Binstore

What non motorbike related things are you doing, making, building, planning or designing
User avatar
Screwdriver
Posts: 2162
Joined: Sun Aug 09, 2020 12:15 pm
Location: Wherever I lay my hat, that's my hat...
Has thanked: 256 times
Been thanked: 740 times

Re: Binstore

Post by Screwdriver »

Yambo wrote: ↑Tue Sep 27, 2022 1:23 pm
Ant wrote: ↑Tue Sep 27, 2022 12:37 pm
The number one problem I have these days is everything takes me ages, I can't cut in a straight line.

Work on boats. A lot of the time you don't have to. :P
Carpentry: nearest half inch

Joinery: nearest 1/8th"

Cabinetry: nearest 1/32"

Boatbuilding: nearest boat...
Top
Felix
Posts: 3952
Joined: Sat Jul 17, 2021 12:34 am
Has thanked: 485 times
Been thanked: 1429 times

Re: Binstore

Post by Felix »

I could not saw in a straight line also. Most of my problem was sawing up and down the drawn line. Once i switched to a flatter angle i never have an issue with wiggles now.
Top
User avatar
Yambo
Posts: 2470
Joined: Mon Mar 16, 2020 8:08 pm
Location: Self Isolating
Has thanked: 598 times
Been thanked: 1647 times

Re: Binstore

Post by Yambo »

Felix wrote: ↑Tue Sep 27, 2022 6:12 pm I could not saw in a straight line also. Most of my problem was sawing up and down the drawn line. Once i switched to a flatter angle i never have an issue with wiggles now.

A flatter angle is much better for long straight cuts. The other trick with any cutting is to let the saw do the work. You have to move it backwards and forwards of course but you don't have to put in huge amounts of effort. That just makes the blade flex a bit and suddenly you're off line.
Top
Ant
Posts: 1905
Joined: Mon Mar 16, 2020 8:57 pm
Has thanked: 39 times
Been thanked: 227 times

Re: Binstore

Post by Ant »

Screwdriver wrote: ↑Tue Sep 27, 2022 4:54 pm
Yambo wrote: ↑Tue Sep 27, 2022 1:23 pm
Ant wrote: ↑Tue Sep 27, 2022 12:37 pm
The number one problem I have these days is everything takes me ages, I can't cut in a straight line.

Work on boats. A lot of the time you don't have to. :P
Carpentry: nearest half inch

Joinery: nearest 1/8th"

Cabinetry: nearest 1/32"

Boatbuilding: nearest boat...
That reminds me of a conversation we were having with the guys at work, about builders squares.
Top

Return to “Shed / DIY / workshop”