Classic bikes... Do you have an urge ?

Anything you like about motorbikes
Le_Fromage_Grande
Posts: 11234
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 607 times
Been thanked: 4124 times

Re: Classic bikes... Do you have an urge ?

Post by Le_Fromage_Grande »

There wasn't a YDS6, mostly because there wasn't a YR4.
From memory, the YDS7 is where the crankcases go from splitting vertically, to splitting horizontally (like an RD250), I don't think a YDS5 has the clutch on the end of the crank like a YDS3.
Honda Owner
User avatar
mangocrazy
Posts: 6920
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2407 times
Been thanked: 3636 times

Re: Classic bikes... Do you have an urge ?

Post by mangocrazy »

A mate of mine had a YDS2 - all I can remember about that bike was that it spent a large part of its time back at the dealers. Eventually they found out what the root problem was with the engine, but by that time my mate had given up and bought another bike.

A Velocette Venom. No. I still can't figure it out either.

So were Yamaha a bit shy of even model numbered bikes at that time? Perhaps it was all down to the YDS2... I remember a YDS3, a YDS5 and a YDS7, but no 4, 6 or 8...
There is no cloud, just somebody else's computer.
Ian
Posts: 372
Joined: Tue Jul 18, 2023 9:25 am
Has thanked: 600 times
Been thanked: 319 times

Re: Classic bikes... Do you have an urge ?

Post by Ian »

The Spin Doctor wrote: Sat Jul 29, 2023 1:13 pm My girlfriend at college had a 175 Bantam, and the damn thing was forever breaking down whenever we went riding anywhere. I particularly remember spending a happy half hour in mid-winter p!ssing rain at midnight at the side of the road trying to hack her electrics back together so that at least the headlight worked and she could see roughly where she was going.
If looked after they weren't mechanically unreliable, after all there was very little to them but electrics were shocking (no pun intended) you couldn't see where you were going even when the headlights did work and the ignition timing was all wrong which made them a bastard to start ( I just used to bump start mine). They were built down to a low price I guess
The thing that stops me ever putting one back on the road is the brakes, modern bicycles have better brakes.
JackyJoll
Posts: 3737
Joined: Sun May 03, 2020 10:11 pm
Has thanked: 261 times
Been thanked: 1266 times

Re: Classic bikes... Do you have an urge ?

Post by JackyJoll »

Ian wrote: Sun Jul 30, 2023 9:34 am
The Spin Doctor wrote: Sat Jul 29, 2023 1:13 pm My girlfriend at college had a 175 Bantam, and the damn thing was forever breaking down whenever we went riding anywhere. I particularly remember spending a happy half hour in mid-winter p!ssing rain at midnight at the side of the road trying to hack her electrics back together so that at least the headlight worked and she could see roughly where she was going.
If looked after they weren't mechanically unreliable, after all there was very little to them but electrics were shocking (no pun intended) you couldn't see where you were going even when the headlights did work and the ignition timing was all wrong which made them a bastard to start ( I just used to bump start mine). They were built down to a low price I guess
The thing that stops me ever putting one back on the road is the brakes, modern bicycles have better brakes.

If I remember right, 50+ years later, the forks and wheel of a 250 BSA fitted the D7 or D10 Bantam without too much trouble.

“Why not swap the whole bike?” I hear you say! Back in the “Ogri” days you could easily find yourself with a shed full of all that sort of junk, to pick bits from.
Ian
Posts: 372
Joined: Tue Jul 18, 2023 9:25 am
Has thanked: 600 times
Been thanked: 319 times

Re: Classic bikes... Do you have an urge ?

Post by Ian »

In that spirit I fitted the TLS from, I think, a 175 Honda. It was a horrific bodge but it got through an MOT with a torque arm held by a pipe clamp and a box spanners as an axle spacer.

It threw me over the handlebars once when I forgot to tighten the pipe clamp on the torque arm so it was a considerable improvement albeit borderline dangerous.
User avatar
ZRX61
Posts: 5167
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 1509 times
Been thanked: 1415 times

Re: Classic bikes... Do you have an urge ?

Post by ZRX61 »

mangocrazy wrote: Sat Jul 29, 2023 10:29 pm A Velocette Venom. No. I still can't figure it out either.
I would.... an uncle had a '65. It was responsible for my first motorcycle injury. I was 5yo & touched the exhaust.... *sizzle*

For some reason I have a small tin with parts of the Viper I owned/sold 43 years ago sitting in my main toolbox.
User avatar
mangocrazy
Posts: 6920
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2407 times
Been thanked: 3636 times

Re: Classic bikes... Do you have an urge ?

Post by mangocrazy »

ZRX61 wrote: Sun Jul 30, 2023 5:28 pm
mangocrazy wrote: Sat Jul 29, 2023 10:29 pm A Velocette Venom. No. I still can't figure it out either.
I would.... an uncle had a '65. It was responsible for my first motorcycle injury. I was 5yo & touched the exhaust.... *sizzle*

For some reason I have a small tin with parts of the Viper I owned/sold 43 years ago sitting in my main toolbox.
Yebbut - going from a Japanese two-stroke twin to a big ole single cylinder Velo? There could scarcely be two more different motorcycles...
There is no cloud, just somebody else's computer.
JackyJoll
Posts: 3737
Joined: Sun May 03, 2020 10:11 pm
Has thanked: 261 times
Been thanked: 1266 times

Re: Classic bikes... Do you have an urge ?

Post by JackyJoll »

mangocrazy wrote: Sun Jul 30, 2023 8:44 pm
ZRX61 wrote: Sun Jul 30, 2023 5:28 pm
mangocrazy wrote: Sat Jul 29, 2023 10:29 pm A Velocette Venom. No. I still can't figure it out either.
I would.... an uncle had a '65. It was responsible for my first motorcycle injury. I was 5yo & touched the exhaust.... *sizzle*

For some reason I have a small tin with parts of the Viper I owned/sold 43 years ago sitting in my main toolbox.
Yebbut - going from a Japanese two-stroke twin to a big ole single cylinder Velo? There could scarcely be two more different motorcycles...
Lots of us like different motorcycles.
User avatar
mangocrazy
Posts: 6920
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2407 times
Been thanked: 3636 times

Re: Classic bikes... Do you have an urge ?

Post by mangocrazy »

Guess so - if it's got two wheels, an engine and a frame, it qualifies... :D
There is no cloud, just somebody else's computer.
User avatar
ZRX61
Posts: 5167
Joined: Tue Mar 17, 2020 4:05 pm
Location: Solar Blight Valley
Has thanked: 1509 times
Been thanked: 1415 times

Re: Classic bikes... Do you have an urge ?

Post by ZRX61 »

JackyJoll wrote: Sun Jul 30, 2023 9:17 pm Lots of us like different motorcycles.
This is true, I like Kawasaki fours, triples, twins, sixes, singles....

...oh.