NBT: The old keeper is going, meet the new one!

Discussions and updates on your new bike, your new build, your wishes, wants and desires
User avatar
Skub
Posts: 12171
Joined: Mon Mar 16, 2020 5:32 pm
Location: Norn Iron
Has thanked: 9834 times
Been thanked: 10147 times

Re: NBT: The old keeper is going, meet the new one!

Post by Skub »

Ha! I saw the pic on the challenge thread and it confused me no end. :?

All is now revealed.

Your very good health to use for the next 6 weeks TeePee. :thumbup:
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
User avatar
Taipan
Posts: 13951
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15964 times
Been thanked: 10249 times

Re: NBT: The old keeper is going, meet the new one!

Post by Taipan »

Yorick wrote: Tue Jul 05, 2022 8:27 pm
MrLongbeard wrote: Tue Jul 05, 2022 8:26 pm Tidy.
Be tidier with some proper half yellow wheels mind
He's on Ebay buying furry dice and bar end tassles :)
Exhaust actually! Thought i'd get a 2md hand Akra. Think again! £660 is the cheapest so far! :shock:
Le_Fromage_Grande
Posts: 11234
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 607 times
Been thanked: 4124 times

Re: NBT: The old keeper is going, meet the new one!

Post by Le_Fromage_Grande »

Taipan wrote: Tue Jul 05, 2022 8:11 pm
Le_Fromage_Grande wrote: Tue Jul 05, 2022 7:51 pm The MT will be sold before September, but it is a nice looking bike, the rack improves it's looks
Pah! It'll be here until at least mid October! Its a keeper! :lol:

You should see it with the top box on. If I was parked at the coast and it was rough weather, I could see a lifeboat coming out of it! :D
Supermofo would love it

It's looks remind me of the original 750 Fazer
Honda Owner
User avatar
Taipan
Posts: 13951
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15964 times
Been thanked: 10249 times

Re: NBT: The old keeper is going, meet the new one!

Post by Taipan »

Le_Fromage_Grande wrote: Tue Jul 05, 2022 8:55 pm
Taipan wrote: Tue Jul 05, 2022 8:11 pm
Le_Fromage_Grande wrote: Tue Jul 05, 2022 7:51 pm The MT will be sold before September, but it is a nice looking bike, the rack improves it's looks
Pah! It'll be here until at least mid October! Its a keeper! :lol:

You should see it with the top box on. If I was parked at the coast and it was rough weather, I could see a lifeboat coming out of it! :D
Supermofo would love it

It's looks remind me of the original 750 Fazer
:wtf:

Image
Le_Fromage_Grande
Posts: 11234
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 607 times
Been thanked: 4124 times

Re: NBT: The old keeper is going, meet the new one!

Post by Le_Fromage_Grande »

Why has it got a twenty foot container on the rack?
YAMAHA-FZX-750-Fazer-1069_1.jpg
YAMAHA-FZX-750-Fazer-1069_1.jpg (52.77 KiB) Viewed 486 times
The MT is sort of like a shorter taller Fazer
Honda Owner
User avatar
Skub
Posts: 12171
Joined: Mon Mar 16, 2020 5:32 pm
Location: Norn Iron
Has thanked: 9834 times
Been thanked: 10147 times

Re: NBT: The old keeper is going, meet the new one!

Post by Skub »

Taipan wrote: Tue Jul 05, 2022 9:05 pm Image
Plonk
"Be kind to past versions of yourself that didn't know what you know now."
Walt Whitman
https://soundcloud.com/skub1955
User avatar
mangocrazy
Posts: 6920
Joined: Tue Dec 22, 2020 9:58 pm
Has thanked: 2407 times
Been thanked: 3635 times

Re: NBT: The old keeper is going, meet the new one!

Post by mangocrazy »

Nice! But I'd be getting shot of those fluoro MT-09 stickers toot sweet...
There is no cloud, just somebody else's computer.
User avatar
dern
Posts: 2141
Joined: Wed Aug 18, 2021 8:51 am
Has thanked: 1016 times
Been thanked: 1776 times

Re: NBT: The old keeper is going, meet the new one!

Post by dern »

Nice bike. I like the stickers.
Asian Boss
Posts: 1801
Joined: Thu Apr 02, 2020 8:52 pm
Has thanked: 498 times
Been thanked: 650 times

Re: NBT: The old keeper is going, meet the new one!

Post by Asian Boss »

Top bombing sky marshal.

I'm sorry the Xadv didn't work out but I kind of sensed that from the beginning. If I had more room to get it past my car I'd make you an offer for it. But I don't.
To a kid looking up to me, life ain't nothing but bitches and money.
User avatar
Bigyin
Posts: 3179
Joined: Sun Mar 15, 2020 7:39 pm
Has thanked: 1412 times
Been thanked: 2680 times

Re: NBT: The old keeper is going, meet the new one!

Post by Bigyin »

dern wrote: Tue Jul 05, 2022 10:42 pm Nice bike. I like the stickers.
weirdo :mrgreen:


Nice bike but the stickers are horrible ....enjoy the new keeper while it lasts ;)
User avatar
Tricky
Posts: 1819
Joined: Sat Mar 14, 2020 9:46 pm
Location: Chilterns
Has thanked: 2568 times
Been thanked: 2680 times

Re: NBT: The old keeper is going, meet the new one!

Post by Tricky »

That's properly awesome matey and super 8-) 8-)

Loving the rim tape- very you! :D
User avatar
Dodgy69
Posts: 5457
Joined: Mon Mar 16, 2020 6:36 pm
Location: Shrewsbury
Has thanked: 1749 times
Been thanked: 2085 times

Re: NBT: The old keeper is going, meet the new one!

