got to go and have a look - one is on the Bfe - it might be an SM1
the other has bent rails - but nor sure.
Certainly better that Charge / Fabric
What have you done to your bicycle today ?
-
Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: What have you done to your bicycle today ?
the other has bent rails - but nor sure.
Certainly better that Charge / Fabric
-
MingtheMerciless
- Posts: 3553
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2942 times
- Been thanked: 1883 times
Re: What have you done to your bicycle today ?
Holy thread resurrection Batman
So the shifting on the Curtis has been off for a few months, nothing to dramatic, just not right, I fiddled with the AXS micro shift adjustment to no avail but last week the shifting went properly erratic, skipping gears so you'd have to double shift and then one gear back etc. Couldn't see anything obvs so today (having kicked the corner of the bed this morning and having a black little toe nail so no riding) stripped off the mech, chain and cassette. After a monster clean the cassette came up spotless after about 200g of PTFE lube gunk came out the back of the cassette along with assorted twigs and grass stalks. Chain cleaned and still passing chain check. Rear mech cleaned of more summer lube gunk.
I reassembled the whole thing and the shifting was still pants so a quick google suggested b tension was out. Now its pretty much set and forget on AXS so I dug the B tension alignment gauge and checked it, it was nearly 10mm out!!! It was a good few turns to get it in gauge, I've no idea how it had unscrewed itself as the screw has blue goo on the thread. Something to watch in future. Shifting was back to its flawless self once I'd finished.
So the shifting on the Curtis has been off for a few months, nothing to dramatic, just not right, I fiddled with the AXS micro shift adjustment to no avail but last week the shifting went properly erratic, skipping gears so you'd have to double shift and then one gear back etc. Couldn't see anything obvs so today (having kicked the corner of the bed this morning and having a black little toe nail so no riding) stripped off the mech, chain and cassette. After a monster clean the cassette came up spotless after about 200g of PTFE lube gunk came out the back of the cassette along with assorted twigs and grass stalks. Chain cleaned and still passing chain check. Rear mech cleaned of more summer lube gunk.
I reassembled the whole thing and the shifting was still pants so a quick google suggested b tension was out. Now its pretty much set and forget on AXS so I dug the B tension alignment gauge and checked it, it was nearly 10mm out!!! It was a good few turns to get it in gauge, I've no idea how it had unscrewed itself as the screw has blue goo on the thread. Something to watch in future. Shifting was back to its flawless self once I'd finished.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
weeksy
- Site Admin
- Posts: 23421
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5451 times
- Been thanked: 13087 times
Re: What have you done to your bicycle today ?
Fitted a new 46T chainring onto the donkey turbo trainer bike today. Needed some more gears than the 42T as I was spinning out on the new Zwift Hub turbo at 350w.
Some nice new bolts as well and happy days.
Some nice new bolts as well and happy days.
Re: What have you done to your bicycle today ?
Giant road bike (zwift mule) has been getting a bit noisy so it got some love today, but not enough, wasn't just the rear mech and chain needing a good clean and lube. So stuck a new rear mech on, deep cleaned the chain and set up the gears. Then onto the net and a new front ring, cassette and bottom bracket are on the way.
So on to the Fish, was intending to stick the rear mech from the Giant on to it, new cassette and chain. Before I could get stuck into that I noticed how crunchy the rear wheel was, so stripped down the rear hub and have ordered new bearings.
Hopefully will have all bikes up and running sweet for when the nice weathers here.
So on to the Fish, was intending to stick the rear mech from the Giant on to it, new cassette and chain. Before I could get stuck into that I noticed how crunchy the rear wheel was, so stripped down the rear hub and have ordered new bearings.
Hopefully will have all bikes up and running sweet for when the nice weathers here.
-
MingtheMerciless
- Posts: 3553
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2942 times
- Been thanked: 1883 times
Re: What have you done to your bicycle today ?
Lovely weather so outside Curtis BB service today, nice and straight forward, note to self muc-off degreaser spray has a homing ability for unshielded eyes.....OUCH!
