M5 tap.... with tool/handle... where from ?

[weeksy]

I bought a cheap ebay tap set for about £6, which worked well enough, but is now worn and crap after 3-4 uses

So want to buy a decent set this time..

[MrLongbeard]

I'd be looking at Cromwell or RS components for decent kit.

[crust]

Ha, coincidence.

This week I bought an M5 set (3 x M5 taps - plug, second and taper) - Dormer < I've used them at work and they are good.

[weeksy]

Ha, coincidence.

This week I bought an M5 set (3 x M5 taps - plug, second and taper) - Dormer < I've used them at work and they are good.

with tool ?

[weeksy]

RS components for decent kit.

I already have their site open actually.

[Rockburner]

Tracy tools.

[crust]

https://www.ebay.co.uk/itm/183990935841 ... BM9PuS24li

[porter_jamie]

You need to make sure it's high speed steel not carbon. Put the link up before you press buy so we can look

[porter_jamie]

Dormer stuff is good. Don't buy shite as it will snap off and ruin your expensive what ever you were working on.

[Mr. Dazzle]

Tracy tools.

Lives with Harry Hammer and Quentin QC.

[Druid]

We use taps a lot at work, mostly for cleaning threads but also for cutting new threads. We buy them from Wurth, they must be pretty good because I haven't broken one for months

https://eshop.wurth.co.uk/is-bin/INTERS ... Name=SR007

[Rockburner]

Tracy tools.

Lives with Harry Hammer and Quentin QC.

https://www.tracytools.com/products/

[Mr. Dazzle]

Tracy tools.

Lives with Harry Hammer and Quentin QC.

https://www.tracytools.com/products/

yeahIknows

Just think the name is amusing every time I hear it.

[Demannu]

Ffs this place is going to the dogs!
Strensham, Micheal Wood are closest to you!
I'm here to help

[David]

Ffs this place is going to the dogs!
Strensham, Micheal Wood are closest to you!
I'm here to help

I think I see what you did there......