Post by Dodgy69 »

Great bikes. Rid it of the yellow and get the RTTL graphics kit. 👍
Yamaha rocket 3
User avatar
Taipan
Posts: 13951
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15964 times
Been thanked: 10249 times

Re: NBT: The old keeper is going, meet the new one!

Post by Taipan »

Just walked out and looked at the bike and the yellowness must go. I'm returning to my Henry Ford colour scheme roots! :thumbup:

What's the best way to remove them other than a screwdriver? :shock: :?
User avatar
weeksy
Site Admin
Posts: 23427
Joined: Sat Mar 14, 2020 12:08 pm
Has thanked: 5452 times
Been thanked: 13097 times

Re: NBT: The old keeper is going, meet the new one!

Post by weeksy »

Taipan wrote: Wed Jul 06, 2022 8:38 am Just walked out and looked at the bike and the yellowness must go. I'm returning to my Henry Ford colour scheme roots! :thumbup:

What's the best way to remove them other than a screwdriver? :shock: :?
assuming not under lacquer, i'd be on hair drier duty.
User avatar
the_priest
Posts: 1908
Joined: Sun Mar 15, 2020 2:18 pm
Location: Dwelling in Welling
Has thanked: 1874 times
Been thanked: 2171 times

Re: NBT: The old keeper is going, meet the new one!

Post by the_priest »

Your very good health to enjoy that rather tasty (ex yellow bits) bike! Seriously, give us a go!!
Proverbs 17:9
One who forgives an affront fosters friendship, but one who dwells on disputes will alienate a friend.
Mr. Dazzle
Posts: 13954
Joined: Mon Mar 16, 2020 7:57 pm
Location: Milton Keynes
Has thanked: 2552 times
Been thanked: 6257 times

Re: NBT: The old keeper is going, meet the new one!

Post by Mr. Dazzle »

Taipan wrote: Wed Jul 06, 2022 8:38 am What's the best way to remove them
Fire would certainly destroy all evidence.
User avatar
Count Steer
Posts: 11828
Joined: Mon Jul 19, 2021 4:59 pm
Has thanked: 6381 times
Been thanked: 4761 times

Re: NBT: The old keeper is going, meet the new one!

Post by Count Steer »

If the logo on the swingarm is separate from the lettering I'd start with that one and see if it leaves any visible evidence. Doubt they're under lacquer as the one on the screen won't be.

Another use for WD40?
Doubt is not a pleasant condition.
But certainty is an absurd one
.
Voltaire
User avatar
Taipan
Posts: 13951
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15964 times
Been thanked: 10249 times

Re: NBT: The old keeper is going, meet the new one!

Post by Taipan »

Just carried out its first commuting duty. This is where any problems will show up as this is what its job is, a bit like you guys getting a bike but not really unleashing it fully to you get on the track, Wull exlcuded obvs! :D

The first thing I noticed was the seat isn't comfortable and I was getting a bit of a numb bum. This may be a case of just getting used to it, or of course there is the Yamaha comfort seat or many aftermarket options. I'll give it a week or two to see how things work out.

These bikes are known for a twitchy throttle, but I think its just uber responsive! I nearly hit a van up the arse as I went to shoot forward into a gap! :oops: :D B mode calms things down but its also bloody horrible as there is a real delay in the revs coming off idle. I guess that will be reserved for use in the rain and I'm sure I'll get used to the throttle response soon.

The engine is sublime. Really tractable and surprisingly smooth. I've not owned many bikes that don't give me numb fingers in the throttle hand but no sign of that with this bike, or at least not so far? Sitting in 50mph average speed check area in 6th and the mearest whiff of throttle and it just pulls cleanly, no bogging down at all. I had a couple of sections of open road as I pulled away from the lights, so gave it some! Wow that horizon starts coming at you fast! :shock: :D It also made me think HTF do you guys cane a lot more powerful bikes. I just don't think my brain can process that kind of information! :oops:

I have read these bikes have soft suspenion and being on the heavier side of fat, I was expecting it to be bouncing about, but not so? I saw it's adjustable on the top of the forks and they look to be at different settings? I'll read the manual later and put everything to standard I think?

Early days yet but seems a very useable bike and it feels like chucking a moped around after the X-ADV and that engine!! :wub: I really need an exhaust on it though. One with a db killer, but a bit louder than the OEM one. I'm reminded of when weeksy had the XSR though and how hard it is to put an after-market exhaust on there that doesn't look a bit gash? Maybe I'll suffer the looks though as I cant see it when I'm riding it, but I can hear it! 8-)
Le_Fromage_Grande
Posts: 11234
Joined: Mon Mar 16, 2020 6:40 pm
Location: The road of many manky motorcycles
Has thanked: 607 times
Been thanked: 4124 times

Re: NBT: The old keeper is going, meet the new one!

Post by Le_Fromage_Grande »

On my GSXS the pause between opening the throttle and the bike responding at very low rpm is caused by the traction control, turning it off gets rid of the slight pause.
Honda Owner
User avatar
Taipan
Posts: 13951
Joined: Sat Mar 14, 2020 1:48 pm
Location: Essex Riviera!
Has thanked: 15964 times
Been thanked: 10249 times

Re: NBT: The old keeper is going, meet the new one!

Post by Taipan »

Le_Fromage_Grande wrote: Wed Jul 06, 2022 10:39 am On my GSXS the pause between opening the throttle and the bike responding at very low rpm is caused by the traction control, turning it off gets rid of the slight pause.
It's only in B mode I notice it, but I think that is the point of B mode, to give a slower throttle response? But it almost feels like it's not going to respond, at least or that split second or compared to the other modes. Can't see me ever turning TC off! :oops: :D