Rear wheel was a bit noisy so took it off, its an Onyx Vespa hub so not built like a normal hub, Freehub came off, dodgy bearings in one end, the outer shaft bearing was also a proper squaring. Inner shaft came out OK and the NDS bearing was kaput, bearing on the Freehub side was OK and then the outer sprag assembly self destructed and tiny sprags and tiny little black rods fell on the patio. Massive magnet came out of shed and retrieved (some of) them. Phoned shop, much hilarity and ridicule, took wheel to shop with container for the escapees. LBS owner looked at bits ummed and ahhed and it looks like the outer sprag assembly has died. More ridicule , followed by we can fix it leave it with us.
Came home, have spare wheel with Curtis spacing so swapped cassette over, realigned brake, much tyre jizz and good to go for tomorrow.
I decided to ignore the headset as I was getting hot and bothered baking in the sun.
Rear wheel was a bit noisy so took it off, its an Onyx Vespa hub so not built like a normal hub, Freehub came off, dodgy bearings in one end, the outer shaft bearing was also a proper squaring. Inner shaft came out OK and the NDS bearing was kaput, bearing on the Freehub side was OK and then the outer sprag assembly self destructed and tiny sprags and tiny little black rods fell on the patio. Massive magnet came out of shed and retrieved (some of) them. Phoned shop, much hilarity and ridicule, took wheel to shop with container for the escapees. LBS owner looked at bits ummed and ahhed and it looks like the outer sprag assembly has died. More ridicule , followed by we can fix it leave it with us.
Came home, have spare wheel with Curtis spacing so swapped cassette over, realigned brake, much tyre jizz and good to go for tomorrow.
I decided to ignore the headset as I was getting hot and bothered baking in the sun.
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: What have you done to your bicycle today ?
Bled some Avid brakes for the first time. Lovely brake fluid shower !!
And yes, I was using the correct kit - but what a pain the arse they are.
Bleed port on the inside of the brake, so brake off, have to take the pads out, put in a piston retention block etc ....
All of this because the brake was rubbing intermittently - general on uphills! Found out on side of the 4 piston set up wasn't really moving. Managed to ge one of them going, lubed it, and the tried to free up the last one. Which was a complete bastard.
Eventually started moving - and then one of the other pistons escaped its zip tie and pissed brake fluid every where ...
And yes, I was using the correct kit - but what a pain the arse they are.
Bleed port on the inside of the brake, so brake off, have to take the pads out, put in a piston retention block etc ....
All of this because the brake was rubbing intermittently - general on uphills! Found out on side of the 4 piston set up wasn't really moving. Managed to ge one of them going, lubed it, and the tried to free up the last one. Which was a complete bastard.
Eventually started moving - and then one of the other pistons escaped its zip tie and pissed brake fluid every where ...
-
MingtheMerciless
- Posts: 3553
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2942 times
- Been thanked: 1883 times
Re: What have you done to your bicycle today ?
Glad it wasn't just me today, I nearly had a full on Tasmanian Devil Mantrum when the sprags fell on the floorMr Moofo wrote: ↑Fri Jun 09, 2023 5:44 pm Bled some Avid brakes for the first time. Lovely brake fluid shower !!
And yes, I was using the correct kit - but what a pain the arse they are.
Bleed port on the inside of the brake, so brake off, have to take the pads out, put in a piston retention block etc ....
All of this because the brake was rubbing intermittently - general on uphills! Found out on side of the 4 piston set up wasn't really moving. Managed to ge one of them going, lubed it, and the tried to free up the last one. Which was a complete bastard.
Eventually started moving - and then one of the other pistons escaped its zip tie and pissed brake fluid every where ...
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: What have you done to your bicycle today ?
Mine wasn't helped by a lifeboat launch in the middle of it - and my wife have a pettit tatty over having to drive my car to pick up the dog ( don't ask!)MingtheMerciless wrote: ↑Fri Jun 09, 2023 6:00 pmGlad it wasn't just me today, I nearly had a full on Tasmanian Devil Mantrum when the sprags fell on the floorMr Moofo wrote: ↑Fri Jun 09, 2023 5:44 pm Bled some Avid brakes for the first time. Lovely brake fluid shower !!
And yes, I was using the correct kit - but what a pain the arse they are.
Bleed port on the inside of the brake, so brake off, have to take the pads out, put in a piston retention block etc ....
All of this because the brake was rubbing intermittently - general on uphills! Found out on side of the 4 piston set up wasn't really moving. Managed to ge one of them going, lubed it, and the tried to free up the last one. Which was a complete bastard.
