Tips, tricks, questions and answers to tech questions
Yorick
Posts: 16741 Joined: Sat Mar 14, 2020 8:20 pmLocation: ParadiseHas thanked: 10266 times Been thanked: 6887 times
Post by Yorick Tue Jan 17, 2023 4:16 pm
Bloody things jammed. Only had it 35 years
I can afford another one, but like tinkering sometimes.
Are there any serviceable parts?
All the lifting bits seem free. Just the pin that the handle pushes is seized.
Tips?
20230117_155324.jpg (1.12 MiB) Viewed 652 times
20230117_155335.jpg (1.19 MiB) Viewed 652 times
Le_Fromage_Grande
Posts: 11234 Joined: Mon Mar 16, 2020 6:40 pmLocation: The road of many manky motorcyclesHas thanked: 607 times Been thanked: 4124 times
Post by Le_Fromage_Grande Tue Jan 17, 2023 4:39 pm
Don't leave it outside to turn into a rusty pile of scrap, I've got the same trolley jack and it still works fine and looks a lot better than that.
Last edited by
Le_Fromage_Grande on Tue Jan 17, 2023 4:40 pm, edited 1 time in total.
Honda Owner
DefTrap
Posts: 4504 Joined: Tue Apr 14, 2020 8:23 amHas thanked: 2265 times Been thanked: 2193 times
Post by DefTrap Tue Jan 17, 2023 4:39 pm
Warm it up a bit with the blowlamp and then try again?
Skub
Posts: 12170 Joined: Mon Mar 16, 2020 5:32 pmLocation: Norn IronHas thanked: 9833 times Been thanked: 10147 times
Post by Skub Tue Jan 17, 2023 4:55 pm
Give it a diesel bath.
Felix
Posts: 3943 Joined: Sat Jul 17, 2021 12:34 amHas thanked: 484 times Been thanked: 1427 times
Post by Felix Tue Jan 17, 2023 5:26 pm
DefTrap wrote: ↑ Tue Jan 17, 2023 4:39 pm
Warm it up a bit with the blowlamp and then try again?
Is there not a rubber seal behind that lowering pin?
Ditchfinder
Posts: 1124 Joined: Thu Dec 24, 2020 8:55 amHas thanked: 621 times Been thanked: 692 times
Post by Ditchfinder Tue Jan 17, 2023 5:30 pm
I can't see any signs whatsoever of that pin being persuaded with a Birmingham screwdriver
'07 Griso 1100 (for sale), '94 Sprint 900, the scabbiest Himalayan in the country
Yorick
Posts: 16741 Joined: Sat Mar 14, 2020 8:20 pmLocation: ParadiseHas thanked: 10266 times Been thanked: 6887 times
Post by Yorick Tue Jan 17, 2023 5:47 pm
Ditchfinder wrote: ↑ Tue Jan 17, 2023 5:30 pm
I can't see any signs whatsoever of that pin being persuaded with a Birmingham screwdriver
It might need the big one but still, give it a tap
We always called it a Manchester Screwdriver
Yorick
Posts: 16741 Joined: Sat Mar 14, 2020 8:20 pmLocation: ParadiseHas thanked: 10266 times Been thanked: 6887 times
Post by Yorick Tue Jan 17, 2023 5:54 pm
Got the special big one out. Yup. That moved the bugger
But it won't come back up
Undid the big nut and thread thing. Oil everywhere. Even with it in the vice, it's buggered.
Time for a new one. Always nice to buy new tools.
Taipan
Posts: 13949 Joined: Sat Mar 14, 2020 1:48 pmLocation: Essex Riviera!Has thanked: 15960 times Been thanked: 10248 times
Post by Taipan Tue Jan 17, 2023 6:52 pm
Does it pump with pressure? Has it got oil in it?
Yorick
Posts: 16741 Joined: Sat Mar 14, 2020 8:20 pmLocation: ParadiseHas thanked: 10266 times Been thanked: 6887 times
Post by Yorick Tue Jan 17, 2023 6:58 pm
Taipan wrote: ↑ Tue Jan 17, 2023 6:52 pm
Does it pump with pressure? Has it got oil in it?
It's seized solid and not much oil in it now
Taipan
Posts: 13949 Joined: Sat Mar 14, 2020 1:48 pmLocation: Essex Riviera!Has thanked: 15960 times Been thanked: 10248 times
Post by Taipan Tue Jan 17, 2023 7:01 pm
Post it to screwd for an overhaul!
mangocrazy
Posts: 6912 Joined: Tue Dec 22, 2020 9:58 pmHas thanked: 2407 times Been thanked: 3635 times
Post by mangocrazy Tue Jan 17, 2023 8:00 pm
That's fucked, mate. I realise that this is tantamount to treason for a Yorkie, but you're gonna have to splash some cash for a new 'un...
There is no cloud, just somebody else's computer.
mel
Posts: 62 Joined: Fri Mar 20, 2020 10:00 pmHas thanked: 13 times Been thanked: 36 times
Post by mel Wed Jan 18, 2023 11:35 pm
Look up ac 50
Yorick
Posts: 16741 Joined: Sat Mar 14, 2020 8:20 pmLocation: ParadiseHas thanked: 10266 times Been thanked: 6887 times
Post by Yorick Fri Feb 10, 2023 7:19 pm
Finally got me arse in gear and went to buy a new one.
Oh decisions. Trolley jack or bottle jack.
Bottle is lighter, smaller and cheaper. Are they any good ?
20230208_151905.jpg (1.89 MiB) Viewed 453 times
David
Posts: 2134 Joined: Tue Mar 17, 2020 8:50 amLocation: Top 'o the WorleHas thanked: 218 times Been thanked: 689 times
Post by David Fri Feb 10, 2023 7:21 pm
Yorick, I have one you can have for £20 plus postage......
ChrisW
Posts: 2721 Joined: Thu Feb 10, 2022 8:46 pmHas thanked: 2913 times Been thanked: 2053 times
Post by ChrisW Fri Feb 10, 2023 7:24 pm
Bottlejacks are fine, plus they can come in handy for jobs other than just lifting vehicles.
cheb
Posts: 4908 Joined: Tue Mar 17, 2020 6:51 amBeen thanked: 2618 times
Post by cheb Fri Feb 10, 2023 7:33 pm
Have you the clearance under your vehicle if it has a flat tyre for a bottle jack?
Yorick
Posts: 16741 Joined: Sat Mar 14, 2020 8:20 pmLocation: ParadiseHas thanked: 10266 times Been thanked: 6887 times
Post by Yorick Fri Feb 10, 2023 7:35 pm
cheb wrote: ↑ Fri Feb 10, 2023 7:33 pm
Have you the clearance under your vehicle if it has a flat tyre for a bottle jack?
Thanks, I forgot to check, but the Mighty Duster does have mega ground clearance
David
Posts: 2134 Joined: Tue Mar 17, 2020 8:50 amLocation: Top 'o the WorleHas thanked: 218 times Been thanked: 689 times
Post by David Fri Feb 10, 2023 7:45 pm
Yozzer, you need my little red trolley jack...£15 + postage?
DefTrap
Posts: 4504 Joined: Tue Apr 14, 2020 8:23 amHas thanked: 2265 times Been thanked: 2193 times
Post by DefTrap Fri Feb 10, 2023 8:17 pm
If I had the choice I'd have a trolley jack.
