What was the Curtis outcome?

[Mr Moofo]

@MingtheMerciless - have they come back to you with a post mortem on what the issue was ?

[weeksy]

"yeah it's fucked mate"

[Mr Moofo]

"yeah it's fucked mate"

But that wouldn't be the answer from the marketing department

[MingtheMerciless]

It’s been sent back to them and they say it’ll get sorted , it arrived with them late last week and I suspect they’ll need to get some new dropouts ordered from paragon in the US so I’m not expecting a quick turn around.

As to the cause, I’ll see what they say once they have debrazed the old dropout out.

[MingtheMerciless]

Being repaired and re sprayed in colour of my choice.

[Mr Moofo]

Being repaired and re sprayed in colour of my choice.

And presumably an explanation as to why to failed.

Shocking Pink will look good going over Firle!

[MingtheMerciless]

Curtis are at a loss, it's the first dropout that's failed like that, no sign of an internal defect on the crack face. They have people riding AM9's much larger than me and in far more rocky area and no failures.

Chalk it up to shit happens.

Leaning towards Kawasaki Green or Orange.

[MingtheMerciless]

B8B2241E-6150-413D-BF00-3D71D4C7F2A1.jpeg (925.95 KiB) Viewed 425 times

It’s back!

[MingtheMerciless]

Most of the invisframe fitted today along with some proper 3M helitape stuff on the down tube and other areas vulnerable to rub and strikes. A few more bits to fit and then I can start refitting parts.

[weeksy]

Most of the invisframe fitted today along with some proper 3M helitape stuff on the down tube and other areas vulnerable to rub and strikes. A few more bits to fit and then I can start refitting parts.

I've recently fitted 2 dyedbro kits. They're not as refined as invisiframe but a lot thicker material

[MingtheMerciless]

Also had a call from Curtis to ask if I had taken delivery of the frame, they've actually changed the dropout design because of this and upped the strength by around 20% according to their calculations (they're 1mm thicker now).

[irie]

Also had a call from Curtis to ask if I had taken delivery of the frame, they've actually changed the dropout design because of this and upped the strength by around 20% according to their calculations (they're 1mm thicker now).

You can work out for yourself if the "20% stronger" is true using Young's Modulus.

[irie]

Also had a call from Curtis to ask if I had taken delivery of the frame, they've actually changed the dropout design because of this and upped the strength by around 20% according to their calculations (they're 1mm thicker now).

You can work out for yourself if the "20% stronger" is true using Young's Modulus (assuming by "stronger" they mean "stiffer").

[Mr Moofo]

Also had a call from Curtis to ask if I had taken delivery of the frame, they've actually changed the dropout design because of this and upped the strength by around 20% according to their calculations (they're 1mm thicker now).

They had to beef it up because you is hard - or because they are now going to have to do a recall as they under-engineered?
Odd that a company with such a good reputation could build too "light".

[MingtheMerciless]

Also had a call from Curtis to ask if I had taken delivery of the frame, they've actually changed the dropout design because of this and upped the strength by around 20% according to their calculations (they're 1mm thicker now).

They had to beef it up because you is hard - or because they are now going to have to do a recall as they under-engineered?
Odd that a company with such a good reputation could build too "light".

It’s the first one that’s broken like that and they’ve built them for years so I think it has been beefed up as a modicum of caution rather than built too light.

[MingtheMerciless]

5731C561-0A88-4017-9FDB-952BACCE3BBF.jpeg (1.66 MiB) Viewed 319 times

Test ride tmrw

[Mr Moofo]

Looking good ...
Will look better with a bit on mud on it