Eventually started moving - and then one of the other pistons escaped its zip tie and pissed brake fluid every where ...
-
weeksy
- Site Admin
- Posts: 23421
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5451 times
- Been thanked: 13087 times
-
Couchy
- Posts: 2388
- Joined: Sat Mar 14, 2020 2:56 pm
- Has thanked: 326 times
- Been thanked: 2173 times
Re: What have you done to your bicycle today ?
Rode it, really enjoy the lower powered and lighter e-bike
-
MingtheMerciless
- Posts: 3553
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2942 times
- Been thanked: 1883 times
Re: What have you done to your bicycle today ?
Fitted a new Maxxis DHR2 with EXO+ to Mrs M's Levo, this was after the Dissector (horrible tyre) finally gave up the ghost with at least 3 anchovies in it, with one hole occasionally ejecting its bungs and an out of round wobble setting in.
I also tweaked the gears after a new gear cable stretched a bit.
The Evil needs a new rear tyre as that's out of round after the Peaks but I'm waiting for a new rear wheel to be built (as I suspect it'll be 6 months or so before i9 or Evil EU importer cough for a new wheel under warranty due to the spoke snapping issue it has).
I also tweaked the gears after a new gear cable stretched a bit.
The Evil needs a new rear tyre as that's out of round after the Peaks but I'm waiting for a new rear wheel to be built (as I suspect it'll be 6 months or so before i9 or Evil EU importer cough for a new wheel under warranty due to the spoke snapping issue it has).
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
Ditchfinder
- Posts: 1123
- Joined: Thu Dec 24, 2020 8:55 am
- Has thanked: 621 times
- Been thanked: 692 times
Re: What have you done to your bicycle today ?
The Deore brakes on the e-bike got new pads and a bleed. Properly got my moneys worth out of the last set of pads, I reckon 1 gentle wipe with a slightly rough rag and I would have been down to metal. 
Now the brakes aren't rubbing so much I can hear that the freehub isn't sounding too good though so that's coming off for a clean later
Now the brakes aren't rubbing so much I can hear that the freehub isn't sounding too good though so that's coming off for a clean later
'07 Griso 1100 (for sale), '94 Sprint 900, the scabbiest Himalayan in the country
-
weeksy
- Site Admin
- Posts: 23421
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5451 times
- Been thanked: 13087 times
Re: What have you done to your bicycle today ?
Well that’s me done. Pivot bearings swapped on Slayer, bottom bracket done on that too.
New tyres installed on the spare Privateer wheels. Headset/tool tightened
New tyres installed on the spare Privateer wheels. Headset/tool tightened
-
Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: What have you done to your bicycle today ?
I have covered mine in Alps mud. FFS , it could have rained next week …
15 gbp for some Peaty’s wet weather lube
15 gbp for some Peaty’s wet weather lube
-
Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
-
weeksy
- Site Admin
- Posts: 23421
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5451 times
- Been thanked: 13087 times
-
Mr Moofo
- Posts: 4620
- Joined: Sat Mar 14, 2020 1:41 pm
- Location: Brightonish
- Has thanked: 1829 times
- Been thanked: 1469 times
Re: What have you done to your bicycle today ?
Later - just dealing with a wrist injury - broken or maybe just ligaments
Sitting is restaurant with a bag of frozen carrots on it!
Sitting is restaurant with a bag of frozen carrots on it!
-
MingtheMerciless
- Posts: 3553
- Joined: Wed Mar 18, 2020 7:42 am
- Location: Scarfolk on Sea
- Has thanked: 2942 times
- Been thanked: 1883 times
Re: What have you done to your bicycle today ?
Scaphoid? as per your strava? How did it happen?
"Of all the stories you told me, which ones were true and which ones weren't?"
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
"My dear Doctor, they're all true."
"Even the lies?"
"Especially the lies."
-
weeksy
- Site Admin
- Posts: 23421
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5451 times
- Been thanked: 13087 times
-
Count Steer
- Posts: 11809
- Joined: Mon Jul 19, 2021 4:59 pm
- Has thanked: 6376 times
- Been thanked: 4753 times
Re: What have you done to your bicycle today ?
I expect he'll say (see other thread) 'Really, I'm old enough to know better'.
Doubt is not a pleasant condition.
But certainty is an absurd one.
Voltaire
But certainty is an absurd one.
Voltaire