesting door number, drop me a line.
“No one is more hated than he who speaks the truth.”
Plato
v8-powered
Posts: 2499
Joined: Mon Mar 16, 2020 7:37 pm
Location: Layer-de-la-Haye
Has thanked: 2211 times
Been thanked: 1227 times

Re: Bike logos, badges, etc.

Post by v8-powered »

Screwdriver wrote: Thu Sep 28, 2023 1:05 pm
It is fitted with a light sensitive solar powered backlight and packed full of leds so it should glow just enough (and not too much)...
Great idea :thumbup:
Our house isn't easily seen from the road and street numbers make no sense, so I had to have a light-reflective house number made up and screwed to a tree at end of the drive but your idea would have been far better.
User avatar
Noggin
Posts: 7779
Joined: Thu Mar 19, 2020 1:46 pm
Location: Ski Resort
Has thanked: 15737 times
Been thanked: 3788 times

Re: Bike logos, badges, etc.

Post by Noggin »

v8-powered wrote: Thu Sep 28, 2023 1:34 pm
Screwdriver wrote: Thu Sep 28, 2023 1:05 pm
It is fitted with a light sensitive solar powered backlight and packed full of leds so it should glow just enough (and not too much)...
Great idea :thumbup:
Our house isn't easily seen from the road and street numbers make no sense, so I had to have a light-reflective house number made up and screwed to a tree at end of the drive but your idea would have been far better.
Seeing door numbers was my biggest nightmare as a first responder!! I'd deal with the patient situation fine, but trying to find a house number was the worst bit!!!
Life is for living. Buy the shoes. Eat the cake. Ride the bikes. Just, ride the bikes!! :bblonde: