Theraputic isn't it and actually enjoyable seeing results.
Cleaning exhaust headers
- weeksy
- Site Admin
- Posts: 23443
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5456 times
- Been thanked: 13103 times
- Trinity765
- Posts: 2321
- Joined: Fri Nov 06, 2020 2:27 pm
- Location: Brighton
- Has thanked: 2442 times
- Been thanked: 2398 times
Re: Cleaning exhaust headers
Yes, but you see that silver bit at the top, that's where I scrubbed it with a brush - I thought a tiny bit of spray paint might get rid of it.
- weeksy
- Site Admin
- Posts: 23443
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5456 times
- Been thanked: 13103 times
-
- Posts: 11236
- Joined: Mon Mar 16, 2020 6:40 pm
- Location: The road of many manky motorcycles
- Has thanked: 607 times
- Been thanked: 4125 times
Re: Cleaning exhaust headers
Halfords engine paint would do it, it's brush on but doesn't seem to get brush marks.
- Trinity765
- Posts: 2321
- Joined: Fri Nov 06, 2020 2:27 pm
- Location: Brighton
- Has thanked: 2442 times
- Been thanked: 2398 times
Re: Cleaning exhaust headers
I'm uploading pictures of brushes to Flikr now - I never saw this day coming I don't know where the hairs came from
- weeksy
- Site Admin
- Posts: 23443
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5456 times
- Been thanked: 13103 times
Re: Cleaning exhaust headers
Not too bad, I'd usually have gone a bit softer, but I wouldn't have expected that to take paint off
-
- Posts: 11236
- Joined: Mon Mar 16, 2020 6:40 pm
- Location: The road of many manky motorcycles
- Has thanked: 607 times
- Been thanked: 4125 times
- Trinity765
- Posts: 2321
- Joined: Fri Nov 06, 2020 2:27 pm
- Location: Brighton
- Has thanked: 2442 times
- Been thanked: 2398 times
- weeksy
- Site Admin
- Posts: 23443
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5456 times
- Been thanked: 13103 times
Re: Cleaning exhaust headers
If I never wanted a triumph before this thread, you can be sure I don't want one now.
Although in its defence I don't think it's had the best chance
- Trinity765
- Posts: 2321
- Joined: Fri Nov 06, 2020 2:27 pm
- Location: Brighton
- Has thanked: 2442 times
- Been thanked: 2398 times
Re: Cleaning exhaust headers
I have to agree. It wasn't really designed for what I've done to it (touring the UK in all weathers/seasons), I should have got a Himalayan. When it works and the roads are dry it's a cracking bikeweeksy wrote: ↑Mon Feb 14, 2022 4:48 pmIf I never wanted a triumph before this thread, you can be sure I don't want one now.
Although in its defence I don't think it's had the best chance
- Taipan
- Posts: 13980
- Joined: Sat Mar 14, 2020 1:48 pm
- Location: Essex Riviera!
- Has thanked: 15996 times
- Been thanked: 10262 times
Re: Cleaning exhaust headers
There was I just about to say if the rest of its alright, a sharpie is your best bet. BTW, Plasticote is very thick and you don't want to block what you've just cleaned!Trinity765 wrote: ↑Mon Feb 14, 2022 1:43 pm In fact, a Sharpie pen would probably have worked well enough - didn't think of that.
- Trinity765
- Posts: 2321
- Joined: Fri Nov 06, 2020 2:27 pm
- Location: Brighton
- Has thanked: 2442 times
- Been thanked: 2398 times
Re: Cleaning exhaust headers
I also purchased masking tapeTaipan wrote: ↑Tue Feb 15, 2022 7:33 amThere was I just about to say if the rest of its alright, a sharpie is your best bet. BTW, Plasticote is very thick and you don't want to block what you've just cleaned!Trinity765 wrote: ↑Mon Feb 14, 2022 1:43 pm In fact, a Sharpie pen would probably have worked well enough - didn't think of that.
- weeksy
- Site Admin
- Posts: 23443
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5456 times
- Been thanked: 13103 times
Re: Cleaning exhaust headers
Yeah instead of that i'd be just spraying the paint into the lid and using a kids paintbrush set, you can get them for about £2 in Tesco/wherever.
I usually have a touch up paint in satin, matt, gloss in the garage which makes things easier, just generic car paint things or indeed bike paint, but a simple little brush set would be just as effective.
I usually have a touch up paint in satin, matt, gloss in the garage which makes things easier, just generic car paint things or indeed bike paint, but a simple little brush set would be just as effective.
- Taipan
- Posts: 13980
- Joined: Sat Mar 14, 2020 1:48 pm
- Location: Essex Riviera!
- Has thanked: 15996 times
- Been thanked: 10262 times
Re: Cleaning exhaust headers
TBH I'd have let it soak in a suitable receptacle overnight, then took a jet wash to the back of it. It's rare that won't clean it out, or at least 95% of it, give or take. Bent fins can be rolled out with a toothpick. Stick it on a rad indoors until its good and warm/hot then apply a few dust coats of satin black. Job jobbed.
- weeksy
- Site Admin
- Posts: 23443
- Joined: Sat Mar 14, 2020 12:08 pm
- Has thanked: 5456 times
- Been thanked: 13103 times
-
- Posts: 11236
- Joined: Mon Mar 16, 2020 6:40 pm
- Location: The road of many manky motorcycles
- Has thanked: 607 times
- Been thanked: 4125 times
Re: Cleaning exhaust headers
If a dirty radiator bothered me enough to spend that amount of time cleaning it I'd buy a brand new Chinese copy off eBay and fit that, the one I had for my CB400SF was better made than the one Honda fitted.
- Trinity765
- Posts: 2321
- Joined: Fri Nov 06, 2020 2:27 pm
- Location: Brighton
- Has thanked: 2442 times
- Been thanked: 2398 times
Re: Cleaning exhaust headers
At about 85% I've put it on a shelf in the conservatory where it will be blasted by the sun if the sun comes out. Once it's dry, I may sit with it on my lap one evening and pick bits out and straighten some fins. There's a lot of small stone chips in it preventing the dusty dirt from washing out. That with some touch up paint and it will look a lot better than it did. Again, I'm sorry I didn't take a before picture but will try and find one on my phone that will give you lot an idea.Taipan wrote: ↑Tue Feb 15, 2022 9:47 am TBH I'd have let it soak in a suitable receptacle overnight, then took a jet wash to the back of it. It's rare that won't clean it out, or at least 95% of it, give or take. Bent fins can be rolled out with a toothpick. Stick it on a rad indoors until its good and warm/hot then apply a few dust coats of satin black. Job jobbed.
- Yorick
- Posts: 16756
- Joined: Sat Mar 14, 2020 8:20 pm
- Location: Paradise
- Has thanked: 10282 times
- Been thanked: 6894 times
- Yorick
- Posts: 16756
- Joined: Sat Mar 14, 2020 8:20 pm
- Location: Paradise
- Has thanked: 10282 times
- Been thanked: 6894 times
-
- Posts: 11236
- Joined: Mon Mar 16, 2020 6:40 pm
- Location: The road of many manky motorcycles
- Has thanked: 607 times
- Been thanked: 4125 times